| Key | Value |
|---|---|
| CRC32 | 7334E8C1 |
| FileName | etc-setserial |
| FileSize | 1346 |
| MD5 | 2C9D7243FF80929E0884F8EA4B433073 |
| OpSystemCode | {'MfgCode': '1006', 'OpSystemCode': '362', 'OpSystemName': 'TBD', 'OpSystemVersion': 'none'} |
| ProductCode | {'ApplicationType': 'Operating System', 'Language': 'English', 'MfgCode': '535', 'OpSystemCode': '51', 'ProductCode': '8183', 'ProductName': 'LXFDVD94 (Ubuntu 7.04 Mandriva 2007 Spring Free Debian 4.0 SimplyMepis 6.5)', 'ProductVersion': '#94 July 2007'} |
| RDS:package_id | 8183 |
| SHA-1 | F38FE0EAF95194528A1ACBE283B71212A212BFB7 |
| SHA-256 | 1BB794C2F0FCB4971548A6E1B5DE6DF0C8FAD2EFFFB12636B12D6E582CF7AA03 |
| SSDEEP | 24:aXnl3Kof22Ha112eU5s9v59s9y/kDBqSGsndwh8rgzd:Ulao5611Ys9B9s9yEBqlsn1rg5 |
| SpecialCode | |
| TLSH | T1FC215442E25A7FB32E170031178B22A9272355FF04A499C170DFED422FE5AC197637D9 |
| db | nsrl_legacy |
| insert-timestamp | 1648773246.7748463 |
| source | RDS_2022.03.1_legacy.db |
| hashlookup:parent-total | 17 |
| hashlookup:trust | 100 |
The searched file hash is included in 17 parent files which include package known and seen by metalookup. A sample is included below:
| Key | Value |
|---|---|
| FileSize | 62950 |
| MD5 | 5E84B6B1ABCEF346425137C4D8348F64 |
| PackageDescription | controls configuration of serial ports Set and/or report the configuration information associated with a serial port. This information includes what I/O port and which IRQ a particular serial port is using. . This version has a completely new approach to configuration, so if you have a setup other than the standard ttyS0 and 1, you will have to get your hands dirty. . By default, only COM1-4 are configured by the kernel, using IRQ 3 and 4. If you have other serial ports (such as an AST Fourport card), or if you have mapped the IRQs differently (perhaps COM3 and 4 to other IRQs to allow concurrent access with COM1 and 2) then you must have this package. |
| PackageMaintainer | Jonas Genannt <jonas.genannt@capi2name.de> |
| PackageName | setserial |
| PackageSection | comm |
| PackageVersion | 2.17-43 |
| SHA-1 | 00C9AD2E753D5BD869635733AB3343E52803C934 |
| SHA-256 | 08903EA1C6979FF5B08486B198079C417902CA8C225CDA412460B3AE41166BAD |
| Key | Value |
|---|---|
| FileSize | 59130 |
| MD5 | 1BE7078997FFBAB703D1A32DFE30108A |
| PackageDescription | controls configuration of serial ports Set and/or report the configuration information associated with a serial port. This information includes what I/O port and which IRQ a particular serial port is using. . This version has a completely new approach to configuration, so if you have a setup other than the standard ttyS0 and 1, you will have to get your hands dirty. . By default, only COM1-4 are configured by the kernel, using IRQ 3 and 4. If you have other serial ports (such as an AST Fourport card), or if you have mapped the IRQs differently (perhaps COM3 and 4 to other IRQs to allow concurrent access with COM1 and 2) then you must have this package. |
| PackageMaintainer | Jonas Genannt <jonas.genannt@capi2name.de> |
| PackageName | setserial |
| PackageSection | comm |
| PackageVersion | 2.17-43 |
| SHA-1 | 0185D99904BA28DC0ABE11F10E201745E908DF22 |
| SHA-256 | 2622FD85BDDD78E1B89FDEC5F9D0D2E145D1C6C7D065A7E5901DA9AED562B77E |
| Key | Value |
|---|---|
| FileSize | 52898 |
| MD5 | 34FDFEDBEBBCBB5578B1C81673B1824B |
| PackageDescription | Controls configuration of serial ports Set and/or report the configuration information associated with a serial port. This information includes what I/O port and which IRQ a particular serial port is using. . This version has a completely new approach to configuration, so if you have a setup other than the standard ttyS0 and 1, you will have to get your hands dirty. . By default, only COM1-4 are configured by the kernel, using IRQ 3 and 4. If you have other serial ports (such as an AST Fourport card), or if you have mapped the IRQs differently (perhaps COM3 and 4 to other IRQs to allow concurrent access with COM1 and 2) then you must have this package. |
| PackageMaintainer | Ola Lundqvist <opal@debian.org> |
| PackageName | setserial |
| PackageSection | base |
| PackageVersion | 2.17-39 |
| SHA-1 | 19D8198A2B33DA92E8AD11279E11F6D64F7BE604 |
| SHA-256 | 68F6130A31312DA9E557FE0B23533F208B26E4E6FA3F6D956EB177806D5B3BD9 |
| Key | Value |
|---|---|
| FileSize | 55916 |
| MD5 | 058207712AC397DD6214BCF84C6D3219 |
| PackageDescription | controls configuration of serial ports Set and/or report the configuration information associated with a serial port. This information includes what I/O port and which IRQ a particular serial port is using. . This version has a completely new approach to configuration, so if you have a setup other than the standard ttyS0 and 1, you will have to get your hands dirty. . By default, only COM1-4 are configured by the kernel, using IRQ 3 and 4. If you have other serial ports (such as an AST Fourport card), or if you have mapped the IRQs differently (perhaps COM3 and 4 to other IRQs to allow concurrent access with COM1 and 2) then you must have this package. |
| PackageMaintainer | Ola Lundqvist <opal@debian.org> |
| PackageName | setserial |
| PackageSection | comm |
| PackageVersion | 2.17-41 |
| SHA-1 | 1D54BC91454D8B4B74B9C3EAE1566EFB8209BCCE |
| SHA-256 | 4046E9698CB22FBA36C5CE6B21AA1734A6B6E3354961E4D2B4C897313620727A |
| Key | Value |
|---|---|
| FileSize | 53870 |
| MD5 | 2BDCCB718E818C80A7CBD11A24220161 |
| PackageDescription | Controls configuration of serial ports Set and/or report the configuration information associated with a serial port. This information includes what I/O port and which IRQ a particular serial port is using. . This version has a completely new approach to configuration, so if you have a setup other than the standard ttyS0 and 1, you will have to get your hands dirty. . By default, only COM1-4 are configured by the kernel, using IRQ 3 and 4. If you have other serial ports (such as an AST Fourport card), or if you have mapped the IRQs differently (perhaps COM3 and 4 to other IRQs to allow concurrent access with COM1 and 2) then you must have this package. |
| PackageMaintainer | Ola Lundqvist <opal@debian.org> |
| PackageName | setserial |
| PackageSection | base |
| PackageVersion | 2.17-39 |
| SHA-1 | 1DC9748A1576B6577FE9238737ED956B6077DD39 |
| SHA-256 | E29C93C33D8098849BAF203F58416C4FEEE2441E3DD0B19192A8FB2DB84CB85E |
| Key | Value |
|---|---|
| CRC32 | C40A29E4 |
| FileName | setserial_2.17-43_i386.deb |
| FileSize | 57832 |
| MD5 | E9C14F4A5A1A7F930D676D335B326FB0 |
| OpSystemCode | 362 |
| PackageDescription | controls configuration of serial ports Set and/or report the configuration information associated with a serial port. This information includes what I/O port and which IRQ a particular serial port is using. . This version has a completely new approach to configuration, so if you have a setup other than the standard ttyS0 and 1, you will have to get your hands dirty. . By default, only COM1-4 are configured by the kernel, using IRQ 3 and 4. If you have other serial ports (such as an AST Fourport card), or if you have mapped the IRQs differently (perhaps COM3 and 4 to other IRQs to allow concurrent access with COM1 and 2) then you must have this package. |
| PackageMaintainer | Jonas Genannt <jonas.genannt@capi2name.de> |
| PackageName | setserial |
| PackageSection | comm |
| PackageVersion | 2.17-43 |
| ProductCode | 8183 |
| RDS:package_id | 8183 |
| SHA-1 | 1E401DA852F4A49D19218516154FD19E8A1E93BD |
| SHA-256 | 55F9C71ECFA28C90A67CAADAFFA195B20E938B16B92297D14E62E3E59FE68653 |
| SpecialCode | |
| db | nsrl_legacy |
| insert-timestamp | 1648717525.4845686 |
| nsrl-sha256 | rds241-sha256.zip |
| source | RDS_2022.03.1_legacy.db |
| Key | Value |
|---|---|
| FileName | setserial_2.17-39_i386.deb |
| FileSize | 53226 |
| MD5 | CBAFEB25272B39E407E0D348748C924E |
| PackageDescription | Controls configuration of serial ports Set and/or report the configuration information associated with a serial port. This information includes what I/O port and which IRQ a particular serial port is using. . This version has a completely new approach to configuration, so if you have a setup other than the standard ttyS0 and 1, you will have to get your hands dirty. . By default, only COM1-4 are configured by the kernel, using IRQ 3 and 4. If you have other serial ports (such as an AST Fourport card), or if you have mapped the IRQs differently (perhaps COM3 and 4 to other IRQs to allow concurrent access with COM1 and 2) then you must have this package. |
| PackageMaintainer | Ola Lundqvist <opal@debian.org> |
| PackageName | setserial |
| PackageSection | base |
| PackageVersion | 2.17-39 |
| SHA-1 | 2BF9CA5AB455A6656F81B626ECBF3091F085DB9F |
| SHA-256 | 3B290C4973C2719B50B101B5314DEB767F0C9E82DED3B8F59CDC4A15F90D51E8 |
| nsrl-sha256 | rds241-sha256.zip |
| Key | Value |
|---|---|
| FileSize | 57142 |
| MD5 | A453DD92CFEE978F2DDC1BF791378C4F |
| PackageDescription | Controls configuration of serial ports Set and/or report the configuration information associated with a serial port. This information includes what I/O port and which IRQ a particular serial port is using. . This version has a completely new approach to configuration, so if you have a setup other than the standard ttyS0 and 1, you will have to get your hands dirty. . By default, only COM1-4 are configured by the kernel, using IRQ 3 and 4. If you have other serial ports (such as an AST Fourport card), or if you have mapped the IRQs differently (perhaps COM3 and 4 to other IRQs to allow concurrent access with COM1 and 2) then you must have this package. |
| PackageMaintainer | Ola Lundqvist <opal@debian.org> |
| PackageName | setserial |
| PackageSection | base |
| PackageVersion | 2.17-39 |
| SHA-1 | 3338EDEB2607E0D250693F77EE09F680E221D46F |
| SHA-256 | 41634E7D4BA176E347CC433BF28CFD38C842D9AE77D3B6D6C282DA3843BF9254 |
| Key | Value |
|---|---|
| FileSize | 59312 |
| MD5 | 0CDB76EDE3BEEDFE161CA169969655DB |
| PackageDescription | controls configuration of serial ports Set and/or report the configuration information associated with a serial port. This information includes what I/O port and which IRQ a particular serial port is using. . This version has a completely new approach to configuration, so if you have a setup other than the standard ttyS0 and 1, you will have to get your hands dirty. . By default, only COM1-4 are configured by the kernel, using IRQ 3 and 4. If you have other serial ports (such as an AST Fourport card), or if you have mapped the IRQs differently (perhaps COM3 and 4 to other IRQs to allow concurrent access with COM1 and 2) then you must have this package. |
| PackageMaintainer | Jonas Genannt <jonas.genannt@capi2name.de> |
| PackageName | setserial |
| PackageSection | comm |
| PackageVersion | 2.17-43 |
| SHA-1 | 34A7421920FA1BC0118595D7BE49F24E16C37C28 |
| SHA-256 | 5B56610EAD2D08D3947D34E438AED27D58E46C4631C61859A31B51DAD986CE3A |
| Key | Value |
|---|---|
| FileSize | 52300 |
| MD5 | D356F1C1C165A0CF9CC1C4D0FD4C488D |
| PackageDescription | Controls configuration of serial ports Set and/or report the configuration information associated with a serial port. This information includes what I/O port and which IRQ a particular serial port is using. . This version has a completely new approach to configuration, so if you have a setup other than the standard ttyS0 and 1, you will have to get your hands dirty. . By default, only COM1-4 are configured by the kernel, using IRQ 3 and 4. If you have other serial ports (such as an AST Fourport card), or if you have mapped the IRQs differently (perhaps COM3 and 4 to other IRQs to allow concurrent access with COM1 and 2) then you must have this package. |
| PackageMaintainer | Ola Lundqvist <opal@debian.org> |
| PackageName | setserial |
| PackageSection | base |
| PackageVersion | 2.17-39 |
| SHA-1 | 432B1AB8464514596B8A20901DCB29BF5382A3DD |
| SHA-256 | EC28416BEC4BAC2A33B334957E65EE715374B8886C5C02F737EF4616FB04332C |