Parents (Total: 17)

The searched file hash is included in 17 parent files which include package known and seen by metalookup. A sample is included below:

Key	Value
MD5	9F6916AEE96E99C7D46A56A0D13DF846
PackageArch	noarch
PackageDescription	The intent of File::ShareDir is to provide a companion to Class::Inspector and File::HomeDir, modules that take a process that is well-known by advanced Perl developers but gets a little tricky, and make it more available to the larger Perl community. Quite often you want or need your Perl module (CPAN or otherwise) to have access to a large amount of read-only data that is stored on the file-system at run-time. On a linux-like system, this would be in a place such as /usr/share, however Perl runs on a wide variety of different systems, and so the use of any one location is unreliable. Perl provides a little-known method for doing this, but almost nobody is aware that it exists. As a result, module authors often go through some very strange ways to make the data available to their code. The most common of these is to dump the data out to an enormous Perl data structure and save it into the module itself. The result are enormous multi-megabyte .pm files that chew up a lot of memory needlessly. Another method is to put the data "file" after the __DATA__ compiler tag and limit yourself to access as a filehandle. The problem to solve is really quite simple. 1. Write the data files to the system at install time. 2. Know where you put them at run-time. Perl's install system creates an "auto" directory for both every distribution and for every module file. These are used by a couple of different auto-loading systems to store code fragments generated at install time, and various other modules written by the Perl "ancient masters". But the same mechanism is available to any dist or module to store any sort of data.
PackageName	perl-File-ShareDir
PackageRelease	lp153.33.12
PackageVersion	1.118
SHA-1	02E9ECA84EA8DE5D3D7C1A6B8CACD5019ED0213C
SHA-256	B29F41CAA5BB10C68759C51AA44F55D17658F636BBC88174474DFA147DFE999D

Key	Value
MD5	D435B0E64EB2961B7BA5D133E55A9218
PackageArch	noarch
PackageDescription	The intent of File::ShareDir is to provide a companion to Class::Inspector and File::HomeDir, modules that take a process that is well-known by advanced Perl developers but gets a little tricky, and make it more available to the larger Perl community. Quite often you want or need your Perl module (CPAN or otherwise) to have access to a large amount of read-only data that is stored on the file-system at run-time. On a linux-like system, this would be in a place such as /usr/share, however Perl runs on a wide variety of different systems, and so the use of any one location is unreliable. Perl provides a little-known method for doing this, but almost nobody is aware that it exists. As a result, module authors often go through some very strange ways to make the data available to their code. The most common of these is to dump the data out to an enormous Perl data structure and save it into the module itself. The result are enormous multi-megabyte .pm files that chew up a lot of memory needlessly. Another method is to put the data "file" after the __DATA__ compiler tag and limit yourself to access as a filehandle. The problem to solve is really quite simple. 1. Write the data files to the system at install time. 2. Know where you put them at run-time. Perl's install system creates an "auto" directory for both every distribution and for every module file. These are used by a couple of different auto-loading systems to store code fragments generated at install time, and various other modules written by the Perl "ancient masters". But the same mechanism is available to any dist or module to store any sort of data.
PackageName	perl-File-ShareDir
PackageRelease	lp150.33.1
PackageVersion	1.118
SHA-1	16E1F45793DCF02B84B56D19E12AAE9EABEC3853
SHA-256	66AFBBC72A8A19E45D30353DE7868D14D428A08473A9872E9F5A68C0E1FF3915

Key	Value
MD5	91D5039738B75C25A9AC62F09E6FC63D
PackageArch	noarch
PackageDescription	The intent of File::ShareDir is to provide a companion to Class::Inspector and File::HomeDir, modules that take a process that is well-known by advanced Perl developers but gets a little tricky, and make it more available to the larger Perl community. Quite often you want or need your Perl module (CPAN or otherwise) to have access to a large amount of read-only data that is stored on the file-system at run-time. On a linux-like system, this would be in a place such as /usr/share, however Perl runs on a wide variety of different systems, and so the use of any one location is unreliable. Perl provides a little-known method for doing this, but almost nobody is aware that it exists. As a result, module authors often go through some very strange ways to make the data available to their code. The most common of these is to dump the data out to an enormous Perl data structure and save it into the module itself. The result are enormous multi-megabyte .pm files that chew up a lot of memory needlessly. Another method is to put the data "file" after the __DATA__ compiler tag and limit yourself to access as a filehandle. The problem to solve is really quite simple. 1. Write the data files to the system at install time. 2. Know where you put them at run-time. Perl's install system creates an "auto" directory for both every distribution and for every module file. These are used by a couple of different auto-loading systems to store code fragments generated at install time, and various other modules written by the Perl "ancient masters". But the same mechanism is available to any dist or module to store any sort of data.
PackageName	perl-File-ShareDir
PackageRelease	1.3
PackageVersion	1.118
SHA-1	2FCA69E7C6F3C9273001550022CCAC855EAD6616
SHA-256	D8499FE5CD64B286D23006B5353882E49EADC0467D2E8389D91AC6534FF58ACA

Key	Value
MD5	0254F9B04F1A8E4DB065698F892EF04D
PackageArch	noarch
PackageDescription	The intent of File::ShareDir is to provide a companion to Class::Inspector and File::HomeDir, modules that take a process that is well-known by advanced Perl developers but gets a little tricky, and make it more available to the larger Perl community.
PackageMaintainer	Fedora Project
PackageName	perl-File-ShareDir
PackageRelease	2.fc34
PackageVersion	1.118
SHA-1	40021CCAAB4CF4B704AD4F67390CAA4CB8386752
SHA-256	696CAAAEF429D308D8FDE2CBDBF6656B1072EAFC3D3699196C90F59617DA464F

Key	Value
MD5	62847331D48D2AFD9D99781CAB22FA3F
PackageArch	noarch
PackageDescription	The intent of File::ShareDir is to provide a companion to Class::Inspector and File::HomeDir, modules that take a process that is well-known by advanced Perl developers but gets a little tricky, and make it more available to the larger Perl community. Quite often you want or need your Perl module (CPAN or otherwise) to have access to a large amount of read-only data that is stored on the file-system at run-time. On a linux-like system, this would be in a place such as /usr/share, however Perl runs on a wide variety of different systems, and so the use of any one location is unreliable. Perl provides a little-known method for doing this, but almost nobody is aware that it exists. As a result, module authors often go through some very strange ways to make the data available to their code. The most common of these is to dump the data out to an enormous Perl data structure and save it into the module itself. The result are enormous multi-megabyte .pm files that chew up a lot of memory needlessly. Another method is to put the data "file" after the __DATA__ compiler tag and limit yourself to access as a filehandle. The problem to solve is really quite simple. 1. Write the data files to the system at install time. 2. Know where you put them at run-time. Perl's install system creates an "auto" directory for both every distribution and for every module file. These are used by a couple of different auto-loading systems to store code fragments generated at install time, and various other modules written by the Perl "ancient masters". But the same mechanism is available to any dist or module to store any sort of data.
PackageName	perl-File-ShareDir
PackageRelease	33.2
PackageVersion	1.118
SHA-1	4D00EFDEB5B2E343308ED01E2F0E46B9BA79F470
SHA-256	3FE1441B8140B1826AAB615815F0F9B80A33A7D0948AD761999E026B86CB9E4F

Key	Value
MD5	40E11260D1D4361081C7F400AA3369F0
PackageArch	noarch
PackageDescription	The intent of File::ShareDir is to provide a companion to Class::Inspector and File::HomeDir, modules that take a process that is well-known by advanced Perl developers but gets a little tricky, and make it more available to the larger Perl community. Quite often you want or need your Perl module (CPAN or otherwise) to have access to a large amount of read-only data that is stored on the file-system at run-time. On a linux-like system, this would be in a place such as /usr/share, however Perl runs on a wide variety of different systems, and so the use of any one location is unreliable. Perl provides a little-known method for doing this, but almost nobody is aware that it exists. As a result, module authors often go through some very strange ways to make the data available to their code. The most common of these is to dump the data out to an enormous Perl data structure and save it into the module itself. The result are enormous multi-megabyte .pm files that chew up a lot of memory needlessly. Another method is to put the data "file" after the __DATA__ compiler tag and limit yourself to access as a filehandle. The problem to solve is really quite simple. 1. Write the data files to the system at install time. 2. Know where you put them at run-time. Perl's install system creates an "auto" directory for both every distribution and for every module file. These are used by a couple of different auto-loading systems to store code fragments generated at install time, and various other modules written by the Perl "ancient masters". But the same mechanism is available to any dist or module to store any sort of data.
PackageName	perl-File-ShareDir
PackageRelease	33.1
PackageVersion	1.118
SHA-1	4D9780830D0CE604C0C1DD56A1B5BE07A91B3163
SHA-256	248D52E502AA1A28A7908433C7BE8886E0D71204DD5E0E5395B7395B4DF4F90B

Key	Value
MD5	3B881C3193DF170FF38B792ADB22BC16
PackageArch	noarch
PackageDescription	The intent of File::ShareDir is to provide a companion to Class::Inspector and File::HomeDir, modules that take a process that is well-known by advanced Perl developers but gets a little tricky, and make it more available to the larger Perl community. Quite often you want or need your Perl module (CPAN or otherwise) to have access to a large amount of read-only data that is stored on the file-system at run-time. On a linux-like system, this would be in a place such as /usr/share, however Perl runs on a wide variety of different systems, and so the use of any one location is unreliable. Perl provides a little-known method for doing this, but almost nobody is aware that it exists. As a result, module authors often go through some very strange ways to make the data available to their code. The most common of these is to dump the data out to an enormous Perl data structure and save it into the module itself. The result are enormous multi-megabyte .pm files that chew up a lot of memory needlessly. Another method is to put the data "file" after the __DATA__ compiler tag and limit yourself to access as a filehandle. The problem to solve is really quite simple. 1. Write the data files to the system at install time. 2. Know where you put them at run-time. Perl's install system creates an "auto" directory for both every distribution and for every module file. These are used by a couple of different auto-loading systems to store code fragments generated at install time, and various other modules written by the Perl "ancient masters". But the same mechanism is available to any dist or module to store any sort of data.
PackageName	perl-File-ShareDir
PackageRelease	3.1
PackageVersion	1.118
SHA-1	569C88CEF815A93268BC7477DE9E006B3AFE0EC9
SHA-256	8D754C624EF74C13E08AFE7CF9B6F1AC9E49FAAA0170FC5A0CE4671297BE4941

Key	Value
MD5	D20FCAC3CCA8215B98F3463CCDF3CBFD
PackageArch	noarch
PackageDescription	Locate per-dist and per-module shared files
PackageMaintainer	tv <tv>
PackageName	perl-File-ShareDir
PackageRelease	1.mga8
PackageVersion	1.118.0
SHA-1	5E453B7E54A0221C76609B9B06B271B7455813A2
SHA-256	92A1E2AF6674928E83A92E81685C9F8D0023967601817D5974B561B98761EA9C

Key	Value
MD5	C240F70D5F95C0F301BED394B22B572B
PackageArch	noarch
PackageDescription	The intent of File::ShareDir is to provide a companion to Class::Inspector and File::HomeDir, modules that take a process that is well-known by advanced Perl developers but gets a little tricky, and make it more available to the larger Perl community. Quite often you want or need your Perl module (CPAN or otherwise) to have access to a large amount of read-only data that is stored on the file-system at run-time. On a linux-like system, this would be in a place such as /usr/share, however Perl runs on a wide variety of different systems, and so the use of any one location is unreliable. Perl provides a little-known method for doing this, but almost nobody is aware that it exists. As a result, module authors often go through some very strange ways to make the data available to their code. The most common of these is to dump the data out to an enormous Perl data structure and save it into the module itself. The result are enormous multi-megabyte .pm files that chew up a lot of memory needlessly. Another method is to put the data "file" after the __DATA__ compiler tag and limit yourself to access as a filehandle. The problem to solve is really quite simple. 1. Write the data files to the system at install time. 2. Know where you put them at run-time. Perl's install system creates an "auto" directory for both every distribution and for every module file. These are used by a couple of different auto-loading systems to store code fragments generated at install time, and various other modules written by the Perl "ancient masters". But the same mechanism is available to any dist or module to store any sort of data.
PackageName	perl-File-ShareDir
PackageRelease	33.1
PackageVersion	1.118
SHA-1	60C836CADA625728563A098446579C3DCFFCBCE3
SHA-256	D3732E9FE45EB9777BCB60531998C27ED743281EE6E966D4DC638B8B8425B7A1

Key	Value
MD5	6DE4876E9BB4D6078CD41EBEFEB98636
PackageArch	noarch
PackageDescription	The intent of File::ShareDir is to provide a companion to Class::Inspector and File::HomeDir, modules that take a process that is well-known by advanced Perl developers but gets a little tricky, and make it more available to the larger Perl community. Quite often you want or need your Perl module (CPAN or otherwise) to have access to a large amount of read-only data that is stored on the file-system at run-time. On a linux-like system, this would be in a place such as /usr/share, however Perl runs on a wide variety of different systems, and so the use of any one location is unreliable. Perl provides a little-known method for doing this, but almost nobody is aware that it exists. As a result, module authors often go through some very strange ways to make the data available to their code. The most common of these is to dump the data out to an enormous Perl data structure and save it into the module itself. The result are enormous multi-megabyte .pm files that chew up a lot of memory needlessly. Another method is to put the data "file" after the __DATA__ compiler tag and limit yourself to access as a filehandle. The problem to solve is really quite simple. 1. Write the data files to the system at install time. 2. Know where you put them at run-time. Perl's install system creates an "auto" directory for both every distribution and for every module file. These are used by a couple of different auto-loading systems to store code fragments generated at install time, and various other modules written by the Perl "ancient masters". But the same mechanism is available to any dist or module to store any sort of data.
PackageName	perl-File-ShareDir
PackageRelease	33.1
PackageVersion	1.118
SHA-1	78C1F00D07F8F0EB4B07D5B1DFC9C89F749F0C5D
SHA-256	2EF8CC16A650A4128FB496629EB37C81E41C3A90DF993DC23F88068BC9DDAF46