Parents (Total: 85)

The searched file hash is included in 85 parent files which include package known and seen by metalookup. A sample is included below:

Key	Value
FileSize	938206
MD5	0918A88EB712F6FF0167705B30C09EAD
PackageDescription	scripts to make the life of a Debian Package maintainer easier Contains the following scripts, dependencies/recommendations shown in brackets afterwards: . - annotate-output: run a command and prepend time and stream (O for stdout, E for stderr) for every line of output - archpath: print tla/Bazaar package names [tla | bazaar] - bts: a command-line tool for manipulating the BTS [www-browser, libauthen-sasl-perl, libnet-smtps-perl, libsoap-lite-perl, liburi-perl, libwww-perl, bsd-mailx | mailx] - build-rdeps: search for all packages that build-depend on a given package [dctrl-tools, dose-extra] - chdist: tool to easily play with several distributions [dctrl-tools] - checkbashisms: check whether a /bin/sh script contains any common bash-specific constructs - cowpoke: upload a Debian source package to a cowbuilder host and build it, optionally also signing and uploading the result to an incoming queue [ssh-client] - cvs-debi, cvs-debc: wrappers around debi and debc respectively (see below) which allow them to be called from the CVS working directory [cvs-buildpackage] - cvs-debrelease: wrapper around debrelease which allows it to be called from the CVS working directory [cvs-buildpackage, dupload | dput, ssh-client] - cvs-debuild: wrapper for cvs-buildpackage to use debuild as its package building program [cvs-buildpackage, fakeroot, lintian, gnupg | gnupg2] - dcmd: run a given command replacing the name of a .changes or .dsc file with each of the files referenced therein - dcontrol: remotely query package and source control files for all Debian distributions [liburl-perl, libwww-perl] - dd-list: given a list of packages, pretty-print it ordered by maintainer - debc: display the contents of just-built .debs - debchange/dch: automagically add entries to debian/changelog files [libdistro-info-perl, libsoap-lite-perl] - debcheckout: checkout the development repository of a Debian package - debclean: clean a Debian source tree [fakeroot] - debcommit: commit changes to cvs, darcs, svn, svk, tla, bzr, git, or hg, basing commit message on changelog [cvs | darcs | subversion | svk | tla | bzr | git-core | mercurial, libtimedate-perl] - debdiff: compare two versions of a Debian package to check for added and removed files. Use the diffoscope package for deep comparisons. [wdiff, patchutils] - debi: install a just-built package - debpkg: dpkg wrapper to be able to manage/test packages without su - debrepro: reproducibility tester for Debian packages [faketime, diffoscope, disorderfs] - debrelease: wrapper around dupload or dput [dupload | dput, ssh-client] - debsign, debrsign: sign a .changes/.dsc pair without needing any of the rest of the package to be present; can sign the pair remotely or fetch the pair from a remote machine for signing [gnupg | gnupg2, debian-keyring, ssh-client] - debsnap: grab packages from http://snapshot.debian.org [libwww-perl] - debuild: wrapper to build a package without having to su or worry about how to invoke dpkg to build using fakeroot. Also deals with common environment problems, umask etc. [fakeroot, lintian, gnupg | gnupg2] - deb-reversion: increase a binary package version number and repacks the package, useful for porters and the like - dep3changelog: generate a changelog entry from a DEP3-style patch header - desktop2menu: given a freedesktop.org desktop file, generate a skeleton for a menu file [libfile-desktopentry-perl] - dget: download Debian source and binary packages [wget | curl] - diff2patches: extract patches from a .diff.gz file placing them under debian/ or, if present, debian/patches [patchutils] - dpkg-depcheck, dpkg-genbuilddeps: determine the packages used during the build of a Debian package; useful for determining the Build-Depends control field needed [build-essential, strace] - dscextract: extract a single file from a Debian source package [patchutils] - dscverify: verify the integrity of a Debian package from the .changes or .dsc files [gnupg | gnupg2, debian-keyring] - edit-patch: add/edit a patch for a source package and commit the changes [quilt | dpatch | cdbs] - getbuildlog: download package build logs from Debian auto-builders [wget] - git-deborig: try to produce Debian orig.tar using git-archive(1) [libdpkg-perl, libgit-wrapper-perl, liblist-compare-perl] - grep-excuses: grep the update_excuses.html file for your packages [libterm-size-perl, wget, w3m] - list-unreleased: search for unreleased packages - manpage-alert: locate binaries without corresponding manpages [man-db] - mass-bug: mass-file bug reports [bsd-mailx | mailx] - mergechanges: merge .changes files from the same release but built on different architectures - mk-build-deps: given a package name and/or control file, generate a binary package which may be installed to satisfy the build-dependencies of the given package [equivs] - mk-origtargz: rename upstream tarball, optionally changing the compression and removing unwanted files [unzip, xz-utils, file] - namecheck: check project names are not already taken - nmudiff: mail a diff of the current package against the previous version to the BTS to assist in tracking NMUs [patchutils, mutt] - origtargz: fetch the orig tarball of a Debian package from various sources, and unpack it - plotchangelog: view a nice plot of the data in a changelog file [libtimedate-perl, gnuplot] - pts-subscribe: subscribe to the PTS for a limited period of time [bsd-mailx | mailx, at] - rc-alert: list installed packages which have release-critical bugs [wget | curl] - rmadison: remotely query the Debian archive database about packages [liburi-perl, wget | curl] - sadt: run DEP-8 tests [python3-debian] - suspicious-source: output a list of files which are not common source files [python3-magic] - svnpath: print Subversion repository paths [subversion] - tagpending: run from a Debian source tree and tag bugs that are to be closed in the latest changelog as pending [libsoap-lite-perl] - transition-check: check a list of source packages for involvement in transitions for which uploads to unstable are currently blocked [libwww-perl, libyaml-syck-perl] - uscan: scan upstream sites for new releases of packages [gpgv | gpgv2, gnupg |gnupg2, liblwp-protocol-https-perl, libwww-perl, unzip, xz-utils, file] - uupdate: integrate upstream changes into a source package [patch] - what-patch: determine what patch system, if any, a source package is using [patchutils] - whodepends: check which maintainers' packages depend on a package - who-uploads: determine the most recent uploaders of a package to the Debian archive [gnupg | gnupg2, debian-keyring, debian-maintainers, wget] - wnpp-alert: list installed packages which are orphaned or up for adoption [wget | curl] - wnpp-check: check whether there is an open request for packaging or intention to package bug for a package [wget | curl] - who-permits-upload: Retrieve information about Debian Maintainer access control lists [gnupg | gnupg2, libencode-locale-perl, libwww-perl, debian-keyring] - wrap-and-sort: wrap long lines and sort items in packaging files [python3-debian] . Also included are a set of example mail filters for filtering mail from Debian mailing lists using exim, procmail, etc.
PackageMaintainer	Devscripts Maintainers <devscripts@packages.debian.org>
PackageName	devscripts
PackageSection	devel
PackageVersion	2.17.6+deb9u2
SHA-1	046E453673265C6C335505A710E32627BEB1DD13
SHA-256	6D63C64B3445AD97415D6773BC933C39045FE013F1274118167BCB0974095138

Key	Value
FileSize	870460
MD5	F92AE4807F04EC868882BAB5E894D63E
PackageDescription	scripts to make the life of a Debian Package maintainer easier Contains the following scripts, dependencies/recommendations shown in brackets afterwards: . - annotate-output: run a command and prepend time and stream (O for stdout, E for stderr) for every line of output - archpath: print tla/Bazaar package names [tla | bazaar] - bts: a command-line tool for manipulating the BTS [www-browser, libauthen-sasl-perl, libnet-smtps-perl, libsoap-lite-perl, liburi-perl, libwww-perl, bsd-mailx | mailx] - build-rdeps: search for all packages that build-depend on a given package [dctrl-tools, dose-extra, libdpkg-perl] - chdist: tool to easily play with several distributions [dctrl-tools] - checkbashisms: check whether a /bin/sh script contains any common bash-specific constructs - cowpoke: upload a Debian source package to a cowbuilder host and build it, optionally also signing and uploading the result to an incoming queue [ssh-client] - cvs-debi, cvs-debc: wrappers around debi and debc respectively (see below) which allow them to be called from the CVS working directory [cvs-buildpackage] - cvs-debrelease: wrapper around debrelease which allows it to be called from the CVS working directory [cvs-buildpackage, dupload | dput, ssh-client] - cvs-debuild: wrapper for cvs-buildpackage to use debuild as its package building program [cvs-buildpackage, fakeroot, lintian, gnupg | gnupg2] - dcmd: run a given command replacing the name of a .changes or .dsc file with each of the files referenced therein - dcontrol: remotely query package and source control files for all Debian distributions [liburl-perl, libwww-perl] - dd-list: given a list of packages, pretty-print it ordered by maintainer - debc: display the contents of just-built .debs - debchange/dch: automagically add entries to debian/changelog files [libdistro-info-perl, libsoap-lite-perl] - debcheckout: checkout the development repository of a Debian package - debclean: clean a Debian source tree [fakeroot] - debcommit: commit changes to cvs, darcs, svn, svk, tla, bzr, git, or hg, basing commit message on changelog [cvs | darcs | subversion | svk | tla | bzr | git-core | mercurial, libtimedate-perl] - debdiff: compare two versions of a Debian package to check for added and removed files. Use the diffoscope package for deep comparisons. [wdiff, patchutils] - debdiff-apply: apply unified diffs of two Debian source packages, such as generated by debdiff, to a target source package [python3-unidiff, quilt] - debi: install a just-built package - debpkg: dpkg wrapper to be able to manage/test packages without su - debrepro: reproducibility tester for Debian packages [faketime, diffoscope, disorderfs] - debrelease: wrapper around dupload or dput [dupload | dput, ssh-client] - debsign, debrsign: sign a .changes/.dsc pair without needing any of the rest of the package to be present; can sign the pair remotely or fetch the pair from a remote machine for signing [gnupg | gnupg2, debian-keyring, ssh-client] - debsnap: grab packages from http://snapshot.debian.org [libwww-perl] - debuild: wrapper to build a package without having to su or worry about how to invoke dpkg to build using fakeroot. Also deals with common environment problems, umask etc. [fakeroot, lintian, gnupg | gnupg2] - deb-reversion: increase a binary package version number and repacks the package, useful for porters and the like - dep3changelog: generate a changelog entry from a DEP3-style patch header - desktop2menu: given a freedesktop.org desktop file, generate a skeleton for a menu file [libfile-desktopentry-perl] - dget: download Debian source and binary packages [wget | curl] - diff2patches: extract patches from a .diff.gz file placing them under debian/ or, if present, debian/patches [patchutils] - dpkg-depcheck, dpkg-genbuilddeps: determine the packages used during the build of a Debian package; useful for determining the Build-Depends control field needed [build-essential, strace] - dscextract: extract a single file from a Debian source package [patchutils] - dscverify: verify the integrity of a Debian package from the .changes or .dsc files [gnupg | gnupg2, debian-keyring] - edit-patch: add/edit a patch for a source package and commit the changes [quilt | dpatch | cdbs] - getbuildlog: download package build logs from Debian auto-builders [wget] - git-deborig: try to produce Debian orig.tar using git-archive(1) [libdpkg-perl, libgit-wrapper-perl, liblist-compare-perl] - grep-excuses: grep britney's excuses for your packages [libterm-size-perl, libyaml-syck-perl, wget, w3m] - hardening-check: report the hardening characteristics of a set of binaries - list-unreleased: search for unreleased packages - ltnu: List all uploads of packages by the given uploader or maintainer and display them ordered by the last upload [postgresql-client] - manpage-alert: locate binaries without corresponding manpages [man-db] - mass-bug: mass-file bug reports [bsd-mailx | mailx] - mergechanges: merge .changes files from the same release but built on different architectures - mk-build-deps: given a package name and/or control file, generate a binary package which may be installed to satisfy the build-dependencies of the given package [equivs] - mk-origtargz: rename upstream tarball, optionally changing the compression and removing unwanted files [unzip, xz-utils, file] - namecheck: check project names are not already taken - nmudiff: mail a diff of the current package against the previous version to the BTS to assist in tracking NMUs [patchutils, mutt] - origtargz: fetch the orig tarball of a Debian package from various sources, and unpack it - plotchangelog: view a nice plot of the data in a changelog file [libtimedate-perl, gnuplot] - pts-subscribe: subscribe to the PTS for a limited period of time [bsd-mailx | mailx, at] - rc-alert: list installed packages which have release-critical bugs [wget | curl] - reproducible-check: reports on the reproducible status of installed packages [python3-apt, python3-requests, python3-termcolor, python3-xdg] - rmadison: remotely query the Debian archive database about packages [liburi-perl, wget | curl] - sadt: run DEP-8 tests [python3-debian] - suspicious-source: output a list of files which are not common source files [python3-magic] - svnpath: print Subversion repository paths [subversion] - tagpending: run from a Debian source tree and tag bugs that are to be closed in the latest changelog as pending [libsoap-lite-perl] - transition-check: check a list of source packages for involvement in transitions for which uploads to unstable are currently blocked [libwww-perl, libyaml-syck-perl] - uscan: scan upstream sites for new releases of packages [gpgv | gpgv2, gnupg |gnupg2, liblwp-protocol-https-perl, libwww-perl, unzip, xz-utils, file] - uupdate: integrate upstream changes into a source package [patch] - what-patch: determine what patch system, if any, a source package is using [patchutils] - whodepends: check which maintainers' packages depend on a package - who-uploads: determine the most recent uploaders of a package to the Debian archive [gnupg | gnupg2, debian-keyring, debian-maintainers, wget] - wnpp-alert: list installed packages which are orphaned or up for adoption [wget | curl] - wnpp-check: check whether there is an open request for packaging or intention to package bug for a package [wget | curl] - who-permits-upload: Retrieve information about Debian Maintainer access control lists [gnupg | gnupg2, libencode-locale-perl, libwww-perl, debian-keyring] - wrap-and-sort: wrap long lines and sort items in packaging files [python3-debian] . Also included are a set of example mail filters for filtering mail from Debian mailing lists using exim, procmail, etc.
PackageMaintainer	Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
PackageName	devscripts
PackageSection	devel
PackageVersion	2.17.12ubuntu1
SHA-1	05AA2B5414196AA74B3B293D514A21FB9900BDFF
SHA-256	FBFD5423AAA54BF9DD7BDCD078DAEC73E18413D71E04A7803B7E05B8C47B4923

Key	Value
FileSize	832012
MD5	ACDCC9B200A26003D9011757CDF59AF5
PackageDescription	scripts to make the life of a Debian Package maintainer easier Contains the following scripts, dependencies/recommendations shown in brackets afterwards: . - annotate-output: run a command and prepend time and stream (O for stdout, E for stderr) for every line of output - archpath: print tla/Bazaar package names [tla | bazaar] - bts: a command-line tool for manipulating the BTS [www-browser, libauthen-sasl-perl, libnet-smtp-ssl-perl, libsoap-lite-perl, liburi-perl, libwww-perl, bsd-mailx | mailx] - build-rdeps: search for all packages that build-depend on a given package [dctrl-tools, dose-extra] - chdist: tool to easily play with several distributions [dctrl-tools] - checkbashisms: check whether a /bin/sh script contains any common bash-specific constructs - cowpoke: upload a Debian source package to a cowbuilder host and build it, optionally also signing and uploading the result to an incoming queue [ssh-client] - cvs-debi, cvs-debc: wrappers around debi and debc respectively (see below) which allow them to be called from the CVS working directory [cvs-buildpackage] - cvs-debrelease: wrapper around debrelease which allows it to be called from the CVS working directory [cvs-buildpackage, dupload | dput, ssh-client] - cvs-debuild: wrapper for cvs-buildpackage to use debuild as its package building program [cvs-buildpackage, fakeroot, lintian, gnupg | gnupg2] - dcmd: run a given command replacing the name of a .changes or .dsc file with each of the files referenced therein - dcontrol: remotely query package and source control files for all Debian distributions [liburl-perl, libwww-perl] - dd-list: given a list of packages, pretty-print it ordered by maintainer - debc: display the contents of just-built .debs - debchange/dch: automagically add entries to debian/changelog files [libdistro-info-perl, libsoap-lite-perl] - debcheckout: checkout the development repository of a Debian package - debclean: clean a Debian source tree [fakeroot] - debcommit: commit changes to cvs, darcs, svn, svk, tla, bzr, git, or hg, basing commit message on changelog [cvs | darcs | subversion | svk | tla | bzr | git-core | mercurial, libtimedate-perl] - debdiff: compare two versions of a Debian package to check for added and removed files. Use the diffoscope package for deep comparisons. [wdiff, patchutils] - debi: install a just-built package - debpkg: dpkg wrapper to be able to manage/test packages without su - debrepro: reproducibility tester for Debian packages [faketime, diffoscope, disorderfs] - debrelease: wrapper around dupload or dput [dupload | dput, ssh-client] - debsign, debrsign: sign a .changes/.dsc pair without needing any of the rest of the package to be present; can sign the pair remotely or fetch the pair from a remote machine for signing [gnupg | gnupg2, debian-keyring, ssh-client] - debsnap: grab packages from http://snapshot.debian.org [libwww-perl] - debuild: wrapper to build a package without having to su or worry about how to invoke dpkg to build using fakeroot. Also deals with common environment problems, umask etc. [fakeroot, lintian, gnupg | gnupg2] - deb-reversion: increase a binary package version number and repacks the package, useful for porters and the like - dep3changelog: generate a changelog entry from a DEP3-style patch header - desktop2menu: given a freedesktop.org desktop file, generate a skeleton for a menu file [libfile-desktopentry-perl] - dget: download Debian source and binary packages [wget | curl] - diff2patches: extract patches from a .diff.gz file placing them under debian/ or, if present, debian/patches [patchutils] - dpkg-depcheck, dpkg-genbuilddeps: determine the packages used during the build of a Debian package; useful for determining the Build-Depends control field needed [build-essential, strace] - dscextract: extract a single file from a Debian source package [patchutils] - dscverify: verify the integrity of a Debian package from the .changes or .dsc files [gnupg | gnupg2, debian-keyring] - edit-patch: add/edit a patch for a source package and commit the changes [quilt | dpatch | cdbs] - getbuildlog: download package build logs from Debian auto-builders [wget] - grep-excuses: grep the update_excuses.html file for your packages [libterm-size-perl, wget, w3m] - list-unreleased: search for unreleased packages - manpage-alert: locate binaries without corresponding manpages [man-db] - mass-bug: mass-file bug reports [bsd-mailx | mailx] - mergechanges: merge .changes files from the same release but built on different architectures - mk-build-deps: given a package name and/or control file, generate a binary package which may be installed to satisfy the build-dependencies of the given package [equivs] - mk-origtargz: rename upstream tarball, optionally changing the compression and removing unwanted files [unzip, xz-utils, file] - namecheck: check project names are not already taken - nmudiff: mail a diff of the current package against the previous version to the BTS to assist in tracking NMUs [patchutils, mutt] - origtargz: fetch the orig tarball of a Debian package from various sources, and unpack it - plotchangelog: view a nice plot of the data in a changelog file [libtimedate-perl, gnuplot] - pts-subscribe: subscribe to the PTS for a limited period of time [bsd-mailx | mailx, at] - rc-alert: list installed packages which have release-critical bugs [wget | curl] - rmadison: remotely query the Debian archive database about packages [liburi-perl, wget | curl] - sadt: run DEP-8 tests [python3-debian] - suspicious-source: output a list of files which are not common source files [python3-magic] - svnpath: print Subversion repository paths [subversion] - tagpending: run from a Debian source tree and tag bugs that are to be closed in the latest changelog as pending [libsoap-lite-perl] - transition-check: check a list of source packages for involvement in transitions for which uploads to unstable are currently blocked [libwww-perl, libyaml-syck-perl] - uscan: scan upstream sites for new releases of packages [gpgv | gpgv2, gnupg |gnupg2, liblwp-protocol-https-perl, libwww-perl, unzip, xz-utils, file] - uupdate: integrate upstream changes into a source package [patch] - what-patch: determine what patch system, if any, a source package is using [patchutils] - whodepends: check which maintainers' packages depend on a package - who-uploads: determine the most recent uploaders of a package to the Debian archive [gnupg | gnupg2, debian-keyring, debian-maintainers, wget] - wnpp-alert: list installed packages which are orphaned or up for adoption [wget | curl] - wnpp-check: check whether there is an open request for packaging or intention to package bug for a package [wget | curl] - who-permits-upload: Retrieve information about Debian Maintainer access control lists [gnupg | gnupg2, libencode-locale-perl, libwww-perl, debian-keyring] - wrap-and-sort: wrap long lines and sort items in packaging files [python3-debian] . Also included are a set of example mail filters for filtering mail from Debian mailing lists using exim, procmail, etc.
PackageMaintainer	Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
PackageName	devscripts
PackageSection	devel
PackageVersion	2.16.8ubuntu2
SHA-1	0D0F554AD0789D2A0AE3E64ABF89DD32857D371D
SHA-256	328AAF7B9D04A19D6AD98BCCC5B090F1FE5197F5F30CF7AC8A36CCA58082E4E8

Key	Value
FileSize	939972
MD5	684F8DFD77951897EDC3863F231BF504
PackageDescription	scripts to make the life of a Debian Package maintainer easier Contains the following scripts, dependencies/recommendations shown in brackets afterwards: . - annotate-output: run a command and prepend time and stream (O for stdout, E for stderr) for every line of output. - archpath: Prints arch (tla/Bazaar) package names. Also supports calculating the package names for other branches. [tla | bazaar] - bts: A command-line tool for accessing the Debian Bug Tracking System, both to send mails to control@bts.debian.org and to access the web pages and SOAP interface of the BTS. [www-browser, libauthen-sasl-perl, libnet-smtps-perl, libsoap-lite-perl, liburi-perl, libwww-perl, bsd-mailx | mailx] - build-rdeps: Searches for all packages that build-depend on a given package. [dctrl-tools, dose-extra, libdpkg-perl] - chdist: tool to easily play with several distributions. [dctrl-tools] - checkbashisms: check whether a /bin/sh script contains any common bash-specific constructs. - cowpoke: upload a Debian source package to a cowbuilder host and build it, optionally also signing and uploading the result to an incoming queue. [ssh-client] - cvs-debi, cvs-debc: wrappers around debi and debc respectively (see below) which allow them to be called from the CVS working directory. [cvs-buildpackage] - cvs-debrelease: wrapper around debrelease which allows it to be called from the CVS working directory. [cvs-buildpackage, dupload | dput, ssh-client] - cvs-debuild: A wrapper for cvs-buildpackage to use debuild as its package building program. [cvs-buildpackage, fakeroot, lintian, gnupg |gnupg2] - dcmd: run a given command replacing the name of a .changes or .dsc file with each of the files referenced therein. * - dd-list: given a list of packages, pretty-print it ordered by maintainer. * - debc: List contents of current package. Do this after a successful "debuild" to see if the package looks all right. - debchange (abbreviation dch): Modifies debian/changelog and manages version numbers for you. It will either increment the version number or add an entry for the current version, depending upon the options given to it. [libdistro-info-perl, libsoap-lite-perl]* - debcheckout: checkout the development repository of a Debian package. * - debclean: Clean a Debian source tree. Debclean will clean all Debian source trees below the current directory, and if requested, also remove all files that were generated from these source trees (that is .deb, .dsc and .changes files). It will keep the .diffs and original files, though, so that the binaries and other files can be rebuilt if necessary. [fakeroot]* - debcommit: Commits changes to cvs, darcs, svn, svk, tla, bzr, git, or hg, using new entries in debian/changelog as the commit message. Also supports tagging Debian package releases. [cvs | darcs | subversion | svk | tla | bzr | git-core | mercurial, libtimedate-perl] - debdiff: A program which examines two .deb files or two .changes files and reports on any difference found in their file lists. Useful for ensuring that no files were inadvertently lost between versions. Can also examine two .dsc files and report on the changes between source versions. For a deeper comparison one can use the diffoscope package. [wdiff, patchutils]* - debdiff-apply: Apply unified diffs of two Debian source packages, such as those generated by debdiff, to a target Debian source package. Any changes to debian/changelog are dealt with specially, to avoid the conflicts that changelog diffs typically produce when applied naively. May be used to check that old patches still apply to newer versions of those packages. [python3-debian, python3-unidiff, quilt] - debi: Installs the current package by using the setuid root debpkg script described below. It assumes that the current package has just been built (for example by debuild), and the .deb lives in the parent directory, and will effectively run dpkg -i on the .deb. The ability to install the package with a very short command is very useful when troubleshooting packages. - debpkg: A wrapper for dpkg used by debi to allow convenient testing of packages. For debpkg to work, it needs to be made setuid root, and this needs to be performed by the sysadmin -- it is not installed as setuid root by default. (Note that being able to run a setuid root debpkg is effectively the same as having root access to the system, so this should be done with caution.) Having debpkg as a wrapper for dpkg can be a Good Thing (TM), as it decreases the potential for damage by accidental wrong use of commands in superuser mode (e.g., an inadvertent rm -rf * in the wrong directory is disastrous as many can attest to). - debrelease: A wrapper around dupload or dput which figures out which version to upload, and then calls dupload or dput to actually perform the upload. [dupload | dput, ssh-client] - debrepro: A script that tests reproducibility of Debian packages. It will build a given source directory twice, with a set of variation between the first and second build, and compare the binary packages produced. If diffoscope is installed, it is used to compare non-matching binaries. If disorderfs is installed, it is used during the build to inject non-determinism in filesystem listing operations. [faketime, diffoscope, disorderfs] - debrsign: This transfers a .changes/.dsc pair to a remote machine for signing, and runs debsign on the remote machine over an SSH connection. [gnupg | gnupg2, debian-keyring, ssh-client] - debsign: Use GNU Privacy Guard to sign the changes (and possibly dsc) files created by running dpkg-buildpackage with no-sign options. Useful if you are building a package on a remote machine and wish to sign it on a local one. This script is capable of automatically downloading the .changes and .dsc files from a remote machine. [gnupg |gnupg2, debian-keyring, ssh-client]* - debsnap: grab packages from https://snapshot.debian.org [libwww-perl, libjson-perl] - debuild: A wrapper for building a package (i.e., dpkg-buildpackage) to avoid problems with insufficient permissions and wrong paths etc. Debuild will set up the proper environment for building a package. Debuild will use the fakeroot program to build the package by default, but can be instructed to use any other gain-root command, or can even be installed setuid root. Debuild can also be used to run various of the debian/rules operations with the same root-gaining procedure. Debuild will also run lintian to check that the package does not have any major policy violations. [fakeroot, lintian, gnupg | gnupg2]* - deb-reversion: increases a binary package version number and repacks the package, useful for porters and the like. - deb-why-removed: shows the reason a package was removed from the archive. [libdpkg-perl] - dep3changelog: generate a changelog entry from a DEP3-style patch header. - desktop2menu: given a freedesktop.org desktop file, generate a skeleton for a menu file. [libfile-desktopentry-perl] - dget: Downloads Debian source and binary packages. Point at a .changes or .dsc to download all references files. Specify a package name to download it from the configured apt repository. [wget | curl] - diff2patches: extracts patches from a .diff.gz file placing them under debian/ or, if present, debian/patches. [patchutils] - dpkg-depcheck, dpkg-genbuilddeps: Runs a specified command (such as debian/rules build) or dpkg-buildpackage, respectively, to determine the packages used during the build process. This information can be helpful when trying to determine the packages needed in the Build-Depends etc. lines in the debian/control file. [build-essential, strace] - dscextract: extract a single file from a Debian source package. [patchutils] - dscverify: check the signature and MD5 sums of a dsc file against the most current Debian keyring on your system. [gnupg | gnupg2, debian-keyring] - edit-patch: add/edit a patch for a source package and commit the changes. [quilt | dpatch | cdbs] - getbuildlog: download package build logs from Debian auto-builders. [wget] - git-deborig: try to produce Debian orig.tar using git-archive(1). [libdpkg-perl, libgit-wrapper-perl, liblist-compare-perl, libstring-shellquote-perl, libtry-tiny-perl] - grep-excuses: grep britney's excuses to find out what is happening to your packages. [libdbd-pg-perl, libterm-size-perl, libyaml-syck-perl, wget, w3m] - hardening-check: report the hardening characteristics of a set of binaries. - list-unreleased: searches for packages marked UNRELEASED in their changelog. - ltnu (Long Time No Upload): List all uploads of packages by the given uploader or maintainer and display them ordered by the last upload of that package, oldest uploads first. - manpage-alert: locate binaries without corresponding manpages. [man-db] - mass-bug: mass-file bug reports. [bsd-mailx | mailx] - mergechanges: merge .changes files from the same release but built on different architectures. - mk-build-deps: Given a package name and/or control file, generate a binary package which may be installed to satisfy the build-dependencies of the given package. [equivs] - mk-origtargz: Rename upstream tarball, optionally changing the compression and removing unwanted files. [libfile-which-perl, unzip, xz-utils, file] - namecheck: Check project names are not already taken. - nmudiff: prepare a diff of this version (presumably an NMU against the previously released version (as per the changelog) and submit the diff to the BTS. [patchutils, mutt] - origtargz: fetch the orig tarball of a Debian package from various sources, and unpack it. - plotchangelog: display information from a changelog graphically using gnuplot. [libtimedate-perl, gnuplot] - pts-subscribe: subscribe to the PTS (Package Tracking System) for a limited period of time. [bsd-mailx | mailx, at] - rc-alert: list installed packages which have release-critical bugs. [wget | curl] - rmadison: remotely query the Debian archive database about packages. [liburi-perl, wget | curl] - sadt: run DEP-8 tests. [python3-debian] - salsa: manipulates salsa.debian.org repositories and users [libgitlab-api-v4-perl] - suspicious-source: output a list of files which are not common source files. [python3-magic] - svnpath: Prints the path to the Subversion repository of a Subversion checkout. Also supports calculating the paths for branches and tags in a repository independent fashion. Used by debcommit to generate svn tags. [subversion] - tagpending: runs from a Debian source tree and tags bugs that are to be closed in the latest changelog as pending. [libsoap-lite-perl] - transition-check: Check a list of source packages for involvement in transitions for which uploads to unstable are currently blocked. [libwww-perl, libyaml-syck-perl] - uscan: Automatically scan for and download upstream updates. Uscan can also call a program such as uupdate to attempt to update the Debianised version based on the new update. Whilst uscan could be used to release the updated version automatically, it is probably better not to without testing it first. Uscan can also verify detached OpenPGP signatures if upstream's signing key is known. [file, gpgv | gpgv2, gnupg | gnupg2, libfile-which-perl, liblwp-protocol-https-perl, libmoo-perl, libwww-perl, unzip, xz-utils]* - uupdate: Update the package with an archive or patches from an upstream author. This will be of help if you have to update your package. It will try to apply the latest diffs to your package and tell you how successful it was. [patch] - what-patch: determine what patch system, if any, a source package is using. [patchutils] - whodepends: check which maintainers' packages depend on a package. - who-permits-upload: Retrieve information about Debian Maintainer access control lists. [gnupg | gnupg2, libencode-locale-perl, libwww-perl, debian-keyring] - who-uploads: determine the most recent uploaders of a package to the Debian archive. [gnupg | gnupg2, debian-keyring, debian-maintainers, wget] - wnpp-alert: list installed packages which are orphaned or up for adoption. [wget | curl] - wnpp-check: check whether there is an open request for packaging or intention to package bug for a package. [wget | curl] - wrap-and-sort: wrap long lines and sort items in packaging files. [python3-debian] - /usr/share/doc/devscripts/examples: This directory contains examples of procmail and exim scripts for sorting mail arriving to Debian mailing lists.
PackageMaintainer	Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
PackageName	devscripts
PackageSection	devel
PackageVersion	2.20.2ubuntu2
SHA-1	0E150ED6991D5BFCB19C9DBFFCCC67D97376F177
SHA-256	7DCF8ECC83AC3EE102B82C488EBE82D1F07D9910685B1A7A232EC8BD9597A91A

Key	Value
FileSize	1045532
MD5	3736200E3453702C777CF262D5EE09FE
PackageDescription	scripts to make the life of a Debian Package maintainer easier Contains the following scripts, dependencies/recommendations shown in brackets afterwards: . - annotate-output: run a command and prepend time and stream (O for stdout, E for stderr) for every line of output. - archpath: Prints arch (tla/Bazaar) package names. Also supports calculating the package names for other branches. [tla | bazaar] - bts: A command-line tool for accessing the Debian Bug Tracking System, both to send mails to control@bts.debian.org and to access the web pages and SOAP interface of the BTS. [www-browser, libauthen-sasl-perl, libnet-smtps-perl, libsoap-lite-perl, liburi-perl, libwww-perl, bsd-mailx | mailx] - build-rdeps: Searches for all packages that build-depend on a given package. [dctrl-tools, dose-extra, libdpkg-perl] - chdist: tool to easily play with several distributions. [dctrl-tools] - checkbashisms: check whether a /bin/sh script contains any common bash-specific constructs. - cowpoke: upload a Debian source package to a cowbuilder host and build it, optionally also signing and uploading the result to an incoming queue. [ssh-client] - cvs-debi, cvs-debc: wrappers around debi and debc respectively (see below) which allow them to be called from the CVS working directory. [cvs-buildpackage] - cvs-debrelease: wrapper around debrelease which allows it to be called from the CVS working directory. [cvs-buildpackage, dupload | dput, ssh-client] - cvs-debuild: A wrapper for cvs-buildpackage to use debuild as its package building program. [cvs-buildpackage, fakeroot, lintian, gnupg |gnupg2] - dcmd: run a given command replacing the name of a .changes or .dsc file with each of the files referenced therein. * - dcontrol: remotely query package and source control files for all Debian distributions. [liburl-perl, libwww-perl] - dd-list: given a list of packages, pretty-print it ordered by maintainer. * - debc: List contents of current package. Do this after a successful "debuild" to see if the package looks all right. - debchange (abbreviation dch): Modifies debian/changelog and manages version numbers for you. It will either increment the version number or add an entry for the current version, depending upon the options given to it. [libdistro-info-perl, libsoap-lite-perl]* - debcheckout: checkout the development repository of a Debian package. * - debclean: Clean a Debian source tree. Debclean will clean all Debian source trees below the current directory, and if requested, also remove all files that were generated from these source trees (that is .deb, .dsc and .changes files). It will keep the .diffs and original files, though, so that the binaries and other files can be rebuilt if necessary. [fakeroot]* - debcommit: Commits changes to cvs, darcs, svn, svk, tla, bzr, git, or hg, using new entries in debian/changelog as the commit message. Also supports tagging Debian package releases. [cvs | darcs | subversion | svk | tla | bzr | git-core | mercurial, libtimedate-perl] - debdiff: A program which examines two .deb files or two .changes files and reports on any difference found in their file lists. Useful for ensuring that no files were inadvertently lost between versions. Can also examine two .dsc files and report on the changes between source versions. For a deeper comparison one can use the diffoscope package. [wdiff, patchutils]* - debdiff-apply: Apply unified diffs of two Debian source packages, such as those generated by debdiff, to a target Debian source package. Any changes to debian/changelog are dealt with specially, to avoid the conflicts that changelog diffs typically produce when applied naively. May be used to check that old patches still apply to newer versions of those packages. [python3-debian, python3-unidiff, quilt] - debi: Installs the current package by using the setuid root debpkg script described below. It assumes that the current package has just been built (for example by debuild), and the .deb lives in the parent directory, and will effectively run dpkg -i on the .deb. The ability to install the package with a very short command is very useful when troubleshooting packages. - debpkg: A wrapper for dpkg used by debi to allow convenient testing of packages. For debpkg to work, it needs to be made setuid root, and this needs to be performed by the sysadmin -- it is not installed as setuid root by default. (Note that being able to run a setuid root debpkg is effectively the same as having root access to the system, so this should be done with caution.) Having debpkg as a wrapper for dpkg can be a Good Thing (TM), as it decreases the potential for damage by accidental wrong use of commands in superuser mode (e.g., an inadvertent rm -rf * in the wrong directory is disastrous as many can attest to). - debrelease: A wrapper around dupload or dput which figures out which version to upload, and then calls dupload or dput to actually perform the upload. [dupload | dput, ssh-client] - debrepro: A script that tests reproducibility of Debian packages. It will build a given source directory twice, with a set of variation between the first and second build, and compare the binary packages produced. If diffoscope is installed, it is used to compare non-matching binaries. If disorderfs is installed, it is used during the build to inject non-determinism in filesystem listing operations. [faketime, diffoscope, disorderfs] - debrsign: This transfers a .changes/.dsc pair to a remote machine for signing, and runs debsign on the remote machine over an SSH connection. [gnupg | gnupg2, debian-keyring, ssh-client] - debsign: Use GNU Privacy Guard to sign the changes (and possibly dsc) files created by running dpkg-buildpackage with no-sign options. Useful if you are building a package on a remote machine and wish to sign it on a local one. This script is capable of automatically downloading the .changes and .dsc files from a remote machine. [gnupg |gnupg2, debian-keyring, ssh-client]* - debsnap: grab packages from https://snapshot.debian.org [libwww-perl, libjson-perl] - debuild: A wrapper for building a package (i.e., dpkg-buildpackage) to avoid problems with insufficient permissions and wrong paths etc. Debuild will set up the proper environment for building a package. Debuild will use the fakeroot program to build the package by default, but can be instructed to use any other gain-root command, or can even be installed setuid root. Debuild can also be used to run various of the debian/rules operations with the same root-gaining procedure. Debuild will also run lintian to check that the package does not have any major policy violations. [fakeroot, lintian, gnupg | gnupg2]* - deb-reversion: increases a binary package version number and repacks the package, useful for porters and the like. - dep3changelog: generate a changelog entry from a DEP3-style patch header. - desktop2menu: given a freedesktop.org desktop file, generate a skeleton for a menu file. [libfile-desktopentry-perl] - dget: Downloads Debian source and binary packages. Point at a .changes or .dsc to download all references files. Specify a package name to download it from the configured apt repository. [wget | curl] - diff2patches: extracts patches from a .diff.gz file placing them under debian/ or, if present, debian/patches. [patchutils] - dpkg-depcheck, dpkg-genbuilddeps: Runs a specified command (such as debian/rules build) or dpkg-buildpackage, respectively, to determine the packages used during the build process. This information can be helpful when trying to determine the packages needed in the Build-Depends etc. lines in the debian/control file. [build-essential, strace] - dscextract: extract a single file from a Debian source package. [patchutils] - dscverify: check the signature and MD5 sums of a dsc file against the most current Debian keyring on your system. [gnupg | gnupg2, debian-keyring] - edit-patch: add/edit a patch for a source package and commit the changes. [quilt | dpatch | cdbs] - getbuildlog: download package build logs from Debian auto-builders. [wget] - git-deborig: try to produce Debian orig.tar using git-archive(1). [libdpkg-perl, libgit-wrapper-perl, liblist-compare-perl, libstring-shellquote-perl, libtry-tiny-perl] - grep-excuses: grep britney's excuses to find out what is happening to your packages. [libdbd-pg-perl, libterm-size-perl, libyaml-syck-perl, wget, w3m] - hardening-check: report the hardening characteristics of a set of binaries. - list-unreleased: searches for packages marked UNRELEASED in their changelog. - ltnu (Long Time No Upload): List all uploads of packages by the given uploader or maintainer and display them ordered by the last upload of that package, oldest uploads first. - manpage-alert: locate binaries without corresponding manpages. [man-db] - mass-bug: mass-file bug reports. [bsd-mailx | mailx] - mergechanges: merge .changes files from the same release but built on different architectures. - mk-build-deps: Given a package name and/or control file, generate a binary package which may be installed to satisfy the build-dependencies of the given package. [equivs] - mk-origtargz: Rename upstream tarball, optionally changing the compression and removing unwanted files. [libfile-which-perl, unzip, xz-utils, file] - namecheck: Check project names are not already taken. - nmudiff: prepare a diff of this version (presumably an NMU against the previously released version (as per the changelog) and submit the diff to the BTS. [patchutils, mutt] - origtargz: fetch the orig tarball of a Debian package from various sources, and unpack it. - plotchangelog: display information from a changelog graphically using gnuplot. [libtimedate-perl, gnuplot] - pts-subscribe: subscribe to the PTS (Package Tracking System) for a limited period of time. [bsd-mailx | mailx, at] - rc-alert: list installed packages which have release-critical bugs. [wget | curl] - rmadison: remotely query the Debian archive database about packages. [liburi-perl, wget | curl] - sadt: run DEP-8 tests. [python3-debian] - salsa: manipulates salsa.debian.org repositories and users [libgitlab-api-v4-perl] - suspicious-source: output a list of files which are not common source files. [python3-magic] - svnpath: Prints the path to the Subversion repository of a Subversion checkout. Also supports calculating the paths for branches and tags in a repository independent fashion. Used by debcommit to generate svn tags. [subversion] - tagpending: runs from a Debian source tree and tags bugs that are to be closed in the latest changelog as pending. [libsoap-lite-perl] - transition-check: Check a list of source packages for involvement in transitions for which uploads to unstable are currently blocked. [libwww-perl, libyaml-syck-perl] - uscan: Automatically scan for and download upstream updates. Uscan can also call a program such as uupdate to attempt to update the Debianised version based on the new update. Whilst uscan could be used to release the updated version automatically, it is probably better not to without testing it first. Uscan can also verify detached OpenPGP signatures if upstream's signing key is known. [file, gpgv | gpgv2, gnupg | gnupg2, libfile-which-perl, liblwp-protocol-https-perl, libmoo-perl, libwww-perl, unzip, xz-utils]* - uupdate: Update the package with an archive or patches from an upstream author. This will be of help if you have to update your package. It will try to apply the latest diffs to your package and tell you how successful it was. [patch] - what-patch: determine what patch system, if any, a source package is using. [patchutils] - whodepends: check which maintainers' packages depend on a package. - who-permits-upload: Retrieve information about Debian Maintainer access control lists. [gnupg | gnupg2, libencode-locale-perl, libwww-perl, debian-keyring] - who-uploads: determine the most recent uploaders of a package to the Debian archive. [gnupg | gnupg2, debian-keyring, debian-maintainers, wget] - wnpp-alert: list installed packages which are orphaned or up for adoption. [wget | curl] - wnpp-check: check whether there is an open request for packaging or intention to package bug for a package. [wget | curl] - wrap-and-sort: wrap long lines and sort items in packaging files. [python3-debian] - /usr/share/doc/devscripts/examples: This directory contains examples of procmail and exim scripts for sorting mail arriving to Debian mailing lists.
PackageMaintainer	Devscripts Maintainers <devscripts@packages.debian.org>
PackageName	devscripts
PackageSection	devel
PackageVersion	2.19.5+deb10u1
SHA-1	0F73E58BA4E459C6A954ED6263F2E949EC0357C3
SHA-256	26EFAB098E17AA83C14AE8BF8E7DD4253B1A872AA2311D19706113E555450E0D

Key	Value
FileSize	846612
MD5	63A2378AD09930AA02E21FBCF88B6AA0
PackageDescription	scripts to make the life of a Debian Package maintainer easier Contains the following scripts, dependencies/recommendations shown in brackets afterwards: . - annotate-output: run a command and prepend time and stream (O for stdout, E for stderr) for every line of output - archpath: print tla/Bazaar package names [tla | bazaar] - bts: a command-line tool for manipulating the BTS [www-browser, libauthen-sasl-perl, libnet-smtps-perl, libsoap-lite-perl, liburi-perl, libwww-perl, bsd-mailx | mailx] - build-rdeps: search for all packages that build-depend on a given package [dctrl-tools, dose-extra] - chdist: tool to easily play with several distributions [dctrl-tools] - checkbashisms: check whether a /bin/sh script contains any common bash-specific constructs - cowpoke: upload a Debian source package to a cowbuilder host and build it, optionally also signing and uploading the result to an incoming queue [ssh-client] - cvs-debi, cvs-debc: wrappers around debi and debc respectively (see below) which allow them to be called from the CVS working directory [cvs-buildpackage] - cvs-debrelease: wrapper around debrelease which allows it to be called from the CVS working directory [cvs-buildpackage, dupload | dput, ssh-client] - cvs-debuild: wrapper for cvs-buildpackage to use debuild as its package building program [cvs-buildpackage, fakeroot, lintian, gnupg | gnupg2] - dcmd: run a given command replacing the name of a .changes or .dsc file with each of the files referenced therein - dcontrol: remotely query package and source control files for all Debian distributions [liburl-perl, libwww-perl] - dd-list: given a list of packages, pretty-print it ordered by maintainer - debc: display the contents of just-built .debs - debchange/dch: automagically add entries to debian/changelog files [libdistro-info-perl, libsoap-lite-perl] - debcheckout: checkout the development repository of a Debian package - debclean: clean a Debian source tree [fakeroot] - debcommit: commit changes to cvs, darcs, svn, svk, tla, bzr, git, or hg, basing commit message on changelog [cvs | darcs | subversion | svk | tla | bzr | git-core | mercurial, libtimedate-perl] - debdiff: compare two versions of a Debian package to check for added and removed files. Use the diffoscope package for deep comparisons. [wdiff, patchutils] - debdiff-apply: apply unified diffs of two Debian source packages, such as generated by debdiff, to a target source package [python3-unidiff, quilt] - debi: install a just-built package - debpkg: dpkg wrapper to be able to manage/test packages without su - debrepro: reproducibility tester for Debian packages [faketime, diffoscope, disorderfs] - debrelease: wrapper around dupload or dput [dupload | dput, ssh-client] - debsign, debrsign: sign a .changes/.dsc pair without needing any of the rest of the package to be present; can sign the pair remotely or fetch the pair from a remote machine for signing [gnupg | gnupg2, debian-keyring, ssh-client] - debsnap: grab packages from http://snapshot.debian.org [libwww-perl] - debuild: wrapper to build a package without having to su or worry about how to invoke dpkg to build using fakeroot. Also deals with common environment problems, umask etc. [fakeroot, lintian, gnupg | gnupg2] - deb-reversion: increase a binary package version number and repacks the package, useful for porters and the like - dep3changelog: generate a changelog entry from a DEP3-style patch header - desktop2menu: given a freedesktop.org desktop file, generate a skeleton for a menu file [libfile-desktopentry-perl] - dget: download Debian source and binary packages [wget | curl] - diff2patches: extract patches from a .diff.gz file placing them under debian/ or, if present, debian/patches [patchutils] - dpkg-depcheck, dpkg-genbuilddeps: determine the packages used during the build of a Debian package; useful for determining the Build-Depends control field needed [build-essential, strace] - dscextract: extract a single file from a Debian source package [patchutils] - dscverify: verify the integrity of a Debian package from the .changes or .dsc files [gnupg | gnupg2, debian-keyring] - edit-patch: add/edit a patch for a source package and commit the changes [quilt | dpatch | cdbs] - getbuildlog: download package build logs from Debian auto-builders [wget] - git-deborig: try to produce Debian orig.tar using git-archive(1) [libdpkg-perl, libgit-wrapper-perl, liblist-compare-perl] - grep-excuses: grep britney's excuses for your packages [libterm-size-perl, libyaml-syck-perl, wget, w3m] - list-unreleased: search for unreleased packages - manpage-alert: locate binaries without corresponding manpages [man-db] - mass-bug: mass-file bug reports [bsd-mailx | mailx] - mergechanges: merge .changes files from the same release but built on different architectures - mk-build-deps: given a package name and/or control file, generate a binary package which may be installed to satisfy the build-dependencies of the given package [equivs] - mk-origtargz: rename upstream tarball, optionally changing the compression and removing unwanted files [unzip, xz-utils, file] - namecheck: check project names are not already taken - nmudiff: mail a diff of the current package against the previous version to the BTS to assist in tracking NMUs [patchutils, mutt] - origtargz: fetch the orig tarball of a Debian package from various sources, and unpack it - plotchangelog: view a nice plot of the data in a changelog file [libtimedate-perl, gnuplot] - pts-subscribe: subscribe to the PTS for a limited period of time [bsd-mailx | mailx, at] - rc-alert: list installed packages which have release-critical bugs [wget | curl] - rmadison: remotely query the Debian archive database about packages [liburi-perl, wget | curl] - sadt: run DEP-8 tests [python3-debian] - suspicious-source: output a list of files which are not common source files [python3-magic] - svnpath: print Subversion repository paths [subversion] - tagpending: run from a Debian source tree and tag bugs that are to be closed in the latest changelog as pending [libsoap-lite-perl] - transition-check: check a list of source packages for involvement in transitions for which uploads to unstable are currently blocked [libwww-perl, libyaml-syck-perl] - uscan: scan upstream sites for new releases of packages [gpgv | gpgv2, gnupg |gnupg2, liblwp-protocol-https-perl, libwww-perl, unzip, xz-utils, file] - uupdate: integrate upstream changes into a source package [patch] - what-patch: determine what patch system, if any, a source package is using [patchutils] - whodepends: check which maintainers' packages depend on a package - who-uploads: determine the most recent uploaders of a package to the Debian archive [gnupg | gnupg2, debian-keyring, debian-maintainers, wget] - wnpp-alert: list installed packages which are orphaned or up for adoption [wget | curl] - wnpp-check: check whether there is an open request for packaging or intention to package bug for a package [wget | curl] - who-permits-upload: Retrieve information about Debian Maintainer access control lists [gnupg | gnupg2, libencode-locale-perl, libwww-perl, debian-keyring] - wrap-and-sort: wrap long lines and sort items in packaging files [python3-debian] . Also included are a set of example mail filters for filtering mail from Debian mailing lists using exim, procmail, etc.
PackageMaintainer	Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
PackageName	devscripts
PackageSection	devel
PackageVersion	2.17.9ubuntu0.1
SHA-1	11B98671BD101C458DE84EFE351CC067E05F78E4
SHA-256	53D32265848DBBCCDE0C80880013695B4A1BB41EDC5273D73A85BBD49DD128EB

Key	Value
FileSize	938162
MD5	2815A51E91831DF235051B9817F11119
PackageDescription	scripts to make the life of a Debian Package maintainer easier Contains the following scripts, dependencies/recommendations shown in brackets afterwards: . - annotate-output: run a command and prepend time and stream (O for stdout, E for stderr) for every line of output - archpath: print tla/Bazaar package names [tla | bazaar] - bts: a command-line tool for manipulating the BTS [www-browser, libauthen-sasl-perl, libnet-smtps-perl, libsoap-lite-perl, liburi-perl, libwww-perl, bsd-mailx | mailx] - build-rdeps: search for all packages that build-depend on a given package [dctrl-tools, dose-extra] - chdist: tool to easily play with several distributions [dctrl-tools] - checkbashisms: check whether a /bin/sh script contains any common bash-specific constructs - cowpoke: upload a Debian source package to a cowbuilder host and build it, optionally also signing and uploading the result to an incoming queue [ssh-client] - cvs-debi, cvs-debc: wrappers around debi and debc respectively (see below) which allow them to be called from the CVS working directory [cvs-buildpackage] - cvs-debrelease: wrapper around debrelease which allows it to be called from the CVS working directory [cvs-buildpackage, dupload | dput, ssh-client] - cvs-debuild: wrapper for cvs-buildpackage to use debuild as its package building program [cvs-buildpackage, fakeroot, lintian, gnupg | gnupg2] - dcmd: run a given command replacing the name of a .changes or .dsc file with each of the files referenced therein - dcontrol: remotely query package and source control files for all Debian distributions [liburl-perl, libwww-perl] - dd-list: given a list of packages, pretty-print it ordered by maintainer - debc: display the contents of just-built .debs - debchange/dch: automagically add entries to debian/changelog files [libdistro-info-perl, libsoap-lite-perl] - debcheckout: checkout the development repository of a Debian package - debclean: clean a Debian source tree [fakeroot] - debcommit: commit changes to cvs, darcs, svn, svk, tla, bzr, git, or hg, basing commit message on changelog [cvs | darcs | subversion | svk | tla | bzr | git-core | mercurial, libtimedate-perl] - debdiff: compare two versions of a Debian package to check for added and removed files. Use the diffoscope package for deep comparisons. [wdiff, patchutils] - debi: install a just-built package - debpkg: dpkg wrapper to be able to manage/test packages without su - debrepro: reproducibility tester for Debian packages [faketime, diffoscope, disorderfs] - debrelease: wrapper around dupload or dput [dupload | dput, ssh-client] - debsign, debrsign: sign a .changes/.dsc pair without needing any of the rest of the package to be present; can sign the pair remotely or fetch the pair from a remote machine for signing [gnupg | gnupg2, debian-keyring, ssh-client] - debsnap: grab packages from http://snapshot.debian.org [libwww-perl] - debuild: wrapper to build a package without having to su or worry about how to invoke dpkg to build using fakeroot. Also deals with common environment problems, umask etc. [fakeroot, lintian, gnupg | gnupg2] - deb-reversion: increase a binary package version number and repacks the package, useful for porters and the like - dep3changelog: generate a changelog entry from a DEP3-style patch header - desktop2menu: given a freedesktop.org desktop file, generate a skeleton for a menu file [libfile-desktopentry-perl] - dget: download Debian source and binary packages [wget | curl] - diff2patches: extract patches from a .diff.gz file placing them under debian/ or, if present, debian/patches [patchutils] - dpkg-depcheck, dpkg-genbuilddeps: determine the packages used during the build of a Debian package; useful for determining the Build-Depends control field needed [build-essential, strace] - dscextract: extract a single file from a Debian source package [patchutils] - dscverify: verify the integrity of a Debian package from the .changes or .dsc files [gnupg | gnupg2, debian-keyring] - edit-patch: add/edit a patch for a source package and commit the changes [quilt | dpatch | cdbs] - getbuildlog: download package build logs from Debian auto-builders [wget] - git-deborig: try to produce Debian orig.tar using git-archive(1) [libdpkg-perl, libgit-wrapper-perl, liblist-compare-perl] - grep-excuses: grep the update_excuses.html file for your packages [libterm-size-perl, wget, w3m] - list-unreleased: search for unreleased packages - manpage-alert: locate binaries without corresponding manpages [man-db] - mass-bug: mass-file bug reports [bsd-mailx | mailx] - mergechanges: merge .changes files from the same release but built on different architectures - mk-build-deps: given a package name and/or control file, generate a binary package which may be installed to satisfy the build-dependencies of the given package [equivs] - mk-origtargz: rename upstream tarball, optionally changing the compression and removing unwanted files [unzip, xz-utils, file] - namecheck: check project names are not already taken - nmudiff: mail a diff of the current package against the previous version to the BTS to assist in tracking NMUs [patchutils, mutt] - origtargz: fetch the orig tarball of a Debian package from various sources, and unpack it - plotchangelog: view a nice plot of the data in a changelog file [libtimedate-perl, gnuplot] - pts-subscribe: subscribe to the PTS for a limited period of time [bsd-mailx | mailx, at] - rc-alert: list installed packages which have release-critical bugs [wget | curl] - rmadison: remotely query the Debian archive database about packages [liburi-perl, wget | curl] - sadt: run DEP-8 tests [python3-debian] - suspicious-source: output a list of files which are not common source files [python3-magic] - svnpath: print Subversion repository paths [subversion] - tagpending: run from a Debian source tree and tag bugs that are to be closed in the latest changelog as pending [libsoap-lite-perl] - transition-check: check a list of source packages for involvement in transitions for which uploads to unstable are currently blocked [libwww-perl, libyaml-syck-perl] - uscan: scan upstream sites for new releases of packages [gpgv | gpgv2, gnupg |gnupg2, liblwp-protocol-https-perl, libwww-perl, unzip, xz-utils, file] - uupdate: integrate upstream changes into a source package [patch] - what-patch: determine what patch system, if any, a source package is using [patchutils] - whodepends: check which maintainers' packages depend on a package - who-uploads: determine the most recent uploaders of a package to the Debian archive [gnupg | gnupg2, debian-keyring, debian-maintainers, wget] - wnpp-alert: list installed packages which are orphaned or up for adoption [wget | curl] - wnpp-check: check whether there is an open request for packaging or intention to package bug for a package [wget | curl] - who-permits-upload: Retrieve information about Debian Maintainer access control lists [gnupg | gnupg2, libencode-locale-perl, libwww-perl, debian-keyring] - wrap-and-sort: wrap long lines and sort items in packaging files [python3-debian] . Also included are a set of example mail filters for filtering mail from Debian mailing lists using exim, procmail, etc.
PackageMaintainer	Devscripts Maintainers <devscripts@packages.debian.org>
PackageName	devscripts
PackageSection	devel
PackageVersion	2.17.6+deb9u2
SHA-1	1325CE699511D4BDDA79915E60DBC79AB16B8825
SHA-256	CC134544B00966392ACD3A09F653AA4CF18AAEB9B5541A5BEF6003B6EFF9FAFC

Key	Value
MD5	C80BC6143E6D1CECACD29776F5B34D7D
PackageArch	aarch64
PackageDescription	This package contains the devscripts checkbashisms script.
PackageMaintainer	Fedora Project
PackageName	devscripts-checkbashisms
PackageRelease	1.fc32
PackageVersion	2.20.2
SHA-1	13EFBB17F7E83186A01CB80996EB1CF67DAC44BF
SHA-256	45BA9F35F0B43A60F9DB8BE8A16F8664336B96983B44A44E311CA7BF1E28D26C

Key	Value
FileSize	938454
MD5	07E413CE061F794447318E2D868D0101
PackageDescription	scripts to make the life of a Debian Package maintainer easier Contains the following scripts, dependencies/recommendations shown in brackets afterwards: . - annotate-output: run a command and prepend time and stream (O for stdout, E for stderr) for every line of output - archpath: print tla/Bazaar package names [tla | bazaar] - bts: a command-line tool for manipulating the BTS [www-browser, libauthen-sasl-perl, libnet-smtps-perl, libsoap-lite-perl, liburi-perl, libwww-perl, bsd-mailx | mailx] - build-rdeps: search for all packages that build-depend on a given package [dctrl-tools, dose-extra] - chdist: tool to easily play with several distributions [dctrl-tools] - checkbashisms: check whether a /bin/sh script contains any common bash-specific constructs - cowpoke: upload a Debian source package to a cowbuilder host and build it, optionally also signing and uploading the result to an incoming queue [ssh-client] - cvs-debi, cvs-debc: wrappers around debi and debc respectively (see below) which allow them to be called from the CVS working directory [cvs-buildpackage] - cvs-debrelease: wrapper around debrelease which allows it to be called from the CVS working directory [cvs-buildpackage, dupload | dput, ssh-client] - cvs-debuild: wrapper for cvs-buildpackage to use debuild as its package building program [cvs-buildpackage, fakeroot, lintian, gnupg | gnupg2] - dcmd: run a given command replacing the name of a .changes or .dsc file with each of the files referenced therein - dcontrol: remotely query package and source control files for all Debian distributions [liburl-perl, libwww-perl] - dd-list: given a list of packages, pretty-print it ordered by maintainer - debc: display the contents of just-built .debs - debchange/dch: automagically add entries to debian/changelog files [libdistro-info-perl, libsoap-lite-perl] - debcheckout: checkout the development repository of a Debian package - debclean: clean a Debian source tree [fakeroot] - debcommit: commit changes to cvs, darcs, svn, svk, tla, bzr, git, or hg, basing commit message on changelog [cvs | darcs | subversion | svk | tla | bzr | git-core | mercurial, libtimedate-perl] - debdiff: compare two versions of a Debian package to check for added and removed files. Use the diffoscope package for deep comparisons. [wdiff, patchutils] - debi: install a just-built package - debpkg: dpkg wrapper to be able to manage/test packages without su - debrepro: reproducibility tester for Debian packages [faketime, diffoscope, disorderfs] - debrelease: wrapper around dupload or dput [dupload | dput, ssh-client] - debsign, debrsign: sign a .changes/.dsc pair without needing any of the rest of the package to be present; can sign the pair remotely or fetch the pair from a remote machine for signing [gnupg | gnupg2, debian-keyring, ssh-client] - debsnap: grab packages from http://snapshot.debian.org [libwww-perl] - debuild: wrapper to build a package without having to su or worry about how to invoke dpkg to build using fakeroot. Also deals with common environment problems, umask etc. [fakeroot, lintian, gnupg | gnupg2] - deb-reversion: increase a binary package version number and repacks the package, useful for porters and the like - dep3changelog: generate a changelog entry from a DEP3-style patch header - desktop2menu: given a freedesktop.org desktop file, generate a skeleton for a menu file [libfile-desktopentry-perl] - dget: download Debian source and binary packages [wget | curl] - diff2patches: extract patches from a .diff.gz file placing them under debian/ or, if present, debian/patches [patchutils] - dpkg-depcheck, dpkg-genbuilddeps: determine the packages used during the build of a Debian package; useful for determining the Build-Depends control field needed [build-essential, strace] - dscextract: extract a single file from a Debian source package [patchutils] - dscverify: verify the integrity of a Debian package from the .changes or .dsc files [gnupg | gnupg2, debian-keyring] - edit-patch: add/edit a patch for a source package and commit the changes [quilt | dpatch | cdbs] - getbuildlog: download package build logs from Debian auto-builders [wget] - git-deborig: try to produce Debian orig.tar using git-archive(1) [libdpkg-perl, libgit-wrapper-perl, liblist-compare-perl] - grep-excuses: grep the update_excuses.html file for your packages [libterm-size-perl, wget, w3m] - list-unreleased: search for unreleased packages - manpage-alert: locate binaries without corresponding manpages [man-db] - mass-bug: mass-file bug reports [bsd-mailx | mailx] - mergechanges: merge .changes files from the same release but built on different architectures - mk-build-deps: given a package name and/or control file, generate a binary package which may be installed to satisfy the build-dependencies of the given package [equivs] - mk-origtargz: rename upstream tarball, optionally changing the compression and removing unwanted files [unzip, xz-utils, file] - namecheck: check project names are not already taken - nmudiff: mail a diff of the current package against the previous version to the BTS to assist in tracking NMUs [patchutils, mutt] - origtargz: fetch the orig tarball of a Debian package from various sources, and unpack it - plotchangelog: view a nice plot of the data in a changelog file [libtimedate-perl, gnuplot] - pts-subscribe: subscribe to the PTS for a limited period of time [bsd-mailx | mailx, at] - rc-alert: list installed packages which have release-critical bugs [wget | curl] - rmadison: remotely query the Debian archive database about packages [liburi-perl, wget | curl] - sadt: run DEP-8 tests [python3-debian] - suspicious-source: output a list of files which are not common source files [python3-magic] - svnpath: print Subversion repository paths [subversion] - tagpending: run from a Debian source tree and tag bugs that are to be closed in the latest changelog as pending [libsoap-lite-perl] - transition-check: check a list of source packages for involvement in transitions for which uploads to unstable are currently blocked [libwww-perl, libyaml-syck-perl] - uscan: scan upstream sites for new releases of packages [gpgv | gpgv2, gnupg |gnupg2, liblwp-protocol-https-perl, libwww-perl, unzip, xz-utils, file] - uupdate: integrate upstream changes into a source package [patch] - what-patch: determine what patch system, if any, a source package is using [patchutils] - whodepends: check which maintainers' packages depend on a package - who-uploads: determine the most recent uploaders of a package to the Debian archive [gnupg | gnupg2, debian-keyring, debian-maintainers, wget] - wnpp-alert: list installed packages which are orphaned or up for adoption [wget | curl] - wnpp-check: check whether there is an open request for packaging or intention to package bug for a package [wget | curl] - who-permits-upload: Retrieve information about Debian Maintainer access control lists [gnupg | gnupg2, libencode-locale-perl, libwww-perl, debian-keyring] - wrap-and-sort: wrap long lines and sort items in packaging files [python3-debian] . Also included are a set of example mail filters for filtering mail from Debian mailing lists using exim, procmail, etc.
PackageMaintainer	Devscripts Maintainers <devscripts@packages.debian.org>
PackageName	devscripts
PackageSection	devel
PackageVersion	2.17.6+deb9u2
SHA-1	17DA5CBFCD284F7788301013DE5C9616E2628C12
SHA-256	C119ABF88CBA61A33D4CBB87C3F444CBC0470D1C378AF3AFB558C65D470E8B83

Key	Value
FileSize	847074
MD5	4854D6781718937A449B72A5C94B35FC
PackageDescription	scripts to make the life of a Debian Package maintainer easier Contains the following scripts, dependencies/recommendations shown in brackets afterwards: . - annotate-output: run a command and prepend time and stream (O for stdout, E for stderr) for every line of output - archpath: print tla/Bazaar package names [tla | bazaar] - bts: a command-line tool for manipulating the BTS [www-browser, libauthen-sasl-perl, libnet-smtps-perl, libsoap-lite-perl, liburi-perl, libwww-perl, bsd-mailx | mailx] - build-rdeps: search for all packages that build-depend on a given package [dctrl-tools, dose-extra] - chdist: tool to easily play with several distributions [dctrl-tools] - checkbashisms: check whether a /bin/sh script contains any common bash-specific constructs - cowpoke: upload a Debian source package to a cowbuilder host and build it, optionally also signing and uploading the result to an incoming queue [ssh-client] - cvs-debi, cvs-debc: wrappers around debi and debc respectively (see below) which allow them to be called from the CVS working directory [cvs-buildpackage] - cvs-debrelease: wrapper around debrelease which allows it to be called from the CVS working directory [cvs-buildpackage, dupload | dput, ssh-client] - cvs-debuild: wrapper for cvs-buildpackage to use debuild as its package building program [cvs-buildpackage, fakeroot, lintian, gnupg | gnupg2] - dcmd: run a given command replacing the name of a .changes or .dsc file with each of the files referenced therein - dcontrol: remotely query package and source control files for all Debian distributions [liburl-perl, libwww-perl] - dd-list: given a list of packages, pretty-print it ordered by maintainer - debc: display the contents of just-built .debs - debchange/dch: automagically add entries to debian/changelog files [libdistro-info-perl, libsoap-lite-perl] - debcheckout: checkout the development repository of a Debian package - debclean: clean a Debian source tree [fakeroot] - debcommit: commit changes to cvs, darcs, svn, svk, tla, bzr, git, or hg, basing commit message on changelog [cvs | darcs | subversion | svk | tla | bzr | git-core | mercurial, libtimedate-perl] - debdiff: compare two versions of a Debian package to check for added and removed files. Use the diffoscope package for deep comparisons. [wdiff, patchutils] - debdiff-apply: apply unified diffs of two Debian source packages, such as generated by debdiff, to a target source package [python3-unidiff, quilt] - debi: install a just-built package - debpkg: dpkg wrapper to be able to manage/test packages without su - debrepro: reproducibility tester for Debian packages [faketime, diffoscope, disorderfs] - debrelease: wrapper around dupload or dput [dupload | dput, ssh-client] - debsign, debrsign: sign a .changes/.dsc pair without needing any of the rest of the package to be present; can sign the pair remotely or fetch the pair from a remote machine for signing [gnupg | gnupg2, debian-keyring, ssh-client] - debsnap: grab packages from http://snapshot.debian.org [libwww-perl] - debuild: wrapper to build a package without having to su or worry about how to invoke dpkg to build using fakeroot. Also deals with common environment problems, umask etc. [fakeroot, lintian, gnupg | gnupg2] - deb-reversion: increase a binary package version number and repacks the package, useful for porters and the like - dep3changelog: generate a changelog entry from a DEP3-style patch header - desktop2menu: given a freedesktop.org desktop file, generate a skeleton for a menu file [libfile-desktopentry-perl] - dget: download Debian source and binary packages [wget | curl] - diff2patches: extract patches from a .diff.gz file placing them under debian/ or, if present, debian/patches [patchutils] - dpkg-depcheck, dpkg-genbuilddeps: determine the packages used during the build of a Debian package; useful for determining the Build-Depends control field needed [build-essential, strace] - dscextract: extract a single file from a Debian source package [patchutils] - dscverify: verify the integrity of a Debian package from the .changes or .dsc files [gnupg | gnupg2, debian-keyring] - edit-patch: add/edit a patch for a source package and commit the changes [quilt | dpatch | cdbs] - getbuildlog: download package build logs from Debian auto-builders [wget] - git-deborig: try to produce Debian orig.tar using git-archive(1) [libdpkg-perl, libgit-wrapper-perl, liblist-compare-perl] - grep-excuses: grep britney's excuses for your packages [libterm-size-perl, libyaml-syck-perl, wget, w3m] - list-unreleased: search for unreleased packages - manpage-alert: locate binaries without corresponding manpages [man-db] - mass-bug: mass-file bug reports [bsd-mailx | mailx] - mergechanges: merge .changes files from the same release but built on different architectures - mk-build-deps: given a package name and/or control file, generate a binary package which may be installed to satisfy the build-dependencies of the given package [equivs] - mk-origtargz: rename upstream tarball, optionally changing the compression and removing unwanted files [unzip, xz-utils, file] - namecheck: check project names are not already taken - nmudiff: mail a diff of the current package against the previous version to the BTS to assist in tracking NMUs [patchutils, mutt] - origtargz: fetch the orig tarball of a Debian package from various sources, and unpack it - plotchangelog: view a nice plot of the data in a changelog file [libtimedate-perl, gnuplot] - pts-subscribe: subscribe to the PTS for a limited period of time [bsd-mailx | mailx, at] - rc-alert: list installed packages which have release-critical bugs [wget | curl] - rmadison: remotely query the Debian archive database about packages [liburi-perl, wget | curl] - sadt: run DEP-8 tests [python3-debian] - suspicious-source: output a list of files which are not common source files [python3-magic] - svnpath: print Subversion repository paths [subversion] - tagpending: run from a Debian source tree and tag bugs that are to be closed in the latest changelog as pending [libsoap-lite-perl] - transition-check: check a list of source packages for involvement in transitions for which uploads to unstable are currently blocked [libwww-perl, libyaml-syck-perl] - uscan: scan upstream sites for new releases of packages [gpgv | gpgv2, gnupg |gnupg2, liblwp-protocol-https-perl, libwww-perl, unzip, xz-utils, file] - uupdate: integrate upstream changes into a source package [patch] - what-patch: determine what patch system, if any, a source package is using [patchutils] - whodepends: check which maintainers' packages depend on a package - who-uploads: determine the most recent uploaders of a package to the Debian archive [gnupg | gnupg2, debian-keyring, debian-maintainers, wget] - wnpp-alert: list installed packages which are orphaned or up for adoption [wget | curl] - wnpp-check: check whether there is an open request for packaging or intention to package bug for a package [wget | curl] - who-permits-upload: Retrieve information about Debian Maintainer access control lists [gnupg | gnupg2, libencode-locale-perl, libwww-perl, debian-keyring] - wrap-and-sort: wrap long lines and sort items in packaging files [python3-debian] . Also included are a set of example mail filters for filtering mail from Debian mailing lists using exim, procmail, etc.
PackageMaintainer	Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
PackageName	devscripts
PackageSection	devel
PackageVersion	2.17.9ubuntu0.1
SHA-1	1AB08463D02D94097A4770F9FFD1980240C75A33
SHA-256	D21C765F5F4585F506868827D55479F2602A865EA2DA877876A261BB83EE34A8