Parents (Total: 90)

The searched file hash is included in 90 parent files which include package known and seen by metalookup. A sample is included below:

Key	Value
FileName	https://ftp.lysator.liu.se/pub/OpenBSD/6.9/packages//powerpc64//p5-Net-SSH-Perl-2.14p1.tgz
MD5	EEA273A46CF25887558EA9CCB98FA411
SHA-1	00799B2CF86334FCB9374703723C29D1EFBCBA24
SHA-256	A7DFF3F744689F125BF9D16DBD5C0268BB72EC622A8FB5AA07DC87B5D9FF1655
SSDEEP	6144:s4vf1xBTY21mgHsee+xWPIN0nzWaseg8p8Rz:s4NLpe+YPQ0nzqegp
TLSH	T1EB3422B9D7C464273E477C5725B539F2004183D49BB38880F7E899A06064B9AFCEB7B2

Key	Value
MD5	2A6BC12C8988555638661BCE1E7842D8
PackageArch	x86_64
PackageDescription	Net::SSH::Perl is a mostly-Perl module implementing an SSH (Secure Shell) client. It is compatible with both the SSH-1 and SSH-2 protocols.
PackageMaintainer	Fedora Project
PackageName	perl-Net-SSH-Perl
PackageRelease	11.fc34
PackageVersion	2.14
SHA-1	01D5037E01C778FA765B5EA8C8B4F3A5936A7713
SHA-256	E615D068CB78A658F4270363C19A11DB00D7DCAFCE9337E5835D9821CA22DD05

Key	Value
FileName	https://ftp.lysator.liu.se/pub/OpenBSD/6.5/packages//amd64//p5-Net-SSH-Perl-2.14p0.tgz
MD5	6BCD491AF0BBF080A51E0AA5EE9A7100
SHA-1	03FABD802BC48E533D5E758983AAEB886F73EF05
SHA-256	3D0FE4A69BFACF8A23A81FDB78227ADB1A907F01C2C354FCAEE9146A91C1AA76
SSDEEP	6144:J6RLdx1JT//yKwmHcR2S1o2abLEIFaa0U++31plk0vYewvCqJ7fgR:J6Vdx1JT1C2S1oD5FTj++31pVgzvCqJg
TLSH	T1143423D924B04B36E780B9B3C9D6F1416460D5669CFDB819C0B82E98B50A3BE96CF073

Key	Value
FileName	https://ftp.lysator.liu.se/pub/OpenBSD/6.6/packages//mips64el//p5-Net-SSH-Perl-2.14p0.tgz
MD5	A17017F738A7A419930ED295DB4345A7
SHA-1	079F8716DBC89BCF134D058C15064299F4F437D5
SHA-256	0B088F064BDC9F6648A03B3F96FA4BC51F952D801C1014C68170210F8EEF83A0
SSDEEP	6144:hxP9DI1L6/jYhVfiXxF2iqWSqUFTVD8YvDTU3McLSr+FR/:hxlDUWch1iXxFP2D8YvXU3McerE
TLSH	T15E3413A4B93705741CF6C956E4C112D53138D0FC3CFB6C7BB8E0DA4AA1B858E5A9A783

Key	Value
FileName	https://ftp.lysator.liu.se/pub/OpenBSD/6.9/packages//powerpc//p5-Net-SSH-Perl-2.14p1.tgz
MD5	7CDC120768C5FA8E158A61548F673DBA
SHA-1	09C9C54C9F50D477527FDA00B9BF7D2EB2798790
SHA-256	A3444C2616EB45187982640714FBCDD71C01C44AE0CBB3E2A597A01E8D87AC2E
SSDEEP	6144:8gGTVrcjslJiaR25EDZRut5jWno25603Waseg8p8Rz:8gQrcjsv2xL25603qegp
TLSH	T1F6442398E634107DCECA9553568EE1BF0A1F90E5D3874492DCE4A337A08A3477DB06AB

Key	Value
MD5	5C2C212D14B4602D42D7A8BEE3F95E93
PackageArch	armv7hl
PackageDescription	Net::SSH::Perl is an all-Perl module implementing an SSH (Secure Shell) client. It is compatible with both the SSH-1 and SSH-2 protocols.
PackageMaintainer	tv <tv>
PackageName	perl-Net-SSH-Perl
PackageRelease	5.mga7
PackageVersion	2.140.0
SHA-1	09F3200433D17F4F393BEB9E3FA08BA5E31670F9
SHA-256	4CF39D6E97ED94A69AA5B600561A72A9593262A8B56D090AF57DDD33F459A59D

Key	Value
MD5	D0860DBCBC553A2DEDBD23977637977A
PackageArch	i586
PackageDescription	_Net::SSH::Perl_ is an all-Perl module implementing an SSH (Secure Shell) client. It is compatible with both the SSH-1 and SSH-2 protocols. _Net::SSH::Perl_ enables you to simply and securely execute commands on remote machines, and receive the STDOUT, STDERR, and exit status of that remote command. It contains built-in support for various methods of authenticating with the server (password authentication, RSA challenge-response authentication, etc.). It completely implements the I/O buffering, packet transport, and user authentication layers of the SSH protocol, and makes use of external Perl libraries (in the Crypt:: family of modules) to handle encryption of all data sent across the insecure network. It can also read your existing SSH configuration files (_/etc/ssh_config_, etc.), RSA identity files, ECDSA identity files, Ed25519 identity files, known hosts files, etc. One advantage to using _Net::SSH::Perl_ over wrapper-style implementations of ssh clients is that it saves on process overhead: you no longer need to fork and execute a separate process in order to connect to an sshd. Depending on the amount of time and memory needed to fork a process, this win can be quite substantial; particularly if you're running in a persistent Perl environment (_mod_perl_, for example), where forking a new process is a drain on process and memory resources. It also simplifies the process of using password-based authentications; when writing a wrapper around _ssh_ you probably need to use _Expect_ to control the ssh client and give it your password. _Net::SSH::Perl_ has built-in support for the authentication protocols, so there's no longer any hassle of communicating with any external processes. The SSH2 protocol support (present in _Net::SSH::Perl_ as of version 1.00) is compatible with the SSH2 implementation in OpenSSH, and should also be fully compatible with the "official" SSH implementation. If you find an SSH2 implementation that is not compatible with _Net::SSH::Perl_, please let me know (email address down in _AUTHOR & COPYRIGHTS_); it turns out that some SSH2 implementations have subtle differences from others. AES-CTR ('aes256-ctr', 'aes192-ctr', and 'aes128-ctr') and Chacha20-Poly1305 ciphers are currently supported for SSH2 encryption. Deprecated ciphers AES-CBC ('aes256-cbc', 'aes192-cbc', and 'aes128-cbc') 3DES ('3des-cbc'), Blowfish ('blowfish-cbc'), and RC4 ('arcfour') are available but not enabled by default. One can enable them by using the Ciphers options parameter. For example: options => [ "Ciphers +aes256-cbc" ] Using the + notation will append a cipher to the default ciphers list. Integrity checking is performed by the 'hmac-sha2-256', 'hmac-sha2-512', 'hmac-sha2-256-etm@openssh.com', or 'hmac-sha2-512-etm@openssh.com' algorithms. The deprecated 'hmac-sha1' or 'hmac-md5' algorithms are available but not enabled by default. Many older SSH server installations still use hmac-sha1 as the main accepted MAC algorithm. To enable this, use the following options parameter: options => [ "MACs +hmac-sha1" ] Compression, if requested, is limited to Zlib. Supported server host key algorithms are 'ssh-ed25519', 'rsa-sha2-512', 'rsa-sha2-256', 'ecdsa-sha2-nistp521', 'ecdsa-sha2-nistp384', 'ecdsa-sha2-nistp256', and 'ssh-rsa'. Deprecated 'ssh-dss' is supported but not enabled by default. It can be enabled with the options parameter: options => [ "HostKeyAlgorithms +ssh-dss" ] Supported SSH2 public key authentication algorithms are the same. Supported Key Exchange (KEX) algorithms are 'diffie-hellman-group1-sha1', 'diffie-hellman-group14-sha1', c<diffie-hellman-group14-sha256>, 'diffie-hellman-group16-sha512', 'diffie-hellman-group18-sha512', 'diffie-hellman-group-exchange-sha256', 'diffie-hellman-group-exchange-sha1', and 'curve25519-sha256@libssh.org'/'curve25519-sha256'. The 'diffie-hellman-group1-sha1' algorithm is disabled by default, but can be activated via the options parameter: options => [ "KexAlgorithms +diffie-hellman-group1-sha1" ] If you're looking for SFTP support, take a look at _Net::SFTP_, which provides a full-featured Perl implementation of SFTP, and sits on top of _Net::SSH::Perl_. SFTP requires the usage of the SSH2 protocol.
PackageName	perl-Net-SSH-Perl
PackageRelease	1.91
PackageVersion	2.14
SHA-1	1280108A5EFEB354B5B2065C498296A420A8B8DF
SHA-256	C94AD3C2E45EC47B5A458992482A4546B2A0C5E3E032F7B5F7CA2F471A89066C

Key	Value
FileName	https://ftp.lysator.liu.se/pub/OpenBSD/6.7/packages//amd64//p5-Net-SSH-Perl-2.14p0.tgz
MD5	5F7FF493711A8C691FD81C1C9DDABE37
SHA-1	13F5C5D998DC20B85F2416CB7B5B7132A4A8A8C1
SHA-256	BC1A7532B6A07812FE65B7C49138E40CEC7B77B833C56583552AE88FD7B1A684
SSDEEP	6144:N6sLdx1JT//yKwmHcR27vDebc1BjQlUS+v3D2VB3+YZcLSwGwsUvjLW:N6Cdx1JT1C27vK41tQSv6ZceRwsCO
TLSH	T17434224A49A32333F545E4B2E1D982C5C5D26C2760FBB5B7E1BC0C9A3583ACD4E947B2

Key	Value
MD5	BC8164A0BABCF405A53902695D215689
PackageArch	x86_64
PackageDescription	_Net::SSH::Perl_ is an all-Perl module implementing an SSH (Secure Shell) client. It is compatible with both the SSH-1 and SSH-2 protocols. _Net::SSH::Perl_ enables you to simply and securely execute commands on remote machines, and receive the STDOUT, STDERR, and exit status of that remote command. It contains built-in support for various methods of authenticating with the server (password authentication, RSA challenge-response authentication, etc.). It completely implements the I/O buffering, packet transport, and user authentication layers of the SSH protocol, and makes use of external Perl libraries (in the Crypt:: family of modules) to handle encryption of all data sent across the insecure network. It can also read your existing SSH configuration files (_/etc/ssh_config_, etc.), RSA identity files, ECDSA identity files, Ed25519 identity files, known hosts files, etc. One advantage to using _Net::SSH::Perl_ over wrapper-style implementations of ssh clients is that it saves on process overhead: you no longer need to fork and execute a separate process in order to connect to an sshd. Depending on the amount of time and memory needed to fork a process, this win can be quite substantial; particularly if you're running in a persistent Perl environment (_mod_perl_, for example), where forking a new process is a drain on process and memory resources. It also simplifies the process of using password-based authentications; when writing a wrapper around _ssh_ you probably need to use _Expect_ to control the ssh client and give it your password. _Net::SSH::Perl_ has built-in support for the authentication protocols, so there's no longer any hassle of communicating with any external processes. The SSH2 protocol support (present in _Net::SSH::Perl_ as of version 1.00) is compatible with the SSH2 implementation in OpenSSH, and should also be fully compatible with the "official" SSH implementation. If you find an SSH2 implementation that is not compatible with _Net::SSH::Perl_, please let me know (email address down in _AUTHOR & COPYRIGHTS_); it turns out that some SSH2 implementations have subtle differences from others. AES-CTR ('aes256-ctr', 'aes192-ctr', and 'aes128-ctr') and Chacha20-Poly1305 ciphers are currently supported for SSH2 encryption. Deprecated ciphers AES-CBC ('aes256-cbc', 'aes192-cbc', and 'aes128-cbc') 3DES ('3des-cbc'), Blowfish ('blowfish-cbc'), and RC4 ('arcfour') are available but not enabled by default. One can enable them by using the Ciphers options parameter. For example: options => [ "Ciphers +aes256-cbc" ] Using the + notation will append a cipher to the default ciphers list. Integrity checking is performed by the 'hmac-sha2-256', 'hmac-sha2-512', 'hmac-sha2-256-etm@openssh.com', or 'hmac-sha2-512-etm@openssh.com' algorithms. The deprecated 'hmac-sha1' or 'hmac-md5' algorithms are available but not enabled by default. Many older SSH server installations still use hmac-sha1 as the main accepted MAC algorithm. To enable this, use the following options parameter: options => [ "MACs +hmac-sha1" ] Compression, if requested, is limited to Zlib. Supported server host key algorithms are 'ssh-ed25519', 'rsa-sha2-512', 'rsa-sha2-256', 'ecdsa-sha2-nistp521', 'ecdsa-sha2-nistp384', 'ecdsa-sha2-nistp256', and 'ssh-rsa'. Deprecated 'ssh-dss' is supported but not enabled by default. It can be enabled with the options parameter: options => [ "HostKeyAlgorithms +ssh-dss" ] Supported SSH2 public key authentication algorithms are the same. Supported Key Exchange (KEX) algorithms are 'diffie-hellman-group1-sha1', 'diffie-hellman-group14-sha1', c<diffie-hellman-group14-sha256>, 'diffie-hellman-group16-sha512', 'diffie-hellman-group18-sha512', 'diffie-hellman-group-exchange-sha256', 'diffie-hellman-group-exchange-sha1', and 'curve25519-sha256@libssh.org'/'curve25519-sha256'. The 'diffie-hellman-group1-sha1' algorithm is disabled by default, but can be activated via the options parameter: options => [ "KexAlgorithms +diffie-hellman-group1-sha1" ] If you're looking for SFTP support, take a look at _Net::SFTP_, which provides a full-featured Perl implementation of SFTP, and sits on top of _Net::SSH::Perl_. SFTP requires the usage of the SSH2 protocol.
PackageName	perl-Net-SSH-Perl
PackageRelease	lp150.1.2
PackageVersion	2.14
SHA-1	15553BBB4F0A4BD274A0482FEA59D3A15C8BA2D4
SHA-256	F2BBC5BE48CF2310C3ECD7D13097D0CAA4763A9D0C2021F923E21AE154D53828

Key	Value
MD5	A4A3631D8051FA61B0BC975D6CE16BB1
PackageArch	x86_64
PackageDescription	This package provides debug sources for package perl-Net-SSH-Perl. Debug sources are useful when developing applications that use this package or when debugging this package.
PackageMaintainer	tv <tv>
PackageName	perl-Net-SSH-Perl-debugsource
PackageRelease	8.mga8
PackageVersion	2.140.0
SHA-1	1AAC38C357DC05CA5F0A8C5E381BB37AC2D418C8
SHA-256	5F8799AC4F5D79F198121D8DE8656BAD5FD3B4EC7F6D02C75E9482C7F9C0EFF8