Parents (Total: 65)

The searched file hash is included in 65 parent files which include package known and seen by metalookup. A sample is included below:

Key	Value
MD5	EB586D76A9D76CA957117B8EF6EC3D6F
PackageArch	x86_64
PackageDescription	This library allows for the identification of a file's likely MIME content type. This is release 1.25.1, fixing an issue with priority comparison for mime-types 1.x. The current release is 2.0, which only supports Ruby 1.9 or later. Release 1.25.1 contains all features of 1.25, including the experimental caching and lazy loading functionality. The caching and lazy loading features were initially implemented by Greg Brockman (gdb). As these features are experimental, they are disabled by default and must be enabled through the use of environment variables. The cache is invalidated on a per-version basis; the cache for version 1.25 will not be reused for any later version. To use lazy loading, set the environment variable +RUBY_MIME_TYPES_LAZY_LOAD+ to any value other than 'false'. When using lazy loading, the initial startup of MIME::Types is around 12–25× faster than normal startup (on my system, normal startup is about 90 ms; lazy startup is about 4 ms). This isn't generally useful, however, as the MIME::Types database has not been loaded. Lazy startup and load is just *slightly* faster—around 1 ms. The real advantage comes from using the cache. To enable the cache, set the environment variable +RUBY_MIME_TYPES_CACHE+ to a filename where MIME::Types will have read-write access. The first time a new version of MIME::Types is run using this file, it will be created, taking a little longer than normal. Subsequent loads using the same cache file will be approximately 3½× faster (25 ms) than normal loads. This can be combined with +RUBY_MIME_TYPES_LAZY_LOAD+, but this is *not* recommended in a multithreaded or multiprocess environment where all threads or processes will be using the same cache file. As the caching interface is still experimental, the only values cached are the default MIME::Types database, not any custom MIME::Types added by users. MIME types are used in MIME-compliant communications, as in e-mail or HTTP traffic, to indicate the type of content which is transmitted. MIME::Types provides the ability for detailed information about MIME entities (provided as a set of MIME::Type objects) to be determined and used programmatically. There are many types defined by RFCs and vendors, so the list is long but not complete; don't hesitate to ask to add additional information. This library follows the IANA collection of MIME types (see below for reference). MIME::Types for Ruby was originally based on MIME::Types for Perl by Mark Overmeer, copyright 2001 - 2009. MIME::Types is built to conform to the MIME types of RFCs 2045 and 2231. It tracks the {IANA registry}[http://www.iana.org/assignments/media-types/] ({ftp}[ftp://ftp.iana.org/assignments/media-types]) with some unofficial types added from the {LTSW collection}[http://www.ltsw.se/knbase/internet/mime.htp] and added by the users of MIME::Types.
PackageMaintainer	https://bugs.opensuse.org
PackageName	ruby2.5-rubygem-mime-types-1
PackageRelease	lp151.2.1
PackageVersion	1.25.1
SHA-1	00AE9723D83A90F9785907E350983E06BE96CFD1
SHA-256	9692DFAABEEC79DB6A2613952044CEAC902C69303BE66DB864E0DA2BDC971BCF

Key	Value
MD5	0E0DBC6C28D3FF5C7CFDE6AF912187CD
PackageArch	noarch
PackageDescription	MIME::Types for Ruby manages a MIME Content-Type database that will return the Content-Type for a given filename. MIME::Types was originally based on and synchronized with MIME::Types for Perl by Mark Overmeer, copyright 2001 - 2009. As of version 1.15, the data format for the MIME::Type list has changed and the synchronization will no longer happen.
PackageMaintainer	Fedora Project
PackageName	rubygem-mime-types
PackageRelease	1.fc21
PackageVersion	1.25.1
SHA-1	07038484AD97DD08D762D26352052A94C8DB6A40
SHA-256	A8AE40433F0C470A5B7924A7BC603DAD483AD480D948EC527AB60B7AD7BF84E6

Key	Value
MD5	FFBCBE2491B946DD0FF2DE13FB9989C4
PackageArch	i586
PackageDescription	This library allows for the identification of a file's likely MIME content type. This is release 1.25.1, fixing an issue with priority comparison for mime-types 1.x. The current release is 2.0, which only supports Ruby 1.9 or later. Release 1.25.1 contains all features of 1.25, including the experimental caching and lazy loading functionality. The caching and lazy loading features were initially implemented by Greg Brockman (gdb). As these features are experimental, they are disabled by default and must be enabled through the use of environment variables. The cache is invalidated on a per-version basis; the cache for version 1.25 will not be reused for any later version. To use lazy loading, set the environment variable +RUBY_MIME_TYPES_LAZY_LOAD+ to any value other than 'false'. When using lazy loading, the initial startup of MIME::Types is around 12–25× faster than normal startup (on my system, normal startup is about 90 ms; lazy startup is about 4 ms). This isn't generally useful, however, as the MIME::Types database has not been loaded. Lazy startup and load is just *slightly* faster—around 1 ms. The real advantage comes from using the cache. To enable the cache, set the environment variable +RUBY_MIME_TYPES_CACHE+ to a filename where MIME::Types will have read-write access. The first time a new version of MIME::Types is run using this file, it will be created, taking a little longer than normal. Subsequent loads using the same cache file will be approximately 3½× faster (25 ms) than normal loads. This can be combined with +RUBY_MIME_TYPES_LAZY_LOAD+, but this is *not* recommended in a multithreaded or multiprocess environment where all threads or processes will be using the same cache file. As the caching interface is still experimental, the only values cached are the default MIME::Types database, not any custom MIME::Types added by users. MIME types are used in MIME-compliant communications, as in e-mail or HTTP traffic, to indicate the type of content which is transmitted. MIME::Types provides the ability for detailed information about MIME entities (provided as a set of MIME::Type objects) to be determined and used programmatically. There are many types defined by RFCs and vendors, so the list is long but not complete; don't hesitate to ask to add additional information. This library follows the IANA collection of MIME types (see below for reference). MIME::Types for Ruby was originally based on MIME::Types for Perl by Mark Overmeer, copyright 2001 - 2009. MIME::Types is built to conform to the MIME types of RFCs 2045 and 2231. It tracks the {IANA registry}[http://www.iana.org/assignments/media-types/] ({ftp}[ftp://ftp.iana.org/assignments/media-types]) with some unofficial types added from the {LTSW collection}[http://www.ltsw.se/knbase/internet/mime.htp] and added by the users of MIME::Types.
PackageName	ruby3.0-rubygem-mime-types-1
PackageRelease	15.25
PackageVersion	1.25.1
SHA-1	09B69D9CBEC9DB2CA57ED79CC331F772690C74AF
SHA-256	A0EA9C124FC4DDF9CB616C261FED7BC3A2DA6D9CAC24043FAB837F66E437E590

Key	Value
MD5	4E66352CDDFAFF93E62304947C47558C
PackageArch	noarch
PackageDescription	MIME::Types for Ruby manages a MIME Content-Type database that will return the Content-Type for a given filename. MIME::Types was originally based on and synchronized with MIME::Types for Perl by Mark Overmeer, copyright 2001 - 2009. As of version 1.15, the data format for the MIME::Type list has changed and the synchronization will no longer happen.
PackageMaintainer	Fedora Project
PackageName	rubygem-mime-types
PackageRelease	1.fc21
PackageVersion	1.25.1
SHA-1	0D9D618AB3B0B840365DC9F4E9010E4BF52CE78D
SHA-256	002C73D67085B4D288398DB02E490A79649E790F33302F4BA73BFFF0BE87F434

Key	Value
MD5	96B07E69CAC83D62D7EFBA98B071347E
PackageArch	x86_64
PackageDescription	This library allows for the identification of a file's likely MIME content type. This is release 1.25.1, fixing an issue with priority comparison for mime-types 1.x. The current release is 2.0, which only supports Ruby 1.9 or later. Release 1.25.1 contains all features of 1.25, including the experimental caching and lazy loading functionality. The caching and lazy loading features were initially implemented by Greg Brockman (gdb). As these features are experimental, they are disabled by default and must be enabled through the use of environment variables. The cache is invalidated on a per-version basis; the cache for version 1.25 will not be reused for any later version. To use lazy loading, set the environment variable +RUBY_MIME_TYPES_LAZY_LOAD+ to any value other than 'false'. When using lazy loading, the initial startup of MIME::Types is around 12–25× faster than normal startup (on my system, normal startup is about 90 ms; lazy startup is about 4 ms). This isn't generally useful, however, as the MIME::Types database has not been loaded. Lazy startup and load is just *slightly* faster—around 1 ms. The real advantage comes from using the cache. To enable the cache, set the environment variable +RUBY_MIME_TYPES_CACHE+ to a filename where MIME::Types will have read-write access. The first time a new version of MIME::Types is run using this file, it will be created, taking a little longer than normal. Subsequent loads using the same cache file will be approximately 3½× faster (25 ms) than normal loads. This can be combined with +RUBY_MIME_TYPES_LAZY_LOAD+, but this is *not* recommended in a multithreaded or multiprocess environment where all threads or processes will be using the same cache file. As the caching interface is still experimental, the only values cached are the default MIME::Types database, not any custom MIME::Types added by users. MIME types are used in MIME-compliant communications, as in e-mail or HTTP traffic, to indicate the type of content which is transmitted. MIME::Types provides the ability for detailed information about MIME entities (provided as a set of MIME::Type objects) to be determined and used programmatically. There are many types defined by RFCs and vendors, so the list is long but not complete; don't hesitate to ask to add additional information. This library follows the IANA collection of MIME types (see below for reference). MIME::Types for Ruby was originally based on MIME::Types for Perl by Mark Overmeer, copyright 2001 - 2009. MIME::Types is built to conform to the MIME types of RFCs 2045 and 2231. It tracks the {IANA registry}[http://www.iana.org/assignments/media-types/] ({ftp}[ftp://ftp.iana.org/assignments/media-types]) with some unofficial types added from the {LTSW collection}[http://www.ltsw.se/knbase/internet/mime.htp] and added by the users of MIME::Types.
PackageName	ruby2.6-rubygem-mime-types-1
PackageRelease	lp154.14.2
PackageVersion	1.25.1
SHA-1	111FF501BAC6C20455A8BBFD15543B5FD85CFC8A
SHA-256	69BC22AFACB2C6355ACF94537BF899636369202782DC52B35E34DE919C8DA83D

Key	Value
MD5	614B151BC473C5492B4F83FEA16F5617
PackageArch	i586
PackageDescription	This library allows for the identification of a file's likely MIME content type. This is release 1.25.1, fixing an issue with priority comparison for mime-types 1.x. The current release is 2.0, which only supports Ruby 1.9 or later. Release 1.25.1 contains all features of 1.25, including the experimental caching and lazy loading functionality. The caching and lazy loading features were initially implemented by Greg Brockman (gdb). As these features are experimental, they are disabled by default and must be enabled through the use of environment variables. The cache is invalidated on a per-version basis; the cache for version 1.25 will not be reused for any later version. To use lazy loading, set the environment variable +RUBY_MIME_TYPES_LAZY_LOAD+ to any value other than 'false'. When using lazy loading, the initial startup of MIME::Types is around 12–25× faster than normal startup (on my system, normal startup is about 90 ms; lazy startup is about 4 ms). This isn't generally useful, however, as the MIME::Types database has not been loaded. Lazy startup and load is just *slightly* faster—around 1 ms. The real advantage comes from using the cache. To enable the cache, set the environment variable +RUBY_MIME_TYPES_CACHE+ to a filename where MIME::Types will have read-write access. The first time a new version of MIME::Types is run using this file, it will be created, taking a little longer than normal. Subsequent loads using the same cache file will be approximately 3½× faster (25 ms) than normal loads. This can be combined with +RUBY_MIME_TYPES_LAZY_LOAD+, but this is *not* recommended in a multithreaded or multiprocess environment where all threads or processes will be using the same cache file. As the caching interface is still experimental, the only values cached are the default MIME::Types database, not any custom MIME::Types added by users. MIME types are used in MIME-compliant communications, as in e-mail or HTTP traffic, to indicate the type of content which is transmitted. MIME::Types provides the ability for detailed information about MIME entities (provided as a set of MIME::Type objects) to be determined and used programmatically. There are many types defined by RFCs and vendors, so the list is long but not complete; don't hesitate to ask to add additional information. This library follows the IANA collection of MIME types (see below for reference). MIME::Types for Ruby was originally based on MIME::Types for Perl by Mark Overmeer, copyright 2001 - 2009. MIME::Types is built to conform to the MIME types of RFCs 2045 and 2231. It tracks the {IANA registry}[http://www.iana.org/assignments/media-types/] ({ftp}[ftp://ftp.iana.org/assignments/media-types]) with some unofficial types added from the {LTSW collection}[http://www.ltsw.se/knbase/internet/mime.htp] and added by the users of MIME::Types.
PackageName	ruby3.0-rubygem-mime-types-1
PackageRelease	15.27
PackageVersion	1.25.1
SHA-1	2397FEBF29ED0CC67007CC4F28462D3D1FAFD511
SHA-256	E2F786B4359E915B9FF1E82F81AB33F96B2F11087ED62506B949F32E7683D56D

Key	Value
MD5	9183C77F3254CDC846CCFBC6600870EA
PackageArch	i586
PackageDescription	This library allows for the identification of a file's likely MIME content type. This is release 1.25.1, fixing an issue with priority comparison for mime-types 1.x. The current release is 2.0, which only supports Ruby 1.9 or later. Release 1.25.1 contains all features of 1.25, including the experimental caching and lazy loading functionality. The caching and lazy loading features were initially implemented by Greg Brockman (gdb). As these features are experimental, they are disabled by default and must be enabled through the use of environment variables. The cache is invalidated on a per-version basis; the cache for version 1.25 will not be reused for any later version. To use lazy loading, set the environment variable +RUBY_MIME_TYPES_LAZY_LOAD+ to any value other than 'false'. When using lazy loading, the initial startup of MIME::Types is around 12–25× faster than normal startup (on my system, normal startup is about 90 ms; lazy startup is about 4 ms). This isn't generally useful, however, as the MIME::Types database has not been loaded. Lazy startup and load is just *slightly* faster—around 1 ms. The real advantage comes from using the cache. To enable the cache, set the environment variable +RUBY_MIME_TYPES_CACHE+ to a filename where MIME::Types will have read-write access. The first time a new version of MIME::Types is run using this file, it will be created, taking a little longer than normal. Subsequent loads using the same cache file will be approximately 3½× faster (25 ms) than normal loads. This can be combined with +RUBY_MIME_TYPES_LAZY_LOAD+, but this is *not* recommended in a multithreaded or multiprocess environment where all threads or processes will be using the same cache file. As the caching interface is still experimental, the only values cached are the default MIME::Types database, not any custom MIME::Types added by users. MIME types are used in MIME-compliant communications, as in e-mail or HTTP traffic, to indicate the type of content which is transmitted. MIME::Types provides the ability for detailed information about MIME entities (provided as a set of MIME::Type objects) to be determined and used programmatically. There are many types defined by RFCs and vendors, so the list is long but not complete; don't hesitate to ask to add additional information. This library follows the IANA collection of MIME types (see below for reference). MIME::Types for Ruby was originally based on MIME::Types for Perl by Mark Overmeer, copyright 2001 - 2009. MIME::Types is built to conform to the MIME types of RFCs 2045 and 2231. It tracks the {IANA registry}[http://www.iana.org/assignments/media-types/] ({ftp}[ftp://ftp.iana.org/assignments/media-types]) with some unofficial types added from the {LTSW collection}[http://www.ltsw.se/knbase/internet/mime.htp] and added by the users of MIME::Types.
PackageName	ruby3.1-rubygem-mime-types-1
PackageRelease	14.21
PackageVersion	1.25.1
SHA-1	241FDD1A16B79B5DC32C6DE1E96FD36B2B4F8F7D
SHA-256	7A731ACC85047B47FEA3F2D6DF8D2C281C3B26730991C2EECC5495378D4E6876

Key	Value
MD5	A6EB27BAFA5665757B67483C118D98CF
PackageArch	s390x
PackageDescription	This library allows for the identification of a file's likely MIME content type. This is release 1.25.1, fixing an issue with priority comparison for mime-types 1.x. The current release is 2.0, which only supports Ruby 1.9 or later. Release 1.25.1 contains all features of 1.25, including the experimental caching and lazy loading functionality. The caching and lazy loading features were initially implemented by Greg Brockman (gdb). As these features are experimental, they are disabled by default and must be enabled through the use of environment variables. The cache is invalidated on a per-version basis; the cache for version 1.25 will not be reused for any later version. To use lazy loading, set the environment variable +RUBY_MIME_TYPES_LAZY_LOAD+ to any value other than 'false'. When using lazy loading, the initial startup of MIME::Types is around 12–25× faster than normal startup (on my system, normal startup is about 90 ms; lazy startup is about 4 ms). This isn't generally useful, however, as the MIME::Types database has not been loaded. Lazy startup and load is just *slightly* faster—around 1 ms. The real advantage comes from using the cache. To enable the cache, set the environment variable +RUBY_MIME_TYPES_CACHE+ to a filename where MIME::Types will have read-write access. The first time a new version of MIME::Types is run using this file, it will be created, taking a little longer than normal. Subsequent loads using the same cache file will be approximately 3½× faster (25 ms) than normal loads. This can be combined with +RUBY_MIME_TYPES_LAZY_LOAD+, but this is *not* recommended in a multithreaded or multiprocess environment where all threads or processes will be using the same cache file. As the caching interface is still experimental, the only values cached are the default MIME::Types database, not any custom MIME::Types added by users. MIME types are used in MIME-compliant communications, as in e-mail or HTTP traffic, to indicate the type of content which is transmitted. MIME::Types provides the ability for detailed information about MIME entities (provided as a set of MIME::Type objects) to be determined and used programmatically. There are many types defined by RFCs and vendors, so the list is long but not complete; don't hesitate to ask to add additional information. This library follows the IANA collection of MIME types (see below for reference). MIME::Types for Ruby was originally based on MIME::Types for Perl by Mark Overmeer, copyright 2001 - 2009. MIME::Types is built to conform to the MIME types of RFCs 2045 and 2231. It tracks the {IANA registry}[http://www.iana.org/assignments/media-types/] ({ftp}[ftp://ftp.iana.org/assignments/media-types]) with some unofficial types added from the {LTSW collection}[http://www.ltsw.se/knbase/internet/mime.htp] and added by the users of MIME::Types.
PackageMaintainer	https://bugs.opensuse.org
PackageName	ruby2.5-rubygem-mime-types-1
PackageRelease	bp155.2.10
PackageVersion	1.25.1
SHA-1	261069BBF2226B8E29046B5855E4E7ECEC7AB827
SHA-256	5485DC45AAFCBE6C0C76E82F1E0DE59A91232C8674272AA94D3DBA927987B288

Key	Value
MD5	94F4C3376482995AAF75A982190F4175
PackageArch	x86_64
PackageDescription	This library allows for the identification of a file's likely MIME content type. This is release 1.25.1, fixing an issue with priority comparison for mime-types 1.x. The current release is 2.0, which only supports Ruby 1.9 or later. Release 1.25.1 contains all features of 1.25, including the experimental caching and lazy loading functionality. The caching and lazy loading features were initially implemented by Greg Brockman (gdb). As these features are experimental, they are disabled by default and must be enabled through the use of environment variables. The cache is invalidated on a per-version basis; the cache for version 1.25 will not be reused for any later version. To use lazy loading, set the environment variable +RUBY_MIME_TYPES_LAZY_LOAD+ to any value other than 'false'. When using lazy loading, the initial startup of MIME::Types is around 12–25× faster than normal startup (on my system, normal startup is about 90 ms; lazy startup is about 4 ms). This isn't generally useful, however, as the MIME::Types database has not been loaded. Lazy startup and load is just *slightly* faster—around 1 ms. The real advantage comes from using the cache. To enable the cache, set the environment variable +RUBY_MIME_TYPES_CACHE+ to a filename where MIME::Types will have read-write access. The first time a new version of MIME::Types is run using this file, it will be created, taking a little longer than normal. Subsequent loads using the same cache file will be approximately 3½× faster (25 ms) than normal loads. This can be combined with +RUBY_MIME_TYPES_LAZY_LOAD+, but this is *not* recommended in a multithreaded or multiprocess environment where all threads or processes will be using the same cache file. As the caching interface is still experimental, the only values cached are the default MIME::Types database, not any custom MIME::Types added by users. MIME types are used in MIME-compliant communications, as in e-mail or HTTP traffic, to indicate the type of content which is transmitted. MIME::Types provides the ability for detailed information about MIME entities (provided as a set of MIME::Type objects) to be determined and used programmatically. There are many types defined by RFCs and vendors, so the list is long but not complete; don't hesitate to ask to add additional information. This library follows the IANA collection of MIME types (see below for reference). MIME::Types for Ruby was originally based on MIME::Types for Perl by Mark Overmeer, copyright 2001 - 2009. MIME::Types is built to conform to the MIME types of RFCs 2045 and 2231. It tracks the {IANA registry}[http://www.iana.org/assignments/media-types/] ({ftp}[ftp://ftp.iana.org/assignments/media-types]) with some unofficial types added from the {LTSW collection}[http://www.ltsw.se/knbase/internet/mime.htp] and added by the users of MIME::Types.
PackageName	ruby2.7-rubygem-mime-types-1
PackageRelease	lp151.14.2
PackageVersion	1.25.1
SHA-1	2656C0DBEF9414B30F00546BC017907E0024FA68
SHA-256	043E1C406540A6A20A8FF5DA8005226C03648E282A023B6E96854CC12661A633

Key	Value
MD5	E79D60A39F51C82E45DAB882737A8A15
PackageArch	x86_64
PackageDescription	This library allows for the identification of a file's likely MIME content type. This is release 1.25.1, fixing an issue with priority comparison for mime-types 1.x. The current release is 2.0, which only supports Ruby 1.9 or later. Release 1.25.1 contains all features of 1.25, including the experimental caching and lazy loading functionality. The caching and lazy loading features were initially implemented by Greg Brockman (gdb). As these features are experimental, they are disabled by default and must be enabled through the use of environment variables. The cache is invalidated on a per-version basis; the cache for version 1.25 will not be reused for any later version. To use lazy loading, set the environment variable +RUBY_MIME_TYPES_LAZY_LOAD+ to any value other than 'false'. When using lazy loading, the initial startup of MIME::Types is around 12–25× faster than normal startup (on my system, normal startup is about 90 ms; lazy startup is about 4 ms). This isn't generally useful, however, as the MIME::Types database has not been loaded. Lazy startup and load is just *slightly* faster—around 1 ms. The real advantage comes from using the cache. To enable the cache, set the environment variable +RUBY_MIME_TYPES_CACHE+ to a filename where MIME::Types will have read-write access. The first time a new version of MIME::Types is run using this file, it will be created, taking a little longer than normal. Subsequent loads using the same cache file will be approximately 3½× faster (25 ms) than normal loads. This can be combined with +RUBY_MIME_TYPES_LAZY_LOAD+, but this is *not* recommended in a multithreaded or multiprocess environment where all threads or processes will be using the same cache file. As the caching interface is still experimental, the only values cached are the default MIME::Types database, not any custom MIME::Types added by users. MIME types are used in MIME-compliant communications, as in e-mail or HTTP traffic, to indicate the type of content which is transmitted. MIME::Types provides the ability for detailed information about MIME entities (provided as a set of MIME::Type objects) to be determined and used programmatically. There are many types defined by RFCs and vendors, so the list is long but not complete; don't hesitate to ask to add additional information. This library follows the IANA collection of MIME types (see below for reference). MIME::Types for Ruby was originally based on MIME::Types for Perl by Mark Overmeer, copyright 2001 - 2009. MIME::Types is built to conform to the MIME types of RFCs 2045 and 2231. It tracks the {IANA registry}[http://www.iana.org/assignments/media-types/] ({ftp}[ftp://ftp.iana.org/assignments/media-types]) with some unofficial types added from the {LTSW collection}[http://www.ltsw.se/knbase/internet/mime.htp] and added by the users of MIME::Types.
PackageMaintainer	https://bugs.opensuse.org
PackageName	ruby2.5-rubygem-mime-types-1
PackageRelease	bp155.2.10
PackageVersion	1.25.1
SHA-1	2944AB5423D4FA14F206964963381C5DE0AEF7C2
SHA-256	D526B1A067C14B989E70EA61EFB669488F7D3D78B1C5B7EEEB880972EA1FCBD2