Parents (Total: 11)

The searched file hash is included in 11 parent files which include package known and seen by metalookup. A sample is included below:

Key	Value
FileSize	3812304
MD5	CB0BC3BB3158DAE336E9C0FF7AB3A786
PackageDescription	MuseScore 3 (music composition and notation) shared files Demonstration scores and templates, styles, localisations, some plugins for MuseScore, the Open Source (GNU GPL) cross-platform multi-lingual music notation software. . In contrast to earlier versions, no sound font is provided by default, but the Depends ensure a suitable one is installed, normally the compact, full orchestral and band sound, one that is shipped with MuseScore from version 2.2 onwards, or its more limited 2.1 counterpart fluidr3mono-gm-soundfont. In general, any soundfont that Provides musescore-compatible-soundfont will be acceptable; if you installed multiple, run the following command to configure the default MuseScore soundfont (select “0” to ensure that the highest-quality soundfont is used): . $ sudo update-alternatives --config MuseScore_General.sf3
PackageMaintainer	Thorsten Glaser <tg@mirbsd.de>
PackageName	musescore3-common
PackageSection	sound
PackageVersion	3.2.3+dfsg2-11~bpo10+1
SHA-1	749F7BB8D26504DCD187ACF503555309795D2CF4
SHA-256	63EF8715194CFE63CF1143DFB86E7EE91F606626659ED21CC6D03237B7FB8487

Key	Value
FileSize	7083896
MD5	766B03F5AC7525A89969DF2263835DB3
PackageDescription	cross-platform multi-lingual music composition and notation, v3 MuseScore is an Open Source (GNU GPL) music notation software that runs on all platforms supported by Qt5 (GNU/Linux, MacOS X, Windows), and is available in over forty different languages. It features an easy to use WYSIWYG editor with audio score playback for results that look and sound beautiful, rivaling commercial offerings like Finale and Sibelius. . This package provides MuseScore 3. You can install multiple versions of MuseScore in parallel, and upstream recommends doing so, because each major version has a new, incompatible, layout engine, and changing old scores without relayouting them fully with the new version can only be done by the old version. For MuseScore 2, install the musescore package, and expect a musescore4 package to show up in Debian bookworm. . Create, play back and print sheet music for free. Features include: - easy-to-use and customisable interface - optional dark theme (to focus on the score) - tours for first-time and returning users - albums combining multiple scores - unlimited score length - unlimited number of staves per system - up to four independent voices per staff - score creation wizard and templates - easy and fast note entry with a (PC) keyboard, the mouse, including an on-screen virtual (piano) keyboard, or MIDI (step-time, real-time) - timewise input (moving subsequent notes/rests), also for unmetered music - half-time and double-time paste commands for copy/paste - continuous view: focus on the content, scrolling by as an endless ribbon, undistracted by line breaks or page breaks; switch to page view to polish up for printing - timeline view - automatic part extraction (by staves or voices) and transposition - advanced transposition: transpose a selected passage to any key, or by any interval — or even transpose diatonically within the same key - repeats, including segnos, codas, measure repeats, advanced repeats; linearisation command to expand repeats - dynamics, articulations and other expression markings - playback support for almost all notation elements - custom text markings - style rules that apply to the whole score at once - automatic placement system (smart layout), now even more flexible - lyrics - chord symbols - Jazz notation, including lead sheets and slash notation - swing and shuffle playback - integrated sequencer and two software synthesisers (FluidSynth for SF2/SF3, Zerberus for SFZ), which also can use third-party soundfonts - single-note dynamics - mixer for instrument levels and effects - mixing and panning for individual parts - percussion notation - sticking (“fingering” for drummers) - early music notation - cross-staff beaming - import of graphics - custom key signatures - additive time signatures - system dividers - user-defined score styles - cutaway staves - pianoroll editor, edit playback parameters of each note individually - score comparison tool - and much more… . Choir features: - powerful lyrics copy and paste tools - implode/explode: combine up to four voices on one staff, then separate to individual staves - hide empty vocal staves, such as in a piano intro - figured bass for historical notation - smart lyrics: unlimited verses, with notes and staves automatically spaced, and verse numbers automatically aligned - voice leading checker: download the Check Harmony Rules proofreading plugin to check for errors in your part writing, according to standard rules - part mixer: mute, solo, or change volume of staves to learn individual lines — settings even apply to MP3 export . Piano features: - support for solo + piano (add small staff with different instrument) - support for cadenzas (smaller notes and variable length measures) - complete notation: pedaling, fingering, cross-staff beaming — you name it; everything needed to write piano sheet music is here . Guitar features: - bends, fingerings, and other common guitar notations supported - add/remove linked staves any time; enter notes on either standard (pitched five-line) or TAB staff - percussion/drumset also included - templates include guitar, tablature, guitar+tablature, rock/pop band - complete tablature: multiple tab styles available — from note symbols outside the staff to upside-down strings — and linked standard/tab staff pairs - Guitar Pro import: MuseScore can now open files from Guitar Pro, so you can easily migrate over. Import filters are improving with every release; GP3, GP4, GP5, GP6, GTP, GPX are currently supported. - Fretboard diagrams: 21 default chords for every key, and a powerful editor to create your own — with barre, fret position, and any number of strings - multiple or differently shaped dots per string; partial and multiple barres; ability to not show nut; customisable string/fret distance; chord symbols for diagrams and saving those to the palette; etc. - beyond guitar: banjo, mandolin, ukulele, oud; custom string tunings; even historical lute tablature: MuseScore does them all. . Orchestral features: - templates for common instrumentations - custom linked parts (e.g. create choral score from orchestra+chorus): any change you make to the content of any part is immediately reflected in the full score — and vice versa - powerful style controls: edit the formatting of parts and score independently — or apply the same style to all parts with one click - one-click transposition: instantly switch between transposed and concert pitch: sounding pitches stay the same while the written notes change . Jazz features: - templates for Jazz Lead Sheet, Big Band and Jazz Combo - real “handwritten” Book-style jazz font for text and chord symbols - formatting tools include adding line breaks every X measures - instantly switch between transposed and concert pitch - intelligent chord symbol: chord names are automatically formatted when you finish typing — plus, they transpose with the notes - easy slashes: commands to fill bars with slashes — and to turn notes into rhythmic slashes, and even accent notation above the staff . Marching ensembles features (needs the MDL extension): - marching band, indoor percussion, front ensemble, drumline and drum corps (even G bugles); no setup or configuration — select a template, start writing . Band features: - diverse templates: concert band, brass band, marching band, battery and pit percussion — ready out-of-the-box (plus big band for jazz) - custom linked parts: you can even keep a drumline score linked to a full marching band score and to individual percussion parts . Most elements in MuseScore are laid out automatically on a “virtual note sheet”, with a near professional-quality layout engine, but can also be positioned manually, giving you total control of every score element’s position. The capabilities of MuseScore can be extended via plugins and extensions, and the growing repository on musescore.org contains many plugins submitted by users and an active development team. . MuseScore includes a set of sounds that reproduce common instruments (as defined by General MIDI) without taking up a lot of disk space or memory providing full orchestral and band sounds (with the Drumline extension installed this includes marching percussion). The general (non-Drumline) sound font is available as musescore-general-soundfont Debian package, if you wish to reuse it with other synthesisers.) You can also load any sound font you prefer for a wider variety of sounds or for more realism. . MuseScore can import and export MIDI and MusicXML files, and it can also import from Capella and several other programs. MuseScore can export to PDF, PNG, and other graphic formats, to WAV and other audio formats such as OGG Vorbis and MP3, or to GNU Lilypond for an alternative layout and print option. . MuseScore can upload scores to musescore.com, a score sharing site, and send scrolling sheet music videos to YouTube. In addition to the desktop software, you can rehearse “on the go” with MuseScore mobile apps (which do not support note entry, but many advanced playback functions). Note that all of these are commercial or otherwise non-free offers optionally integrated with, but not part of, the Free notation program. Scrolling video scores feature the notes highlighted in the score as they sound — and highlighted on a virtual piano keyboard below.
PackageMaintainer	Thorsten Glaser <tg@mirbsd.de>
PackageName	musescore3
PackageSection	sound
PackageVersion	3.2.3+dfsg2-11~bpo10+1
SHA-1	46DE6F6D7D3BD3D45E1D1EEAF431E79044FE6167
SHA-256	E6D347B086AEE5597523818CCF941EB1DF4514B9CDF5284155B36013BBC992F6

Key	Value
FileSize	7035088
MD5	F4F63B360442FEE23CBD2646F8067524
PackageDescription	cross-platform multi-lingual music composition and notation, v3 MuseScore is an Open Source (GNU GPL) music notation software that runs on all platforms supported by Qt5 (GNU/Linux, MacOS X, Windows), and is available in over forty different languages. It features an easy to use WYSIWYG editor with audio score playback for results that look and sound beautiful, rivaling commercial offerings like Finale and Sibelius. . This package provides MuseScore 3. You can install multiple versions of MuseScore in parallel, and upstream recommends doing so, because each major version has a new, incompatible, layout engine, and changing old scores without relayouting them fully with the new version can only be done by the old version. For MuseScore 2, install the musescore package, and expect a musescore4 package to show up in Debian bookworm. . Create, play back and print sheet music for free. Features include: - easy-to-use and customisable interface - optional dark theme (to focus on the score) - tours for first-time and returning users - albums combining multiple scores - unlimited score length - unlimited number of staves per system - up to four independent voices per staff - score creation wizard and templates - easy and fast note entry with a (PC) keyboard, the mouse, including an on-screen virtual (piano) keyboard, or MIDI (step-time, real-time) - timewise input (moving subsequent notes/rests), also for unmetered music - half-time and double-time paste commands for copy/paste - continuous view: focus on the content, scrolling by as an endless ribbon, undistracted by line breaks or page breaks; switch to page view to polish up for printing - timeline view - automatic part extraction (by staves or voices) and transposition - advanced transposition: transpose a selected passage to any key, or by any interval — or even transpose diatonically within the same key - repeats, including segnos, codas, measure repeats, advanced repeats; linearisation command to expand repeats - dynamics, articulations and other expression markings - playback support for almost all notation elements - custom text markings - style rules that apply to the whole score at once - automatic placement system (smart layout), now even more flexible - lyrics - chord symbols - Jazz notation, including lead sheets and slash notation - swing and shuffle playback - integrated sequencer and two software synthesisers (FluidSynth for SF2/SF3, Zerberus for SFZ), which also can use third-party soundfonts - single-note dynamics - mixer for instrument levels and effects - mixing and panning for individual parts - percussion notation - sticking (“fingering” for drummers) - early music notation - cross-staff beaming - import of graphics - custom key signatures - additive time signatures - system dividers - user-defined score styles - cutaway staves - pianoroll editor, edit playback parameters of each note individually - score comparison tool - and much more… . Choir features: - powerful lyrics copy and paste tools - implode/explode: combine up to four voices on one staff, then separate to individual staves - hide empty vocal staves, such as in a piano intro - figured bass for historical notation - smart lyrics: unlimited verses, with notes and staves automatically spaced, and verse numbers automatically aligned - voice leading checker: download the Check Harmony Rules proofreading plugin to check for errors in your part writing, according to standard rules - part mixer: mute, solo, or change volume of staves to learn individual lines — settings even apply to MP3 export . Piano features: - support for solo + piano (add small staff with different instrument) - support for cadenzas (smaller notes and variable length measures) - complete notation: pedaling, fingering, cross-staff beaming — you name it; everything needed to write piano sheet music is here . Guitar features: - bends, fingerings, and other common guitar notations supported - add/remove linked staves any time; enter notes on either standard (pitched five-line) or TAB staff - percussion/drumset also included - templates include guitar, tablature, guitar+tablature, rock/pop band - complete tablature: multiple tab styles available — from note symbols outside the staff to upside-down strings — and linked standard/tab staff pairs - Guitar Pro import: MuseScore can now open files from Guitar Pro, so you can easily migrate over. Import filters are improving with every release; GP3, GP4, GP5, GP6, GTP, GPX are currently supported. - Fretboard diagrams: 21 default chords for every key, and a powerful editor to create your own — with barre, fret position, and any number of strings - multiple or differently shaped dots per string; partial and multiple barres; ability to not show nut; customisable string/fret distance; chord symbols for diagrams and saving those to the palette; etc. - beyond guitar: banjo, mandolin, ukulele, oud; custom string tunings; even historical lute tablature: MuseScore does them all. . Orchestral features: - templates for common instrumentations - custom linked parts (e.g. create choral score from orchestra+chorus): any change you make to the content of any part is immediately reflected in the full score — and vice versa - powerful style controls: edit the formatting of parts and score independently — or apply the same style to all parts with one click - one-click transposition: instantly switch between transposed and concert pitch: sounding pitches stay the same while the written notes change . Jazz features: - templates for Jazz Lead Sheet, Big Band and Jazz Combo - real “handwritten” Book-style jazz font for text and chord symbols - formatting tools include adding line breaks every X measures - instantly switch between transposed and concert pitch - intelligent chord symbol: chord names are automatically formatted when you finish typing — plus, they transpose with the notes - easy slashes: commands to fill bars with slashes — and to turn notes into rhythmic slashes, and even accent notation above the staff . Marching ensembles features (needs the MDL extension): - marching band, indoor percussion, front ensemble, drumline and drum corps (even G bugles); no setup or configuration — select a template, start writing . Band features: - diverse templates: concert band, brass band, marching band, battery and pit percussion — ready out-of-the-box (plus big band for jazz) - custom linked parts: you can even keep a drumline score linked to a full marching band score and to individual percussion parts . Most elements in MuseScore are laid out automatically on a “virtual note sheet”, with a near professional-quality layout engine, but can also be positioned manually, giving you total control of every score element’s position. The capabilities of MuseScore can be extended via plugins and extensions, and the growing repository on musescore.org contains many plugins submitted by users and an active development team. . MuseScore includes a set of sounds that reproduce common instruments (as defined by General MIDI) without taking up a lot of disk space or memory providing full orchestral and band sounds (with the Drumline extension installed this includes marching percussion). The general (non-Drumline) sound font is available as musescore-general-soundfont Debian package, if you wish to reuse it with other synthesisers.) You can also load any sound font you prefer for a wider variety of sounds or for more realism. . MuseScore can import and export MIDI and MusicXML files, and it can also import from Capella and several other programs. MuseScore can export to PDF, PNG, and other graphic formats, to WAV and other audio formats such as OGG Vorbis and MP3, or to GNU Lilypond for an alternative layout and print option. . MuseScore can upload scores to musescore.com, a score sharing site, and send scrolling sheet music videos to YouTube. In addition to the desktop software, you can rehearse “on the go” with MuseScore mobile apps (which do not support note entry, but many advanced playback functions). Note that all of these are commercial or otherwise non-free offers optionally integrated with, but not part of, the Free notation program. Scrolling video scores feature the notes highlighted in the score as they sound — and highlighted on a virtual piano keyboard below.
PackageMaintainer	Thorsten Glaser <tg@mirbsd.de>
PackageName	musescore3
PackageSection	sound
PackageVersion	3.2.3+dfsg2-11~bpo10+1
SHA-1	3526704C8ECFE1D39ED8A683B60E41B4FCEBF166
SHA-256	5EAC69A8DC1414929819EFDA4F5B8AF1653AF5E26E7F69BB5DB4A6FF6BD78ECE

Key	Value
FileSize	6745824
MD5	C01251E07460F7B5E049D3F15CB2B85E
PackageDescription	cross-platform multi-lingual music composition and notation, v3 MuseScore is an Open Source (GNU GPL) music notation software that runs on all platforms supported by Qt5 (GNU/Linux, MacOS X, Windows), and is available in over forty different languages. It features an easy to use WYSIWYG editor with audio score playback for results that look and sound beautiful, rivaling commercial offerings like Finale and Sibelius. . This package provides MuseScore 3. You can install multiple versions of MuseScore in parallel, and upstream recommends doing so, because each major version has a new, incompatible, layout engine, and changing old scores without relayouting them fully with the new version can only be done by the old version. For MuseScore 2, install the musescore package, and expect a musescore4 package to show up in Debian bookworm. . Create, play back and print sheet music for free. Features include: - easy-to-use and customisable interface - optional dark theme (to focus on the score) - tours for first-time and returning users - albums combining multiple scores - unlimited score length - unlimited number of staves per system - up to four independent voices per staff - score creation wizard and templates - easy and fast note entry with a (PC) keyboard, the mouse, including an on-screen virtual (piano) keyboard, or MIDI (step-time, real-time) - timewise input (moving subsequent notes/rests), also for unmetered music - half-time and double-time paste commands for copy/paste - continuous view: focus on the content, scrolling by as an endless ribbon, undistracted by line breaks or page breaks; switch to page view to polish up for printing - timeline view - automatic part extraction (by staves or voices) and transposition - advanced transposition: transpose a selected passage to any key, or by any interval — or even transpose diatonically within the same key - repeats, including segnos, codas, measure repeats, advanced repeats; linearisation command to expand repeats - dynamics, articulations and other expression markings - playback support for almost all notation elements - custom text markings - style rules that apply to the whole score at once - automatic placement system (smart layout), now even more flexible - lyrics - chord symbols - Jazz notation, including lead sheets and slash notation - swing and shuffle playback - integrated sequencer and two software synthesisers (FluidSynth for SF2/SF3, Zerberus for SFZ), which also can use third-party soundfonts - single-note dynamics - mixer for instrument levels and effects - mixing and panning for individual parts - percussion notation - sticking (“fingering” for drummers) - early music notation - cross-staff beaming - import of graphics - custom key signatures - additive time signatures - system dividers - user-defined score styles - cutaway staves - pianoroll editor, edit playback parameters of each note individually - score comparison tool - and much more… . Choir features: - powerful lyrics copy and paste tools - implode/explode: combine up to four voices on one staff, then separate to individual staves - hide empty vocal staves, such as in a piano intro - figured bass for historical notation - smart lyrics: unlimited verses, with notes and staves automatically spaced, and verse numbers automatically aligned - voice leading checker: download the Check Harmony Rules proofreading plugin to check for errors in your part writing, according to standard rules - part mixer: mute, solo, or change volume of staves to learn individual lines — settings even apply to MP3 export . Piano features: - support for solo + piano (add small staff with different instrument) - support for cadenzas (smaller notes and variable length measures) - complete notation: pedaling, fingering, cross-staff beaming — you name it; everything needed to write piano sheet music is here . Guitar features: - bends, fingerings, and other common guitar notations supported - add/remove linked staves any time; enter notes on either standard (pitched five-line) or TAB staff - percussion/drumset also included - templates include guitar, tablature, guitar+tablature, rock/pop band - complete tablature: multiple tab styles available — from note symbols outside the staff to upside-down strings — and linked standard/tab staff pairs - Guitar Pro import: MuseScore can now open files from Guitar Pro, so you can easily migrate over. Import filters are improving with every release; GP3, GP4, GP5, GP6, GTP, GPX are currently supported. - Fretboard diagrams: 21 default chords for every key, and a powerful editor to create your own — with barre, fret position, and any number of strings - multiple or differently shaped dots per string; partial and multiple barres; ability to not show nut; customisable string/fret distance; chord symbols for diagrams and saving those to the palette; etc. - beyond guitar: banjo, mandolin, ukulele, oud; custom string tunings; even historical lute tablature: MuseScore does them all. . Orchestral features: - templates for common instrumentations - custom linked parts (e.g. create choral score from orchestra+chorus): any change you make to the content of any part is immediately reflected in the full score — and vice versa - powerful style controls: edit the formatting of parts and score independently — or apply the same style to all parts with one click - one-click transposition: instantly switch between transposed and concert pitch: sounding pitches stay the same while the written notes change . Jazz features: - templates for Jazz Lead Sheet, Big Band and Jazz Combo - real “handwritten” Book-style jazz font for text and chord symbols - formatting tools include adding line breaks every X measures - instantly switch between transposed and concert pitch - intelligent chord symbol: chord names are automatically formatted when you finish typing — plus, they transpose with the notes - easy slashes: commands to fill bars with slashes — and to turn notes into rhythmic slashes, and even accent notation above the staff . Marching ensembles features (needs the MDL extension): - marching band, indoor percussion, front ensemble, drumline and drum corps (even G bugles); no setup or configuration — select a template, start writing . Band features: - diverse templates: concert band, brass band, marching band, battery and pit percussion — ready out-of-the-box (plus big band for jazz) - custom linked parts: you can even keep a drumline score linked to a full marching band score and to individual percussion parts . Most elements in MuseScore are laid out automatically on a “virtual note sheet”, with a near professional-quality layout engine, but can also be positioned manually, giving you total control of every score element’s position. The capabilities of MuseScore can be extended via plugins and extensions, and the growing repository on musescore.org contains many plugins submitted by users and an active development team. . MuseScore includes a set of sounds that reproduce common instruments (as defined by General MIDI) without taking up a lot of disk space or memory providing full orchestral and band sounds (with the Drumline extension installed this includes marching percussion). The general (non-Drumline) sound font is available as musescore-general-soundfont Debian package, if you wish to reuse it with other synthesisers.) You can also load any sound font you prefer for a wider variety of sounds or for more realism. . MuseScore can import and export MIDI and MusicXML files, and it can also import from Capella and several other programs. MuseScore can export to PDF, PNG, and other graphic formats, to WAV and other audio formats such as OGG Vorbis and MP3, or to GNU Lilypond for an alternative layout and print option. . MuseScore can upload scores to musescore.com, a score sharing site, and send scrolling sheet music videos to YouTube. In addition to the desktop software, you can rehearse “on the go” with MuseScore mobile apps (which do not support note entry, but many advanced playback functions). Note that all of these are commercial or otherwise non-free offers optionally integrated with, but not part of, the Free notation program. Scrolling video scores feature the notes highlighted in the score as they sound — and highlighted on a virtual piano keyboard below.
PackageMaintainer	Thorsten Glaser <tg@mirbsd.de>
PackageName	musescore3
PackageSection	sound
PackageVersion	3.2.3+dfsg2-11~bpo10+1
SHA-1	8EA16E3FF271F97213048570E42D98336318F33C
SHA-256	055B7AD26A37E0A2C7DED5C3711F7B8244B3F17A1B130041CFB9F79B16696641

Key	Value
FileSize	8027620
MD5	F97E06B626A6C3E2B8A5E837B78A0C3A
PackageDescription	cross-platform multi-lingual music composition and notation, v3 MuseScore is an Open Source (GNU GPL) music notation software that runs on all platforms supported by Qt5 (GNU/Linux, MacOS X, Windows), and is available in over forty different languages. It features an easy to use WYSIWYG editor with audio score playback for results that look and sound beautiful, rivaling commercial offerings like Finale and Sibelius. . This package provides MuseScore 3. You can install multiple versions of MuseScore in parallel, and upstream recommends doing so, because each major version has a new, incompatible, layout engine, and changing old scores without relayouting them fully with the new version can only be done by the old version. For MuseScore 2, install the musescore package, and expect a musescore4 package to show up in Debian bookworm. . Create, play back and print sheet music for free. Features include: - easy-to-use and customisable interface - optional dark theme (to focus on the score) - tours for first-time and returning users - albums combining multiple scores - unlimited score length - unlimited number of staves per system - up to four independent voices per staff - score creation wizard and templates - easy and fast note entry with a (PC) keyboard, the mouse, including an on-screen virtual (piano) keyboard, or MIDI (step-time, real-time) - timewise input (moving subsequent notes/rests), also for unmetered music - half-time and double-time paste commands for copy/paste - continuous view: focus on the content, scrolling by as an endless ribbon, undistracted by line breaks or page breaks; switch to page view to polish up for printing - timeline view - automatic part extraction (by staves or voices) and transposition - advanced transposition: transpose a selected passage to any key, or by any interval — or even transpose diatonically within the same key - repeats, including segnos, codas, measure repeats, advanced repeats; linearisation command to expand repeats - dynamics, articulations and other expression markings - playback support for almost all notation elements - custom text markings - style rules that apply to the whole score at once - automatic placement system (smart layout), now even more flexible - lyrics - chord symbols - Jazz notation, including lead sheets and slash notation - swing and shuffle playback - integrated sequencer and two software synthesisers (FluidSynth for SF2/SF3, Zerberus for SFZ), which also can use third-party soundfonts - single-note dynamics - mixer for instrument levels and effects - mixing and panning for individual parts - percussion notation - sticking (“fingering” for drummers) - early music notation - cross-staff beaming - import of graphics - custom key signatures - additive time signatures - system dividers - user-defined score styles - cutaway staves - pianoroll editor, edit playback parameters of each note individually - score comparison tool - and much more… . Choir features: - powerful lyrics copy and paste tools - implode/explode: combine up to four voices on one staff, then separate to individual staves - hide empty vocal staves, such as in a piano intro - figured bass for historical notation - smart lyrics: unlimited verses, with notes and staves automatically spaced, and verse numbers automatically aligned - voice leading checker: download the Check Harmony Rules proofreading plugin to check for errors in your part writing, according to standard rules - part mixer: mute, solo, or change volume of staves to learn individual lines — settings even apply to MP3 export . Piano features: - support for solo + piano (add small staff with different instrument) - support for cadenzas (smaller notes and variable length measures) - complete notation: pedaling, fingering, cross-staff beaming — you name it; everything needed to write piano sheet music is here . Guitar features: - bends, fingerings, and other common guitar notations supported - add/remove linked staves any time; enter notes on either standard (pitched five-line) or TAB staff - percussion/drumset also included - templates include guitar, tablature, guitar+tablature, rock/pop band - complete tablature: multiple tab styles available — from note symbols outside the staff to upside-down strings — and linked standard/tab staff pairs - Guitar Pro import: MuseScore can now open files from Guitar Pro, so you can easily migrate over. Import filters are improving with every release; GP3, GP4, GP5, GP6, GTP, GPX are currently supported. - Fretboard diagrams: 21 default chords for every key, and a powerful editor to create your own — with barre, fret position, and any number of strings - multiple or differently shaped dots per string; partial and multiple barres; ability to not show nut; customisable string/fret distance; chord symbols for diagrams and saving those to the palette; etc. - beyond guitar: banjo, mandolin, ukulele, oud; custom string tunings; even historical lute tablature: MuseScore does them all. . Orchestral features: - templates for common instrumentations - custom linked parts (e.g. create choral score from orchestra+chorus): any change you make to the content of any part is immediately reflected in the full score — and vice versa - powerful style controls: edit the formatting of parts and score independently — or apply the same style to all parts with one click - one-click transposition: instantly switch between transposed and concert pitch: sounding pitches stay the same while the written notes change . Jazz features: - templates for Jazz Lead Sheet, Big Band and Jazz Combo - real “handwritten” Book-style jazz font for text and chord symbols - formatting tools include adding line breaks every X measures - instantly switch between transposed and concert pitch - intelligent chord symbol: chord names are automatically formatted when you finish typing — plus, they transpose with the notes - easy slashes: commands to fill bars with slashes — and to turn notes into rhythmic slashes, and even accent notation above the staff . Marching ensembles features (needs the MDL extension): - marching band, indoor percussion, front ensemble, drumline and drum corps (even G bugles); no setup or configuration — select a template, start writing . Band features: - diverse templates: concert band, brass band, marching band, battery and pit percussion — ready out-of-the-box (plus big band for jazz) - custom linked parts: you can even keep a drumline score linked to a full marching band score and to individual percussion parts . Most elements in MuseScore are laid out automatically on a “virtual note sheet”, with a near professional-quality layout engine, but can also be positioned manually, giving you total control of every score element’s position. The capabilities of MuseScore can be extended via plugins and extensions, and the growing repository on musescore.org contains many plugins submitted by users and an active development team. . MuseScore includes a set of sounds that reproduce common instruments (as defined by General MIDI) without taking up a lot of disk space or memory providing full orchestral and band sounds (with the Drumline extension installed this includes marching percussion). The general (non-Drumline) sound font is available as musescore-general-soundfont Debian package, if you wish to reuse it with other synthesisers.) You can also load any sound font you prefer for a wider variety of sounds or for more realism. . MuseScore can import and export MIDI and MusicXML files, and it can also import from Capella and several other programs. MuseScore can export to PDF, PNG, and other graphic formats, to WAV and other audio formats such as OGG Vorbis and MP3, or to GNU Lilypond for an alternative layout and print option. . MuseScore can upload scores to musescore.com, a score sharing site, and send scrolling sheet music videos to YouTube. In addition to the desktop software, you can rehearse “on the go” with MuseScore mobile apps (which do not support note entry, but many advanced playback functions). Note that all of these are commercial or otherwise non-free offers optionally integrated with, but not part of, the Free notation program. Scrolling video scores feature the notes highlighted in the score as they sound — and highlighted on a virtual piano keyboard below.
PackageMaintainer	Thorsten Glaser <tg@mirbsd.de>
PackageName	musescore3
PackageSection	sound
PackageVersion	3.2.3+dfsg2-11~bpo10+1
SHA-1	AD4C3F37DB59CD534A5A6EE04D0E1CF4ECF0BB08
SHA-256	C219F788EBC764B9F0B419EFC0AFCDD9C5D90DB92518538C22DA7AF38853B4D3

Key	Value
FileSize	7015768
MD5	446EFB4AD1FAB06E6D0CACBB12E57F85
PackageDescription	cross-platform multi-lingual music composition and notation, v3 MuseScore is an Open Source (GNU GPL) music notation software that runs on all platforms supported by Qt5 (GNU/Linux, MacOS X, Windows), and is available in over forty different languages. It features an easy to use WYSIWYG editor with audio score playback for results that look and sound beautiful, rivaling commercial offerings like Finale and Sibelius. . This package provides MuseScore 3. You can install multiple versions of MuseScore in parallel, and upstream recommends doing so, because each major version has a new, incompatible, layout engine, and changing old scores without relayouting them fully with the new version can only be done by the old version. For MuseScore 2, install the musescore package, and expect a musescore4 package to show up in Debian bookworm. . Create, play back and print sheet music for free. Features include: - easy-to-use and customisable interface - optional dark theme (to focus on the score) - tours for first-time and returning users - albums combining multiple scores - unlimited score length - unlimited number of staves per system - up to four independent voices per staff - score creation wizard and templates - easy and fast note entry with a (PC) keyboard, the mouse, including an on-screen virtual (piano) keyboard, or MIDI (step-time, real-time) - timewise input (moving subsequent notes/rests), also for unmetered music - half-time and double-time paste commands for copy/paste - continuous view: focus on the content, scrolling by as an endless ribbon, undistracted by line breaks or page breaks; switch to page view to polish up for printing - timeline view - automatic part extraction (by staves or voices) and transposition - advanced transposition: transpose a selected passage to any key, or by any interval — or even transpose diatonically within the same key - repeats, including segnos, codas, measure repeats, advanced repeats; linearisation command to expand repeats - dynamics, articulations and other expression markings - playback support for almost all notation elements - custom text markings - style rules that apply to the whole score at once - automatic placement system (smart layout), now even more flexible - lyrics - chord symbols - Jazz notation, including lead sheets and slash notation - swing and shuffle playback - integrated sequencer and two software synthesisers (FluidSynth for SF2/SF3, Zerberus for SFZ), which also can use third-party soundfonts - single-note dynamics - mixer for instrument levels and effects - mixing and panning for individual parts - percussion notation - sticking (“fingering” for drummers) - early music notation - cross-staff beaming - import of graphics - custom key signatures - additive time signatures - system dividers - user-defined score styles - cutaway staves - pianoroll editor, edit playback parameters of each note individually - score comparison tool - and much more… . Choir features: - powerful lyrics copy and paste tools - implode/explode: combine up to four voices on one staff, then separate to individual staves - hide empty vocal staves, such as in a piano intro - figured bass for historical notation - smart lyrics: unlimited verses, with notes and staves automatically spaced, and verse numbers automatically aligned - voice leading checker: download the Check Harmony Rules proofreading plugin to check for errors in your part writing, according to standard rules - part mixer: mute, solo, or change volume of staves to learn individual lines — settings even apply to MP3 export . Piano features: - support for solo + piano (add small staff with different instrument) - support for cadenzas (smaller notes and variable length measures) - complete notation: pedaling, fingering, cross-staff beaming — you name it; everything needed to write piano sheet music is here . Guitar features: - bends, fingerings, and other common guitar notations supported - add/remove linked staves any time; enter notes on either standard (pitched five-line) or TAB staff - percussion/drumset also included - templates include guitar, tablature, guitar+tablature, rock/pop band - complete tablature: multiple tab styles available — from note symbols outside the staff to upside-down strings — and linked standard/tab staff pairs - Guitar Pro import: MuseScore can now open files from Guitar Pro, so you can easily migrate over. Import filters are improving with every release; GP3, GP4, GP5, GP6, GTP, GPX are currently supported. - Fretboard diagrams: 21 default chords for every key, and a powerful editor to create your own — with barre, fret position, and any number of strings - multiple or differently shaped dots per string; partial and multiple barres; ability to not show nut; customisable string/fret distance; chord symbols for diagrams and saving those to the palette; etc. - beyond guitar: banjo, mandolin, ukulele, oud; custom string tunings; even historical lute tablature: MuseScore does them all. . Orchestral features: - templates for common instrumentations - custom linked parts (e.g. create choral score from orchestra+chorus): any change you make to the content of any part is immediately reflected in the full score — and vice versa - powerful style controls: edit the formatting of parts and score independently — or apply the same style to all parts with one click - one-click transposition: instantly switch between transposed and concert pitch: sounding pitches stay the same while the written notes change . Jazz features: - templates for Jazz Lead Sheet, Big Band and Jazz Combo - real “handwritten” Book-style jazz font for text and chord symbols - formatting tools include adding line breaks every X measures - instantly switch between transposed and concert pitch - intelligent chord symbol: chord names are automatically formatted when you finish typing — plus, they transpose with the notes - easy slashes: commands to fill bars with slashes — and to turn notes into rhythmic slashes, and even accent notation above the staff . Marching ensembles features (needs the MDL extension): - marching band, indoor percussion, front ensemble, drumline and drum corps (even G bugles); no setup or configuration — select a template, start writing . Band features: - diverse templates: concert band, brass band, marching band, battery and pit percussion — ready out-of-the-box (plus big band for jazz) - custom linked parts: you can even keep a drumline score linked to a full marching band score and to individual percussion parts . Most elements in MuseScore are laid out automatically on a “virtual note sheet”, with a near professional-quality layout engine, but can also be positioned manually, giving you total control of every score element’s position. The capabilities of MuseScore can be extended via plugins and extensions, and the growing repository on musescore.org contains many plugins submitted by users and an active development team. . MuseScore includes a set of sounds that reproduce common instruments (as defined by General MIDI) without taking up a lot of disk space or memory providing full orchestral and band sounds (with the Drumline extension installed this includes marching percussion). The general (non-Drumline) sound font is available as musescore-general-soundfont Debian package, if you wish to reuse it with other synthesisers.) You can also load any sound font you prefer for a wider variety of sounds or for more realism. . MuseScore can import and export MIDI and MusicXML files, and it can also import from Capella and several other programs. MuseScore can export to PDF, PNG, and other graphic formats, to WAV and other audio formats such as OGG Vorbis and MP3, or to GNU Lilypond for an alternative layout and print option. . MuseScore can upload scores to musescore.com, a score sharing site, and send scrolling sheet music videos to YouTube. In addition to the desktop software, you can rehearse “on the go” with MuseScore mobile apps (which do not support note entry, but many advanced playback functions). Note that all of these are commercial or otherwise non-free offers optionally integrated with, but not part of, the Free notation program. Scrolling video scores feature the notes highlighted in the score as they sound — and highlighted on a virtual piano keyboard below.
PackageMaintainer	Thorsten Glaser <tg@mirbsd.de>
PackageName	musescore3
PackageSection	sound
PackageVersion	3.2.3+dfsg2-11~bpo10+1
SHA-1	1E368DA627537736D04F1DE1915CA85F92B51FEB
SHA-256	5FE72586F64C196327358B610D6174C48ED5DFD47450CAB03C593160C2C217CA

Key	Value
FileSize	7450000
MD5	66FE59FAE97EF86D5AF6431C1CACFA2A
PackageDescription	cross-platform multi-lingual music composition and notation, v3 MuseScore is an Open Source (GNU GPL) music notation software that runs on all platforms supported by Qt5 (GNU/Linux, MacOS X, Windows), and is available in over forty different languages. It features an easy to use WYSIWYG editor with audio score playback for results that look and sound beautiful, rivaling commercial offerings like Finale and Sibelius. . This package provides MuseScore 3. You can install multiple versions of MuseScore in parallel, and upstream recommends doing so, because each major version has a new, incompatible, layout engine, and changing old scores without relayouting them fully with the new version can only be done by the old version. For MuseScore 2, install the musescore package, and expect a musescore4 package to show up in Debian bookworm. . Create, play back and print sheet music for free. Features include: - easy-to-use and customisable interface - optional dark theme (to focus on the score) - tours for first-time and returning users - albums combining multiple scores - unlimited score length - unlimited number of staves per system - up to four independent voices per staff - score creation wizard and templates - easy and fast note entry with a (PC) keyboard, the mouse, including an on-screen virtual (piano) keyboard, or MIDI (step-time, real-time) - timewise input (moving subsequent notes/rests), also for unmetered music - half-time and double-time paste commands for copy/paste - continuous view: focus on the content, scrolling by as an endless ribbon, undistracted by line breaks or page breaks; switch to page view to polish up for printing - timeline view - automatic part extraction (by staves or voices) and transposition - advanced transposition: transpose a selected passage to any key, or by any interval — or even transpose diatonically within the same key - repeats, including segnos, codas, measure repeats, advanced repeats; linearisation command to expand repeats - dynamics, articulations and other expression markings - playback support for almost all notation elements - custom text markings - style rules that apply to the whole score at once - automatic placement system (smart layout), now even more flexible - lyrics - chord symbols - Jazz notation, including lead sheets and slash notation - swing and shuffle playback - integrated sequencer and two software synthesisers (FluidSynth for SF2/SF3, Zerberus for SFZ), which also can use third-party soundfonts - single-note dynamics - mixer for instrument levels and effects - mixing and panning for individual parts - percussion notation - sticking (“fingering” for drummers) - early music notation - cross-staff beaming - import of graphics - custom key signatures - additive time signatures - system dividers - user-defined score styles - cutaway staves - pianoroll editor, edit playback parameters of each note individually - score comparison tool - and much more… . Choir features: - powerful lyrics copy and paste tools - implode/explode: combine up to four voices on one staff, then separate to individual staves - hide empty vocal staves, such as in a piano intro - figured bass for historical notation - smart lyrics: unlimited verses, with notes and staves automatically spaced, and verse numbers automatically aligned - voice leading checker: download the Check Harmony Rules proofreading plugin to check for errors in your part writing, according to standard rules - part mixer: mute, solo, or change volume of staves to learn individual lines — settings even apply to MP3 export . Piano features: - support for solo + piano (add small staff with different instrument) - support for cadenzas (smaller notes and variable length measures) - complete notation: pedaling, fingering, cross-staff beaming — you name it; everything needed to write piano sheet music is here . Guitar features: - bends, fingerings, and other common guitar notations supported - add/remove linked staves any time; enter notes on either standard (pitched five-line) or TAB staff - percussion/drumset also included - templates include guitar, tablature, guitar+tablature, rock/pop band - complete tablature: multiple tab styles available — from note symbols outside the staff to upside-down strings — and linked standard/tab staff pairs - Guitar Pro import: MuseScore can now open files from Guitar Pro, so you can easily migrate over. Import filters are improving with every release; GP3, GP4, GP5, GP6, GTP, GPX are currently supported. - Fretboard diagrams: 21 default chords for every key, and a powerful editor to create your own — with barre, fret position, and any number of strings - multiple or differently shaped dots per string; partial and multiple barres; ability to not show nut; customisable string/fret distance; chord symbols for diagrams and saving those to the palette; etc. - beyond guitar: banjo, mandolin, ukulele, oud; custom string tunings; even historical lute tablature: MuseScore does them all. . Orchestral features: - templates for common instrumentations - custom linked parts (e.g. create choral score from orchestra+chorus): any change you make to the content of any part is immediately reflected in the full score — and vice versa - powerful style controls: edit the formatting of parts and score independently — or apply the same style to all parts with one click - one-click transposition: instantly switch between transposed and concert pitch: sounding pitches stay the same while the written notes change . Jazz features: - templates for Jazz Lead Sheet, Big Band and Jazz Combo - real “handwritten” Book-style jazz font for text and chord symbols - formatting tools include adding line breaks every X measures - instantly switch between transposed and concert pitch - intelligent chord symbol: chord names are automatically formatted when you finish typing — plus, they transpose with the notes - easy slashes: commands to fill bars with slashes — and to turn notes into rhythmic slashes, and even accent notation above the staff . Marching ensembles features (needs the MDL extension): - marching band, indoor percussion, front ensemble, drumline and drum corps (even G bugles); no setup or configuration — select a template, start writing . Band features: - diverse templates: concert band, brass band, marching band, battery and pit percussion — ready out-of-the-box (plus big band for jazz) - custom linked parts: you can even keep a drumline score linked to a full marching band score and to individual percussion parts . Most elements in MuseScore are laid out automatically on a “virtual note sheet”, with a near professional-quality layout engine, but can also be positioned manually, giving you total control of every score element’s position. The capabilities of MuseScore can be extended via plugins and extensions, and the growing repository on musescore.org contains many plugins submitted by users and an active development team. . MuseScore includes a set of sounds that reproduce common instruments (as defined by General MIDI) without taking up a lot of disk space or memory providing full orchestral and band sounds (with the Drumline extension installed this includes marching percussion). The general (non-Drumline) sound font is available as musescore-general-soundfont Debian package, if you wish to reuse it with other synthesisers.) You can also load any sound font you prefer for a wider variety of sounds or for more realism. . MuseScore can import and export MIDI and MusicXML files, and it can also import from Capella and several other programs. MuseScore can export to PDF, PNG, and other graphic formats, to WAV and other audio formats such as OGG Vorbis and MP3, or to GNU Lilypond for an alternative layout and print option. . MuseScore can upload scores to musescore.com, a score sharing site, and send scrolling sheet music videos to YouTube. In addition to the desktop software, you can rehearse “on the go” with MuseScore mobile apps (which do not support note entry, but many advanced playback functions). Note that all of these are commercial or otherwise non-free offers optionally integrated with, but not part of, the Free notation program. Scrolling video scores feature the notes highlighted in the score as they sound — and highlighted on a virtual piano keyboard below.
PackageMaintainer	Thorsten Glaser <tg@mirbsd.de>
PackageName	musescore3
PackageSection	sound
PackageVersion	3.2.3+dfsg2-11~bpo10+1
SHA-1	6CB540BA3810D53545275285EDD77880B3B84A0E
SHA-256	3E13BF70506E8CAA481BE96CC33F4396F43DA851EF0ACCBED03BBAD44C5CE637

Key	Value
FileSize	7522656
MD5	98B0AB3F919ECD2565E1644482FE4BA3
PackageDescription	cross-platform multi-lingual music composition and notation, v3 MuseScore is an Open Source (GNU GPL) music notation software that runs on all platforms supported by Qt5 (GNU/Linux, MacOS X, Windows), and is available in over forty different languages. It features an easy to use WYSIWYG editor with audio score playback for results that look and sound beautiful, rivaling commercial offerings like Finale and Sibelius. . This package provides MuseScore 3. You can install multiple versions of MuseScore in parallel, and upstream recommends doing so, because each major version has a new, incompatible, layout engine, and changing old scores without relayouting them fully with the new version can only be done by the old version. For MuseScore 2, install the musescore package, and expect a musescore4 package to show up in Debian bookworm. . Create, play back and print sheet music for free. Features include: - easy-to-use and customisable interface - optional dark theme (to focus on the score) - tours for first-time and returning users - albums combining multiple scores - unlimited score length - unlimited number of staves per system - up to four independent voices per staff - score creation wizard and templates - easy and fast note entry with a (PC) keyboard, the mouse, including an on-screen virtual (piano) keyboard, or MIDI (step-time, real-time) - timewise input (moving subsequent notes/rests), also for unmetered music - half-time and double-time paste commands for copy/paste - continuous view: focus on the content, scrolling by as an endless ribbon, undistracted by line breaks or page breaks; switch to page view to polish up for printing - timeline view - automatic part extraction (by staves or voices) and transposition - advanced transposition: transpose a selected passage to any key, or by any interval — or even transpose diatonically within the same key - repeats, including segnos, codas, measure repeats, advanced repeats; linearisation command to expand repeats - dynamics, articulations and other expression markings - playback support for almost all notation elements - custom text markings - style rules that apply to the whole score at once - automatic placement system (smart layout), now even more flexible - lyrics - chord symbols - Jazz notation, including lead sheets and slash notation - swing and shuffle playback - integrated sequencer and two software synthesisers (FluidSynth for SF2/SF3, Zerberus for SFZ), which also can use third-party soundfonts - single-note dynamics - mixer for instrument levels and effects - mixing and panning for individual parts - percussion notation - sticking (“fingering” for drummers) - early music notation - cross-staff beaming - import of graphics - custom key signatures - additive time signatures - system dividers - user-defined score styles - cutaway staves - pianoroll editor, edit playback parameters of each note individually - score comparison tool - and much more… . Choir features: - powerful lyrics copy and paste tools - implode/explode: combine up to four voices on one staff, then separate to individual staves - hide empty vocal staves, such as in a piano intro - figured bass for historical notation - smart lyrics: unlimited verses, with notes and staves automatically spaced, and verse numbers automatically aligned - voice leading checker: download the Check Harmony Rules proofreading plugin to check for errors in your part writing, according to standard rules - part mixer: mute, solo, or change volume of staves to learn individual lines — settings even apply to MP3 export . Piano features: - support for solo + piano (add small staff with different instrument) - support for cadenzas (smaller notes and variable length measures) - complete notation: pedaling, fingering, cross-staff beaming — you name it; everything needed to write piano sheet music is here . Guitar features: - bends, fingerings, and other common guitar notations supported - add/remove linked staves any time; enter notes on either standard (pitched five-line) or TAB staff - percussion/drumset also included - templates include guitar, tablature, guitar+tablature, rock/pop band - complete tablature: multiple tab styles available — from note symbols outside the staff to upside-down strings — and linked standard/tab staff pairs - Guitar Pro import: MuseScore can now open files from Guitar Pro, so you can easily migrate over. Import filters are improving with every release; GP3, GP4, GP5, GP6, GTP, GPX are currently supported. - Fretboard diagrams: 21 default chords for every key, and a powerful editor to create your own — with barre, fret position, and any number of strings - multiple or differently shaped dots per string; partial and multiple barres; ability to not show nut; customisable string/fret distance; chord symbols for diagrams and saving those to the palette; etc. - beyond guitar: banjo, mandolin, ukulele, oud; custom string tunings; even historical lute tablature: MuseScore does them all. . Orchestral features: - templates for common instrumentations - custom linked parts (e.g. create choral score from orchestra+chorus): any change you make to the content of any part is immediately reflected in the full score — and vice versa - powerful style controls: edit the formatting of parts and score independently — or apply the same style to all parts with one click - one-click transposition: instantly switch between transposed and concert pitch: sounding pitches stay the same while the written notes change . Jazz features: - templates for Jazz Lead Sheet, Big Band and Jazz Combo - real “handwritten” Book-style jazz font for text and chord symbols - formatting tools include adding line breaks every X measures - instantly switch between transposed and concert pitch - intelligent chord symbol: chord names are automatically formatted when you finish typing — plus, they transpose with the notes - easy slashes: commands to fill bars with slashes — and to turn notes into rhythmic slashes, and even accent notation above the staff . Marching ensembles features (needs the MDL extension): - marching band, indoor percussion, front ensemble, drumline and drum corps (even G bugles); no setup or configuration — select a template, start writing . Band features: - diverse templates: concert band, brass band, marching band, battery and pit percussion — ready out-of-the-box (plus big band for jazz) - custom linked parts: you can even keep a drumline score linked to a full marching band score and to individual percussion parts . Most elements in MuseScore are laid out automatically on a “virtual note sheet”, with a near professional-quality layout engine, but can also be positioned manually, giving you total control of every score element’s position. The capabilities of MuseScore can be extended via plugins and extensions, and the growing repository on musescore.org contains many plugins submitted by users and an active development team. . MuseScore includes a set of sounds that reproduce common instruments (as defined by General MIDI) without taking up a lot of disk space or memory providing full orchestral and band sounds (with the Drumline extension installed this includes marching percussion). The general (non-Drumline) sound font is available as musescore-general-soundfont Debian package, if you wish to reuse it with other synthesisers.) You can also load any sound font you prefer for a wider variety of sounds or for more realism. . MuseScore can import and export MIDI and MusicXML files, and it can also import from Capella and several other programs. MuseScore can export to PDF, PNG, and other graphic formats, to WAV and other audio formats such as OGG Vorbis and MP3, or to GNU Lilypond for an alternative layout and print option. . MuseScore can upload scores to musescore.com, a score sharing site, and send scrolling sheet music videos to YouTube. In addition to the desktop software, you can rehearse “on the go” with MuseScore mobile apps (which do not support note entry, but many advanced playback functions). Note that all of these are commercial or otherwise non-free offers optionally integrated with, but not part of, the Free notation program. Scrolling video scores feature the notes highlighted in the score as they sound — and highlighted on a virtual piano keyboard below.
PackageMaintainer	Thorsten Glaser <tg@mirbsd.de>
PackageName	musescore3
PackageSection	sound
PackageVersion	3.2.3+dfsg2-11~bpo10+1
SHA-1	FD6912069B7802E4C486F4A6A294403DF73C7DFF
SHA-256	B62A09A7FADE7FC6871A3A0A7A5A8FCB06475CF8FAE56520FF8242543611CA6E

Key	Value
FileSize	6962848
MD5	D4B0379DD1F0021D34B6A40D66AA2665
PackageDescription	cross-platform multi-lingual music composition and notation, v3 MuseScore is an Open Source (GNU GPL) music notation software that runs on all platforms supported by Qt5 (GNU/Linux, MacOS X, Windows), and is available in over forty different languages. It features an easy to use WYSIWYG editor with audio score playback for results that look and sound beautiful, rivaling commercial offerings like Finale and Sibelius. . This package provides MuseScore 3. You can install multiple versions of MuseScore in parallel, and upstream recommends doing so, because each major version has a new, incompatible, layout engine, and changing old scores without relayouting them fully with the new version can only be done by the old version. For MuseScore 2, install the musescore package, and expect a musescore4 package to show up in Debian bookworm. . Create, play back and print sheet music for free. Features include: - easy-to-use and customisable interface - optional dark theme (to focus on the score) - tours for first-time and returning users - albums combining multiple scores - unlimited score length - unlimited number of staves per system - up to four independent voices per staff - score creation wizard and templates - easy and fast note entry with a (PC) keyboard, the mouse, including an on-screen virtual (piano) keyboard, or MIDI (step-time, real-time) - timewise input (moving subsequent notes/rests), also for unmetered music - half-time and double-time paste commands for copy/paste - continuous view: focus on the content, scrolling by as an endless ribbon, undistracted by line breaks or page breaks; switch to page view to polish up for printing - timeline view - automatic part extraction (by staves or voices) and transposition - advanced transposition: transpose a selected passage to any key, or by any interval — or even transpose diatonically within the same key - repeats, including segnos, codas, measure repeats, advanced repeats; linearisation command to expand repeats - dynamics, articulations and other expression markings - playback support for almost all notation elements - custom text markings - style rules that apply to the whole score at once - automatic placement system (smart layout), now even more flexible - lyrics - chord symbols - Jazz notation, including lead sheets and slash notation - swing and shuffle playback - integrated sequencer and two software synthesisers (FluidSynth for SF2/SF3, Zerberus for SFZ), which also can use third-party soundfonts - single-note dynamics - mixer for instrument levels and effects - mixing and panning for individual parts - percussion notation - sticking (“fingering” for drummers) - early music notation - cross-staff beaming - import of graphics - custom key signatures - additive time signatures - system dividers - user-defined score styles - cutaway staves - pianoroll editor, edit playback parameters of each note individually - score comparison tool - and much more… . Choir features: - powerful lyrics copy and paste tools - implode/explode: combine up to four voices on one staff, then separate to individual staves - hide empty vocal staves, such as in a piano intro - figured bass for historical notation - smart lyrics: unlimited verses, with notes and staves automatically spaced, and verse numbers automatically aligned - voice leading checker: download the Check Harmony Rules proofreading plugin to check for errors in your part writing, according to standard rules - part mixer: mute, solo, or change volume of staves to learn individual lines — settings even apply to MP3 export . Piano features: - support for solo + piano (add small staff with different instrument) - support for cadenzas (smaller notes and variable length measures) - complete notation: pedaling, fingering, cross-staff beaming — you name it; everything needed to write piano sheet music is here . Guitar features: - bends, fingerings, and other common guitar notations supported - add/remove linked staves any time; enter notes on either standard (pitched five-line) or TAB staff - percussion/drumset also included - templates include guitar, tablature, guitar+tablature, rock/pop band - complete tablature: multiple tab styles available — from note symbols outside the staff to upside-down strings — and linked standard/tab staff pairs - Guitar Pro import: MuseScore can now open files from Guitar Pro, so you can easily migrate over. Import filters are improving with every release; GP3, GP4, GP5, GP6, GTP, GPX are currently supported. - Fretboard diagrams: 21 default chords for every key, and a powerful editor to create your own — with barre, fret position, and any number of strings - multiple or differently shaped dots per string; partial and multiple barres; ability to not show nut; customisable string/fret distance; chord symbols for diagrams and saving those to the palette; etc. - beyond guitar: banjo, mandolin, ukulele, oud; custom string tunings; even historical lute tablature: MuseScore does them all. . Orchestral features: - templates for common instrumentations - custom linked parts (e.g. create choral score from orchestra+chorus): any change you make to the content of any part is immediately reflected in the full score — and vice versa - powerful style controls: edit the formatting of parts and score independently — or apply the same style to all parts with one click - one-click transposition: instantly switch between transposed and concert pitch: sounding pitches stay the same while the written notes change . Jazz features: - templates for Jazz Lead Sheet, Big Band and Jazz Combo - real “handwritten” Book-style jazz font for text and chord symbols - formatting tools include adding line breaks every X measures - instantly switch between transposed and concert pitch - intelligent chord symbol: chord names are automatically formatted when you finish typing — plus, they transpose with the notes - easy slashes: commands to fill bars with slashes — and to turn notes into rhythmic slashes, and even accent notation above the staff . Marching ensembles features (needs the MDL extension): - marching band, indoor percussion, front ensemble, drumline and drum corps (even G bugles); no setup or configuration — select a template, start writing . Band features: - diverse templates: concert band, brass band, marching band, battery and pit percussion — ready out-of-the-box (plus big band for jazz) - custom linked parts: you can even keep a drumline score linked to a full marching band score and to individual percussion parts . Most elements in MuseScore are laid out automatically on a “virtual note sheet”, with a near professional-quality layout engine, but can also be positioned manually, giving you total control of every score element’s position. The capabilities of MuseScore can be extended via plugins and extensions, and the growing repository on musescore.org contains many plugins submitted by users and an active development team. . MuseScore includes a set of sounds that reproduce common instruments (as defined by General MIDI) without taking up a lot of disk space or memory providing full orchestral and band sounds (with the Drumline extension installed this includes marching percussion). The general (non-Drumline) sound font is available as musescore-general-soundfont Debian package, if you wish to reuse it with other synthesisers.) You can also load any sound font you prefer for a wider variety of sounds or for more realism. . MuseScore can import and export MIDI and MusicXML files, and it can also import from Capella and several other programs. MuseScore can export to PDF, PNG, and other graphic formats, to WAV and other audio formats such as OGG Vorbis and MP3, or to GNU Lilypond for an alternative layout and print option. . MuseScore can upload scores to musescore.com, a score sharing site, and send scrolling sheet music videos to YouTube. In addition to the desktop software, you can rehearse “on the go” with MuseScore mobile apps (which do not support note entry, but many advanced playback functions). Note that all of these are commercial or otherwise non-free offers optionally integrated with, but not part of, the Free notation program. Scrolling video scores feature the notes highlighted in the score as they sound — and highlighted on a virtual piano keyboard below.
PackageMaintainer	Thorsten Glaser <tg@mirbsd.de>
PackageName	musescore3
PackageSection	sound
PackageVersion	3.2.3+dfsg2-11~bpo10+1
SHA-1	70E8339D09075146CBE74384D5E1A154D596DDE1
SHA-256	48AD00C6C77D43C461CB2E68ABDEB621D3297C0A312A0C4EC9ABE4F37FB2A508

Key	Value
FileSize	6823264
MD5	97BE6A1B17329C13A221D526091BBEA2
PackageDescription	cross-platform multi-lingual music composition and notation, v3 MuseScore is an Open Source (GNU GPL) music notation software that runs on all platforms supported by Qt5 (GNU/Linux, MacOS X, Windows), and is available in over forty different languages. It features an easy to use WYSIWYG editor with audio score playback for results that look and sound beautiful, rivaling commercial offerings like Finale and Sibelius. . This package provides MuseScore 3. You can install multiple versions of MuseScore in parallel, and upstream recommends doing so, because each major version has a new, incompatible, layout engine, and changing old scores without relayouting them fully with the new version can only be done by the old version. For MuseScore 2, install the musescore package, and expect a musescore4 package to show up in Debian bookworm. . Create, play back and print sheet music for free. Features include: - easy-to-use and customisable interface - optional dark theme (to focus on the score) - tours for first-time and returning users - albums combining multiple scores - unlimited score length - unlimited number of staves per system - up to four independent voices per staff - score creation wizard and templates - easy and fast note entry with a (PC) keyboard, the mouse, including an on-screen virtual (piano) keyboard, or MIDI (step-time, real-time) - timewise input (moving subsequent notes/rests), also for unmetered music - half-time and double-time paste commands for copy/paste - continuous view: focus on the content, scrolling by as an endless ribbon, undistracted by line breaks or page breaks; switch to page view to polish up for printing - timeline view - automatic part extraction (by staves or voices) and transposition - advanced transposition: transpose a selected passage to any key, or by any interval — or even transpose diatonically within the same key - repeats, including segnos, codas, measure repeats, advanced repeats; linearisation command to expand repeats - dynamics, articulations and other expression markings - playback support for almost all notation elements - custom text markings - style rules that apply to the whole score at once - automatic placement system (smart layout), now even more flexible - lyrics - chord symbols - Jazz notation, including lead sheets and slash notation - swing and shuffle playback - integrated sequencer and two software synthesisers (FluidSynth for SF2/SF3, Zerberus for SFZ), which also can use third-party soundfonts - single-note dynamics - mixer for instrument levels and effects - mixing and panning for individual parts - percussion notation - sticking (“fingering” for drummers) - early music notation - cross-staff beaming - import of graphics - custom key signatures - additive time signatures - system dividers - user-defined score styles - cutaway staves - pianoroll editor, edit playback parameters of each note individually - score comparison tool - and much more… . Choir features: - powerful lyrics copy and paste tools - implode/explode: combine up to four voices on one staff, then separate to individual staves - hide empty vocal staves, such as in a piano intro - figured bass for historical notation - smart lyrics: unlimited verses, with notes and staves automatically spaced, and verse numbers automatically aligned - voice leading checker: download the Check Harmony Rules proofreading plugin to check for errors in your part writing, according to standard rules - part mixer: mute, solo, or change volume of staves to learn individual lines — settings even apply to MP3 export . Piano features: - support for solo + piano (add small staff with different instrument) - support for cadenzas (smaller notes and variable length measures) - complete notation: pedaling, fingering, cross-staff beaming — you name it; everything needed to write piano sheet music is here . Guitar features: - bends, fingerings, and other common guitar notations supported - add/remove linked staves any time; enter notes on either standard (pitched five-line) or TAB staff - percussion/drumset also included - templates include guitar, tablature, guitar+tablature, rock/pop band - complete tablature: multiple tab styles available — from note symbols outside the staff to upside-down strings — and linked standard/tab staff pairs - Guitar Pro import: MuseScore can now open files from Guitar Pro, so you can easily migrate over. Import filters are improving with every release; GP3, GP4, GP5, GP6, GTP, GPX are currently supported. - Fretboard diagrams: 21 default chords for every key, and a powerful editor to create your own — with barre, fret position, and any number of strings - multiple or differently shaped dots per string; partial and multiple barres; ability to not show nut; customisable string/fret distance; chord symbols for diagrams and saving those to the palette; etc. - beyond guitar: banjo, mandolin, ukulele, oud; custom string tunings; even historical lute tablature: MuseScore does them all. . Orchestral features: - templates for common instrumentations - custom linked parts (e.g. create choral score from orchestra+chorus): any change you make to the content of any part is immediately reflected in the full score — and vice versa - powerful style controls: edit the formatting of parts and score independently — or apply the same style to all parts with one click - one-click transposition: instantly switch between transposed and concert pitch: sounding pitches stay the same while the written notes change . Jazz features: - templates for Jazz Lead Sheet, Big Band and Jazz Combo - real “handwritten” Book-style jazz font for text and chord symbols - formatting tools include adding line breaks every X measures - instantly switch between transposed and concert pitch - intelligent chord symbol: chord names are automatically formatted when you finish typing — plus, they transpose with the notes - easy slashes: commands to fill bars with slashes — and to turn notes into rhythmic slashes, and even accent notation above the staff . Marching ensembles features (needs the MDL extension): - marching band, indoor percussion, front ensemble, drumline and drum corps (even G bugles); no setup or configuration — select a template, start writing . Band features: - diverse templates: concert band, brass band, marching band, battery and pit percussion — ready out-of-the-box (plus big band for jazz) - custom linked parts: you can even keep a drumline score linked to a full marching band score and to individual percussion parts . Most elements in MuseScore are laid out automatically on a “virtual note sheet”, with a near professional-quality layout engine, but can also be positioned manually, giving you total control of every score element’s position. The capabilities of MuseScore can be extended via plugins and extensions, and the growing repository on musescore.org contains many plugins submitted by users and an active development team. . MuseScore includes a set of sounds that reproduce common instruments (as defined by General MIDI) without taking up a lot of disk space or memory providing full orchestral and band sounds (with the Drumline extension installed this includes marching percussion). The general (non-Drumline) sound font is available as musescore-general-soundfont Debian package, if you wish to reuse it with other synthesisers.) You can also load any sound font you prefer for a wider variety of sounds or for more realism. . MuseScore can import and export MIDI and MusicXML files, and it can also import from Capella and several other programs. MuseScore can export to PDF, PNG, and other graphic formats, to WAV and other audio formats such as OGG Vorbis and MP3, or to GNU Lilypond for an alternative layout and print option. . MuseScore can upload scores to musescore.com, a score sharing site, and send scrolling sheet music videos to YouTube. In addition to the desktop software, you can rehearse “on the go” with MuseScore mobile apps (which do not support note entry, but many advanced playback functions). Note that all of these are commercial or otherwise non-free offers optionally integrated with, but not part of, the Free notation program. Scrolling video scores feature the notes highlighted in the score as they sound — and highlighted on a virtual piano keyboard below.
PackageMaintainer	Thorsten Glaser <tg@mirbsd.de>
PackageName	musescore3
PackageSection	sound
PackageVersion	3.2.3+dfsg2-11~bpo10+1
SHA-1	DF17BF953BCE898756D9354A9783737D4D89BAF4
SHA-256	BDD532E475FB320ABD75934928A67FEF4F6038B590951AD36C6019451FAF994E

Key	Value
FileSize	6895476
MD5	83D68AC6E412B66013843FC681942364
PackageDescription	cross-platform multi-lingual music composition and notation, v3 MuseScore is an Open Source (GNU GPL) music notation software that runs on all platforms supported by Qt5 (GNU/Linux, MacOS X, Windows), and is available in over forty different languages. It features an easy to use WYSIWYG editor with audio score playback for results that look and sound beautiful, rivaling commercial offerings like Finale and Sibelius. . This package provides MuseScore 3. You can install multiple versions of MuseScore in parallel, and upstream recommends doing so, because each major version has a new, incompatible, layout engine, and changing old scores without relayouting them fully with the new version can only be done by the old version. For MuseScore 2, install the musescore package, and expect a musescore4 package to show up in Debian bookworm. . Create, play back and print sheet music for free. Features include: - easy-to-use and customisable interface - optional dark theme (to focus on the score) - tours for first-time and returning users - albums combining multiple scores - unlimited score length - unlimited number of staves per system - up to four independent voices per staff - score creation wizard and templates - easy and fast note entry with a (PC) keyboard, the mouse, including an on-screen virtual (piano) keyboard, or MIDI (step-time, real-time) - timewise input (moving subsequent notes/rests), also for unmetered music - half-time and double-time paste commands for copy/paste - continuous view: focus on the content, scrolling by as an endless ribbon, undistracted by line breaks or page breaks; switch to page view to polish up for printing - timeline view - automatic part extraction (by staves or voices) and transposition - advanced transposition: transpose a selected passage to any key, or by any interval — or even transpose diatonically within the same key - repeats, including segnos, codas, measure repeats, advanced repeats; linearisation command to expand repeats - dynamics, articulations and other expression markings - playback support for almost all notation elements - custom text markings - style rules that apply to the whole score at once - automatic placement system (smart layout), now even more flexible - lyrics - chord symbols - Jazz notation, including lead sheets and slash notation - swing and shuffle playback - integrated sequencer and two software synthesisers (FluidSynth for SF2/SF3, Zerberus for SFZ), which also can use third-party soundfonts - single-note dynamics - mixer for instrument levels and effects - mixing and panning for individual parts - percussion notation - sticking (“fingering” for drummers) - early music notation - cross-staff beaming - import of graphics - custom key signatures - additive time signatures - system dividers - user-defined score styles - cutaway staves - pianoroll editor, edit playback parameters of each note individually - score comparison tool - and much more… . Choir features: - powerful lyrics copy and paste tools - implode/explode: combine up to four voices on one staff, then separate to individual staves - hide empty vocal staves, such as in a piano intro - figured bass for historical notation - smart lyrics: unlimited verses, with notes and staves automatically spaced, and verse numbers automatically aligned - voice leading checker: download the Check Harmony Rules proofreading plugin to check for errors in your part writing, according to standard rules - part mixer: mute, solo, or change volume of staves to learn individual lines — settings even apply to MP3 export . Piano features: - support for solo + piano (add small staff with different instrument) - support for cadenzas (smaller notes and variable length measures) - complete notation: pedaling, fingering, cross-staff beaming — you name it; everything needed to write piano sheet music is here . Guitar features: - bends, fingerings, and other common guitar notations supported - add/remove linked staves any time; enter notes on either standard (pitched five-line) or TAB staff - percussion/drumset also included - templates include guitar, tablature, guitar+tablature, rock/pop band - complete tablature: multiple tab styles available — from note symbols outside the staff to upside-down strings — and linked standard/tab staff pairs - Guitar Pro import: MuseScore can now open files from Guitar Pro, so you can easily migrate over. Import filters are improving with every release; GP3, GP4, GP5, GP6, GTP, GPX are currently supported. - Fretboard diagrams: 21 default chords for every key, and a powerful editor to create your own — with barre, fret position, and any number of strings - multiple or differently shaped dots per string; partial and multiple barres; ability to not show nut; customisable string/fret distance; chord symbols for diagrams and saving those to the palette; etc. - beyond guitar: banjo, mandolin, ukulele, oud; custom string tunings; even historical lute tablature: MuseScore does them all. . Orchestral features: - templates for common instrumentations - custom linked parts (e.g. create choral score from orchestra+chorus): any change you make to the content of any part is immediately reflected in the full score — and vice versa - powerful style controls: edit the formatting of parts and score independently — or apply the same style to all parts with one click - one-click transposition: instantly switch between transposed and concert pitch: sounding pitches stay the same while the written notes change . Jazz features: - templates for Jazz Lead Sheet, Big Band and Jazz Combo - real “handwritten” Book-style jazz font for text and chord symbols - formatting tools include adding line breaks every X measures - instantly switch between transposed and concert pitch - intelligent chord symbol: chord names are automatically formatted when you finish typing — plus, they transpose with the notes - easy slashes: commands to fill bars with slashes — and to turn notes into rhythmic slashes, and even accent notation above the staff . Marching ensembles features (needs the MDL extension): - marching band, indoor percussion, front ensemble, drumline and drum corps (even G bugles); no setup or configuration — select a template, start writing . Band features: - diverse templates: concert band, brass band, marching band, battery and pit percussion — ready out-of-the-box (plus big band for jazz) - custom linked parts: you can even keep a drumline score linked to a full marching band score and to individual percussion parts . Most elements in MuseScore are laid out automatically on a “virtual note sheet”, with a near professional-quality layout engine, but can also be positioned manually, giving you total control of every score element’s position. The capabilities of MuseScore can be extended via plugins and extensions, and the growing repository on musescore.org contains many plugins submitted by users and an active development team. . MuseScore includes a set of sounds that reproduce common instruments (as defined by General MIDI) without taking up a lot of disk space or memory providing full orchestral and band sounds (with the Drumline extension installed this includes marching percussion). The general (non-Drumline) sound font is available as musescore-general-soundfont Debian package, if you wish to reuse it with other synthesisers.) You can also load any sound font you prefer for a wider variety of sounds or for more realism. . MuseScore can import and export MIDI and MusicXML files, and it can also import from Capella and several other programs. MuseScore can export to PDF, PNG, and other graphic formats, to WAV and other audio formats such as OGG Vorbis and MP3, or to GNU Lilypond for an alternative layout and print option. . MuseScore can upload scores to musescore.com, a score sharing site, and send scrolling sheet music videos to YouTube. In addition to the desktop software, you can rehearse “on the go” with MuseScore mobile apps (which do not support note entry, but many advanced playback functions). Note that all of these are commercial or otherwise non-free offers optionally integrated with, but not part of, the Free notation program. Scrolling video scores feature the notes highlighted in the score as they sound — and highlighted on a virtual piano keyboard below.
PackageMaintainer	Thorsten Glaser <tg@mirbsd.de>
PackageName	musescore3
PackageSection	sound
PackageVersion	3.2.3+dfsg2-11~bpo10+1
SHA-1	1D6046B8EC0EA3C639F19149B17FCBD66552AD24
SHA-256	EC1DA0FAFB968718CF4C7D6AF4FC31E57E96DA1AFDF46F91068784D8EC95717C