Parents (Total: 18)

The searched file hash is included in 18 parent files which include package known and seen by metalookup. A sample is included below:

Key	Value
MD5	D3C1245DD1D93440E191393F1B96B585
PackageArch	x86_64
PackageDescription	The x3270 program opens a window in the X Window System which emulates the actual look of an IBM 3278/3279 terminal, commonly used with mainframe applications. x3270 also allows you to telnet to an IBM host from the x3270 window. Install the x3270 package if you need to access IBM hosts using an IBM 3278/3279 terminal emulator.
PackageMaintainer	umeabot <umeabot>
PackageName	x3270
PackageRelease	3.mga9
PackageVersion	4.0ga14
SHA-1	06197F31B9972D6533E2DDB06733AB033CCD3216
SHA-256	9953FC112202A74C73F69CBEF16E3A84C677B1E1ECB688049152FBBA812EEA9F

Key	Value
MD5	9A1C87BA81F96C10A6E509F21802727A
PackageArch	x86_64
PackageDescription	This package contains a family of IBM 3270 mainframe terminal emulators: * terminal emulators for interactive use x3270 X Window System c3270 curses based * terminal emulators for scripted use s3270 see the x3270-script man page tcl3270 Tcl based * printer emulator pr3287 * do not miss the punch card puncher emulator x026 x3270 is an IBM 3270 terminal emulator for the X Window System. x3270 runs over a telnet connection (with or without TN3270E) and emulates either an IBM 3279 (color) or 3278 (monochrome). It supports APL2 characters, IND$FILE file transfer, NVT mode, a pop-up keypad for 3270-specific keys, alternative keymaps, 3287 printer sessions, and a scrollbar and has extensive debugging and scripting facilities. x3270a is a script that computes the correct font sizes for higher-resolution displays, then runs x3270. (x3270 handles scaling of visual elements automatically, but it cannot adjust the font sizes by itself.) b3270 is a generic back-end for 3270 emulators. It implements the 3270 protocol and host input/output, and communicates with a front end application using a simple XML-based protocol. c3270 is the curses-based version of x3270. It runs on any dumb terminal (an xterm or a console, for example), and supports (almost) all of the x3270 features. c3270 scripts are compatible with x3270 scripts, and the subset of command line options and resource definitions are also compatible. s3270 is a scripting-only version of x3270. This program is intended primarily for writing "screen-scraping" applications, for example a CGI back-end script that retrieves database information from a mainframe. tcl3270 is a Tcl-based 3270 scripting engine. It lets you write Tcl scripts that manipulate 3270 sessions, and is quite a bit easier to set up and use than s3270. pr3287 is the printer companion for the above tools, and allows printer output from a 3270 session to be directed to a Unix printer queue. x026 is a fun toy which emulates an x026 puncher.
PackageName	x3270
PackageRelease	1098.38
PackageVersion	4.0
SHA-1	1D37FE83308AB70BAC4509426EA91B6EF2D0E213
SHA-256	966C6DBE4B85A440654CFEECF27A8A20ADF4FE15959EF3F1DC75AC59E1EE5423

Key	Value
MD5	406560A3AD4FD3CC17D557D8695AC1B6
PackageArch	x86_64
PackageDescription	This package contains a family of IBM 3270 mainframe terminal emulators: * terminal emulators for interactive use x3270 X Window System c3270 curses based * terminal emulators for scripted use s3270 see the x3270-script man page tcl3270 Tcl based * printer emulator pr3287 * do not miss the punch card puncher emulator x026 x3270 is an IBM 3270 terminal emulator for the X Window System. x3270 runs over a telnet connection (with or without TN3270E) and emulates either an IBM 3279 (color) or 3278 (monochrome). It supports APL2 characters, IND$FILE file transfer, NVT mode, a pop-up keypad for 3270-specific keys, alternative keymaps, 3287 printer sessions, and a scrollbar and has extensive debugging and scripting facilities. x3270a is a script that computes the correct font sizes for higher-resolution displays, then runs x3270. (x3270 handles scaling of visual elements automatically, but it cannot adjust the font sizes by itself.) b3270 is a generic back-end for 3270 emulators. It implements the 3270 protocol and host input/output, and communicates with a front end application using a simple XML-based protocol. c3270 is the curses-based version of x3270. It runs on any dumb terminal (an xterm or a console, for example), and supports (almost) all of the x3270 features. c3270 scripts are compatible with x3270 scripts, and the subset of command line options and resource definitions are also compatible. s3270 is a scripting-only version of x3270. This program is intended primarily for writing "screen-scraping" applications, for example a CGI back-end script that retrieves database information from a mainframe. tcl3270 is a Tcl-based 3270 scripting engine. It lets you write Tcl scripts that manipulate 3270 sessions, and is quite a bit easier to set up and use than s3270. pr3287 is the printer companion for the above tools, and allows printer output from a 3270 session to be directed to a Unix printer queue. x026 is a fun toy which emulates an x026 puncher.
PackageName	x3270
PackageRelease	1098.53
PackageVersion	4.0
SHA-1	244CCE6DBC1F4CA1DD04B92D730334C45ECE8DB6
SHA-256	5219EF2991C5AC497AE8FE31080AD47533E48D396F787C5E72AA065EFF353685

Key	Value
MD5	4B24F64FFB65C2E554A045541DADB33B
PackageArch	i586
PackageDescription	This package contains a family of IBM 3270 mainframe terminal emulators: * terminal emulators for interactive use x3270 X Window System c3270 curses based * terminal emulators for scripted use s3270 see the x3270-script man page tcl3270 Tcl based * printer emulator pr3287 * do not miss the punch card puncher emulator x026 x3270 is an IBM 3270 terminal emulator for the X Window System. x3270 runs over a telnet connection (with or without TN3270E) and emulates either an IBM 3279 (color) or 3278 (monochrome). It supports APL2 characters, IND$FILE file transfer, NVT mode, a pop-up keypad for 3270-specific keys, alternative keymaps, 3287 printer sessions, and a scrollbar and has extensive debugging and scripting facilities. x3270a is a script that computes the correct font sizes for higher-resolution displays, then runs x3270. (x3270 handles scaling of visual elements automatically, but it cannot adjust the font sizes by itself.) b3270 is a generic back-end for 3270 emulators. It implements the 3270 protocol and host input/output, and communicates with a front end application using a simple XML-based protocol. c3270 is the curses-based version of x3270. It runs on any dumb terminal (an xterm or a console, for example), and supports (almost) all of the x3270 features. c3270 scripts are compatible with x3270 scripts, and the subset of command line options and resource definitions are also compatible. s3270 is a scripting-only version of x3270. This program is intended primarily for writing "screen-scraping" applications, for example a CGI back-end script that retrieves database information from a mainframe. tcl3270 is a Tcl-based 3270 scripting engine. It lets you write Tcl scripts that manipulate 3270 sessions, and is quite a bit easier to set up and use than s3270. pr3287 is the printer companion for the above tools, and allows printer output from a 3270 session to be directed to a Unix printer queue. x026 is a fun toy which emulates an x026 puncher.
PackageMaintainer	https://bugs.opensuse.org
PackageName	x3270
PackageRelease	1.3
PackageVersion	4.0
SHA-1	2DE5D7C0FBD0DC06697D9E0D2CF018078CA7A1C4
SHA-256	A5C71CFD2EC17D7036C8BEDAF64B8477ADEEC3FA0EE47F5AD5C1E8B4DC2CD584

Key	Value
MD5	AF71AE31A1574C33440824E5839AB41F
PackageArch	i586
PackageDescription	This package contains a family of IBM 3270 mainframe terminal emulators: * terminal emulators for interactive use x3270 X Window System c3270 curses based * terminal emulators for scripted use s3270 see the x3270-script man page tcl3270 Tcl based * printer emulator pr3287 * do not miss the punch card puncher emulator x026 x3270 is an IBM 3270 terminal emulator for the X Window System. x3270 runs over a telnet connection (with or without TN3270E) and emulates either an IBM 3279 (color) or 3278 (monochrome). It supports APL2 characters, IND$FILE file transfer, NVT mode, a pop-up keypad for 3270-specific keys, alternative keymaps, 3287 printer sessions, and a scrollbar and has extensive debugging and scripting facilities. x3270a is a script that computes the correct font sizes for higher-resolution displays, then runs x3270. (x3270 handles scaling of visual elements automatically, but it cannot adjust the font sizes by itself.) b3270 is a generic back-end for 3270 emulators. It implements the 3270 protocol and host input/output, and communicates with a front end application using a simple XML-based protocol. c3270 is the curses-based version of x3270. It runs on any dumb terminal (an xterm or a console, for example), and supports (almost) all of the x3270 features. c3270 scripts are compatible with x3270 scripts, and the subset of command line options and resource definitions are also compatible. s3270 is a scripting-only version of x3270. This program is intended primarily for writing "screen-scraping" applications, for example a CGI back-end script that retrieves database information from a mainframe. tcl3270 is a Tcl-based 3270 scripting engine. It lets you write Tcl scripts that manipulate 3270 sessions, and is quite a bit easier to set up and use than s3270. pr3287 is the printer companion for the above tools, and allows printer output from a 3270 session to be directed to a Unix printer queue. x026 is a fun toy which emulates an x026 puncher.
PackageName	x3270
PackageRelease	1098.53
PackageVersion	4.0
SHA-1	549046707F87048764D761105525A05782FE06E5
SHA-256	7E79E702D82A113166D4C20DE17BF60BBABCC92CAE8775D882CFD7348D9B4F82

Key	Value
MD5	8F18E59EF28B39452585C24159E93609
PackageArch	armv7hl
PackageDescription	This package contains a family of IBM 3270 mainframe terminal emulators: * terminal emulators for interactive use x3270 X Window System c3270 curses based * terminal emulators for scripted use s3270 see the x3270-script man page tcl3270 Tcl based * printer emulator pr3287 * do not miss the punch card puncher emulator x026 x3270 is an IBM 3270 terminal emulator for the X Window System. x3270 runs over a telnet connection (with or without TN3270E) and emulates either an IBM 3279 (color) or 3278 (monochrome). It supports APL2 characters, IND$FILE file transfer, NVT mode, a pop-up keypad for 3270-specific keys, alternative keymaps, 3287 printer sessions, and a scrollbar and has extensive debugging and scripting facilities. x3270a is a script that computes the correct font sizes for higher-resolution displays, then runs x3270. (x3270 handles scaling of visual elements automatically, but it cannot adjust the font sizes by itself.) b3270 is a generic back-end for 3270 emulators. It implements the 3270 protocol and host input/output, and communicates with a front end application using a simple XML-based protocol. c3270 is the curses-based version of x3270. It runs on any dumb terminal (an xterm or a console, for example), and supports (almost) all of the x3270 features. c3270 scripts are compatible with x3270 scripts, and the subset of command line options and resource definitions are also compatible. s3270 is a scripting-only version of x3270. This program is intended primarily for writing "screen-scraping" applications, for example a CGI back-end script that retrieves database information from a mainframe. tcl3270 is a Tcl-based 3270 scripting engine. It lets you write Tcl scripts that manipulate 3270 sessions, and is quite a bit easier to set up and use than s3270. pr3287 is the printer companion for the above tools, and allows printer output from a 3270 session to be directed to a Unix printer queue. x026 is a fun toy which emulates an x026 puncher.
PackageName	x3270
PackageRelease	1098.53
PackageVersion	4.0
SHA-1	6FA216706EB3389EDC0DDF2608CD8C584A540D70
SHA-256	CB37ACE6807681A38A9FECEF62D856A5B13D16D8DA78D07575B8F6E1A07E6C29

Key	Value
MD5	0241E7ADA875DFC9EA9BFDEE9A332A7C
PackageArch	armv7hl
PackageDescription	The x3270 program opens a window in the X Window System which emulates the actual look of an IBM 3278/3279 terminal, commonly used with mainframe applications. x3270 also allows you to telnet to an IBM host from the x3270 window. Install the x3270-x11 package if you need to access IBM hosts using an IBM 3278/3279 terminal emulator from X11.
PackageMaintainer	Fedora Project
PackageName	x3270-x11
PackageRelease	2.fc34
PackageVersion	4.0ga14
SHA-1	7DC42BCCA52EAD5102542794136C2B0124C659A0
SHA-256	7B69E4A71F3969F65050B452B943363C2F47767CA2D81EAF8D26D992D2F1455A

Key	Value
MD5	8E07122609F22C1FE14F23822F79FB1D
PackageArch	x86_64
PackageDescription	This package contains a family of IBM 3270 mainframe terminal emulators: * terminal emulators for interactive use x3270 X Window System c3270 curses based * terminal emulators for scripted use s3270 see the x3270-script man page tcl3270 Tcl based * printer emulator pr3287 * do not miss the punch card puncher emulator x026 x3270 is an IBM 3270 terminal emulator for the X Window System. x3270 runs over a telnet connection (with or without TN3270E) and emulates either an IBM 3279 (color) or 3278 (monochrome). It supports APL2 characters, IND$FILE file transfer, NVT mode, a pop-up keypad for 3270-specific keys, alternative keymaps, 3287 printer sessions, and a scrollbar and has extensive debugging and scripting facilities. x3270a is a script that computes the correct font sizes for higher-resolution displays, then runs x3270. (x3270 handles scaling of visual elements automatically, but it cannot adjust the font sizes by itself.) b3270 is a generic back-end for 3270 emulators. It implements the 3270 protocol and host input/output, and communicates with a front end application using a simple XML-based protocol. c3270 is the curses-based version of x3270. It runs on any dumb terminal (an xterm or a console, for example), and supports (almost) all of the x3270 features. c3270 scripts are compatible with x3270 scripts, and the subset of command line options and resource definitions are also compatible. s3270 is a scripting-only version of x3270. This program is intended primarily for writing "screen-scraping" applications, for example a CGI back-end script that retrieves database information from a mainframe. tcl3270 is a Tcl-based 3270 scripting engine. It lets you write Tcl scripts that manipulate 3270 sessions, and is quite a bit easier to set up and use than s3270. pr3287 is the printer companion for the above tools, and allows printer output from a 3270 session to be directed to a Unix printer queue. x026 is a fun toy which emulates an x026 puncher.
PackageMaintainer	https://bugs.opensuse.org
PackageName	x3270
PackageRelease	1.3
PackageVersion	4.0
SHA-1	7EF4D8671891DA19C1A544A57BC1E74958ED17C7
SHA-256	B8A36C8AD7EE41ACA435EE2AD9C584D35AE181E949A58690D89951FC02BB146E

Key	Value
MD5	D421DE184B4EDB0B5A6A7D344AD4EC83
PackageArch	i586
PackageDescription	The x3270 program opens a window in the X Window System which emulates the actual look of an IBM 3278/3279 terminal, commonly used with mainframe applications. x3270 also allows you to telnet to an IBM host from the x3270 window. Install the x3270 package if you need to access IBM hosts using an IBM 3278/3279 terminal emulator.
PackageMaintainer	umeabot <umeabot>
PackageName	x3270
PackageRelease	3.mga9
PackageVersion	4.0ga14
SHA-1	86AE90D8C94CE2686E9B4A2A323272596A93AE2D
SHA-256	E539C7BA1EAC0AC85536B14051B0E47D734D648EAF5109F47A9B69CF844FE264

Key	Value
MD5	86999725A928365E1A06EA209B1C46C9
PackageArch	x86_64
PackageDescription	The x3270 program opens a window in the X Window System which emulates the actual look of an IBM 3278/3279 terminal, commonly used with mainframe applications. x3270 also allows you to telnet to an IBM host from the x3270 window. Install the x3270-x11 package if you need to access IBM hosts using an IBM 3278/3279 terminal emulator from X11.
PackageMaintainer	Fedora Project
PackageName	x3270-x11
PackageRelease	2.fc34
PackageVersion	4.0ga14
SHA-1	8DB110FE786A0140CF8103A8557C86F2C829A5C7
SHA-256	447B183909C96F22D4B78493518CD03C338EC92AF2A130A22EEA5CEFA9FE7EAE