Parents (Total: 9)

The searched file hash is included in 9 parent files which include package known and seen by metalookup. A sample is included below:

Key	Value
MD5	6047A3C9FAA441A1BD60D2328D94026E
PackageArch	noarch
PackageDescription	Many cross-platform test failures -- particularly on Win32 -- are due to hard-coded file paths being used in comparison tests. my $file = get_file(); # returns "foo\bar.t"; is( $file, "foo/bar.t" ); # fails on Win32 This simple module provides some handy functions to convert all those path separators automatically so filename tests will just DWIM. The alternative is to write your own utility subroutine and use it everywhere or just keep on littering your test code with calls to File::Spec -- yuck! is( $file, File::Spec->canonpath("some/path"), "should pass" ); Since this module is so simple, you might not think it worth including as a dependency. After all, it's not _that_ hard to always remember to use the File::Spec manpage, the Path::Tiny manpage or some other file utility, right? But odds are that, at some point, you'll be so busy writing tests that you'll forget and hard-code a path in your haste to show what a clever programmer you are. So just use this module and stop worrying about it. You'll be happier and so will anyone trying to install your modules on Win32.
PackageName	perl-Test-Filename
PackageRelease	lp150.1.2
PackageVersion	0.03
SHA-1	DF3622195862D066A146C8C77345D53EA3AD031F
SHA-256	46E7C849C7C752C3C2CFC379A138F8088D293B9DA370D1C8E47A0A64EBE25787

Key	Value
MD5	F14BD800D2A26AF307A596D8E3FE2F2B
PackageArch	noarch
PackageDescription	Many cross-platform test failures -- particularly on Win32 -- are due to hard-coded file paths being used in comparison tests. my $file = get_file(); # returns "foo\bar.t"; is( $file, "foo/bar.t" ); # fails on Win32 This simple module provides some handy functions to convert all those path separators automatically so filename tests will just DWIM. The alternative is to write your own utility subroutine and use it everywhere or just keep on littering your test code with calls to File::Spec -- yuck! is( $file, File::Spec->canonpath("some/path"), "should pass" ); Since this module is so simple, you might not think it worth including as a dependency. After all, it's not _that_ hard to always remember to use the File::Spec manpage, the Path::Tiny manpage or some other file utility, right? But odds are that, at some point, you'll be so busy writing tests that you'll forget and hard-code a path in your haste to show what a clever programmer you are. So just use this module and stop worrying about it. You'll be happier and so will anyone trying to install your modules on Win32.
PackageName	perl-Test-Filename
PackageRelease	1.3
PackageVersion	0.03
SHA-1	42B532DD87DDF6DD47612487290362CB462D2AF5
SHA-256	6DA268EB928D6FD00B8889A012E003B48F7530AD8066DDEC6008DBED721FD6B1

Key	Value
MD5	31F4D8A42A31540BBC104FB38551C502
PackageArch	noarch
PackageDescription	Many cross-platform test failures -- particularly on Win32 -- are due to hard-coded file paths being used in comparison tests. my $file = get_file(); # returns "foo\bar.t"; is( $file, "foo/bar.t" ); # fails on Win32 This simple module provides some handy functions to convert all those path separators automatically so filename tests will just DWIM. The alternative is to write your own utility subroutine and use it everywhere or just keep on littering your test code with calls to File::Spec -- yuck! is( $file, File::Spec->canonpath("some/path"), "should pass" ); Since this module is so simple, you might not think it worth including as a dependency. After all, it's not _that_ hard to always remember to use the File::Spec manpage, the Path::Tiny manpage or some other file utility, right? But odds are that, at some point, you'll be so busy writing tests that you'll forget and hard-code a path in your haste to show what a clever programmer you are. So just use this module and stop worrying about it. You'll be happier and so will anyone trying to install your modules on Win32.
PackageName	perl-Test-Filename
PackageRelease	lp151.1.1
PackageVersion	0.03
SHA-1	075525D61AD53E34CE8E667F12F6C5865C0ED5F1
SHA-256	CB5DC7041B498CC4BB54BC08FC4BE12DE2B940CAFA222D9B97A3776D0041ED37

Key	Value
MD5	895086B3384FA386C9CA76A10B477B4F
PackageArch	noarch
PackageDescription	Many cross-platform test failures -- particularly on Win32 -- are due to hard-coded file paths being used in comparison tests. my $file = get_file(); # returns "foo\bar.t"; is( $file, "foo/bar.t" ); # fails on Win32 This simple module provides some handy functions to convert all those path separators automatically so filename tests will just DWIM. The alternative is to write your own utility subroutine and use it everywhere or just keep on littering your test code with calls to File::Spec -- yuck! is( $file, File::Spec->canonpath("some/path"), "should pass" ); Since this module is so simple, you might not think it worth including as a dependency. After all, it's not _that_ hard to always remember to use the File::Spec manpage, the Path::Tiny manpage or some other file utility, right? But odds are that, at some point, you'll be so busy writing tests that you'll forget and hard-code a path in your haste to show what a clever programmer you are. So just use this module and stop worrying about it. You'll be happier and so will anyone trying to install your modules on Win32.
PackageName	perl-Test-Filename
PackageRelease	lp153.1.9
PackageVersion	0.03
SHA-1	40101995260E30E0E86030F4AD2EB8964E8D448A
SHA-256	C1A538C52D07541F976184AF48E8CC9EDDE1A2B99E789F7ABA1464E9F1B646E3

Key	Value
MD5	044FD2F3DEF57F01FF343D8657879ABB
PackageArch	noarch
PackageDescription	Many cross-platform test failures -- particularly on Win32 -- are due to hard-coded file paths being used in comparison tests. my $file = get_file(); # returns "foo\bar.t"; is( $file, "foo/bar.t" ); # fails on Win32 This simple module provides some handy functions to convert all those path separators automatically so filename tests will just DWIM. The alternative is to write your own utility subroutine and use it everywhere or just keep on littering your test code with calls to File::Spec -- yuck! is( $file, File::Spec->canonpath("some/path"), "should pass" ); Since this module is so simple, you might not think it worth including as a dependency. After all, it's not _that_ hard to always remember to use the File::Spec manpage, the Path::Tiny manpage or some other file utility, right? But odds are that, at some point, you'll be so busy writing tests that you'll forget and hard-code a path in your haste to show what a clever programmer you are. So just use this module and stop worrying about it. You'll be happier and so will anyone trying to install your modules on Win32.
PackageName	perl-Test-Filename
PackageRelease	1.2
PackageVersion	0.03
SHA-1	F84F02CC986130DBF0CFD06D7B104878CDD97502
SHA-256	B9260415832E65F103FF990418808E159FE88E8D151424067B4EEA533F57DFAA

Key	Value
MD5	A9B59EE4F3CD9AC46BF376C0AF203B94
PackageArch	noarch
PackageDescription	Many cross-platform test failures -- particularly on Win32 -- are due to hard-coded file paths being used in comparison tests. my $file = get_file(); # returns "foo\bar.t"; is( $file, "foo/bar.t" ); # fails on Win32 This simple module provides some handy functions to convert all those path separators automatically so filename tests will just DWIM. The alternative is to write your own utility subroutine and use it everywhere or just keep on littering your test code with calls to File::Spec -- yuck! is( $file, File::Spec->canonpath("some/path"), "should pass" ); Since this module is so simple, you might not think it worth including as a dependency. After all, it's not _that_ hard to always remember to use the File::Spec manpage, the Path::Tiny manpage or some other file utility, right? But odds are that, at some point, you'll be so busy writing tests that you'll forget and hard-code a path in your haste to show what a clever programmer you are. So just use this module and stop worrying about it. You'll be happier and so will anyone trying to install your modules on Win32.
PackageName	perl-Test-Filename
PackageRelease	1.3
PackageVersion	0.03
SHA-1	F264119DF179A01495E1283EE392A2C5FB9B319A
SHA-256	6508AF088AABA9CEF408904FB42B96309890541F82DDE291F1CC999DCBB0F84B

Key	Value
MD5	1902F296A655B5F2E4C7A09DA6C6C94A
PackageArch	noarch
PackageDescription	Many cross-platform test failures -- particularly on Win32 -- are due to hard-coded file paths being used in comparison tests. my $file = get_file(); # returns "foo\bar.t"; is( $file, "foo/bar.t" ); # fails on Win32 This simple module provides some handy functions to convert all those path separators automatically so filename tests will just DWIM. The alternative is to write your own utility subroutine and use it everywhere or just keep on littering your test code with calls to File::Spec -- yuck! is( $file, File::Spec->canonpath("some/path"), "should pass" ); Since this module is so simple, you might not think it worth including as a dependency. After all, it's not _that_ hard to always remember to use the File::Spec manpage, the Path::Tiny manpage or some other file utility, right? But odds are that, at some point, you'll be so busy writing tests that you'll forget and hard-code a path in your haste to show what a clever programmer you are. So just use this module and stop worrying about it. You'll be happier and so will anyone trying to install your modules on Win32.
PackageName	perl-Test-Filename
PackageRelease	lp152.1.1
PackageVersion	0.03
SHA-1	A27C84409F4C5FF7DB766C4F4F55F71841A3178E
SHA-256	166330E8C942FBFAE5D50CAC996451E8749629BD2E17D334DCAD9E01F450876E

Key	Value
MD5	FE0FD72A7D3BB0639DA7F9158DEF2981
PackageArch	noarch
PackageDescription	Many cross-platform test failures -- particularly on Win32 -- are due to hard-coded file paths being used in comparison tests. my $file = get_file(); # returns "foo\bar.t"; is( $file, "foo/bar.t" ); # fails on Win32 This simple module provides some handy functions to convert all those path separators automatically so filename tests will just DWIM. The alternative is to write your own utility subroutine and use it everywhere or just keep on littering your test code with calls to File::Spec -- yuck! is( $file, File::Spec->canonpath("some/path"), "should pass" ); Since this module is so simple, you might not think it worth including as a dependency. After all, it's not _that_ hard to always remember to use the File::Spec manpage, the Path::Tiny manpage or some other file utility, right? But odds are that, at some point, you'll be so busy writing tests that you'll forget and hard-code a path in your haste to show what a clever programmer you are. So just use this module and stop worrying about it. You'll be happier and so will anyone trying to install your modules on Win32.
PackageName	perl-Test-Filename
PackageRelease	1.1
PackageVersion	0.03
SHA-1	530CD730408FAB682EB597F6F4625BB445D80B45
SHA-256	28B41C1DAAF7D44F53D6DCCFA04B29D73C3E9361B104C544246390B6DA06697E

Key	Value
MD5	A50C42895827315227083471BF88DED0
PackageArch	noarch
PackageDescription	Many cross-platform test failures -- particularly on Win32 -- are due to hard-coded file paths being used in comparison tests. my $file = get_file(); # returns "foo\bar.t"; is( $file, "foo/bar.t" ); # fails on Win32 This simple module provides some handy functions to convert all those path separators automatically so filename tests will just DWIM. The alternative is to write your own utility subroutine and use it everywhere or just keep on littering your test code with calls to File::Spec -- yuck! is( $file, File::Spec->canonpath("some/path"), "should pass" ); Since this module is so simple, you might not think it worth including as a dependency. After all, it's not _that_ hard to always remember to use the File::Spec manpage, the Path::Tiny manpage or some other file utility, right? But odds are that, at some point, you'll be so busy writing tests that you'll forget and hard-code a path in your haste to show what a clever programmer you are. So just use this module and stop worrying about it. You'll be happier and so will anyone trying to install your modules on Win32.
PackageName	perl-Test-Filename
PackageRelease	1.2
PackageVersion	0.03
SHA-1	E7C2C578C5DD511BD3B5875858CA8A089D8110FA
SHA-256	79CA2D35C92431C33C5BCD081DE0C1514627E85CD09008887CC862FD49C543FB