| Key | Value |
|---|---|
| FileName | ./usr/share/PrusaSlicer/icons/preview_menu.svg |
| FileSize | 2736 |
| MD5 | F26D46FA120CE4576A9D73AEF9325124 |
| SHA-1 | 08769D6CBC1517B0F21A68B250F8C14FB35C44AD |
| SHA-256 | A820D94636EF7BF1EDF499F746EF3BDBB4437D8BF1AEF265DABFC370F2B6C3B4 |
| SHA-512 | 45A0925CAB20645A253EA03024FC050EE7F70E182247233BD36CA93D656714E89D55951FE459773DB0CDC904ECE99DDC6AB1DA289B748BCC951E139241815422 |
| SSDEEP | 48:cdAqf3PrwMhoSo/Qw7h7So/twMVh7Bo/OhLwwThoBo/CwLhoSo/P+wYhoSo/s5hl:tqfUagZ9tmY+zIDrtgP/ugsrg/8DoUxf |
| TLSH | T10D517D475B5C778D24A2BA103BF7F282A4A669C262D4B0D4F317AC01F9461FD457CAB4 |
| insert-timestamp | 1639939159.984669 |
| mimetype | image/svg+xml |
| source | snap:nMCkMCzUuBxyI7UtoiHdsJsapT8mUfbY_29 |
| tar:gname | root |
| tar:uname | root |
| hashlookup:parent-total | 39 |
| hashlookup:trust | 100 |
The searched file hash is included in 39 parent files which include package known and seen by metalookup. A sample is included below:
| Key | Value |
|---|---|
| MD5 | 06AC6B07D4FD43BA84259C757E2D8CD0 |
| PackageArch | x86_64 |
| PackageDescription | PrusaSlicer takes 3D models (STL, OBJ, AMF) and converts them into G-code instructions for FFF printers or PNG layers for mSLA 3D printers. It's compatible with any modern printer based on the RepRap toolchain, including all those based on the Marlin, Prusa, Sprinter and Repetier firmware. It also works with Mach3, LinuxCNC and Machinekit controllers. PrusaSlicer is based on Slic3r by Alessandro Ranelucci and the RepRap community. |
| PackageMaintainer | Fedora Project |
| PackageName | prusa-slicer |
| PackageRelease | 1.fc32 |
| PackageVersion | 2.2.0 |
| SHA-1 | 04ED9766966EFC93FCF3F978D7E1A56CCD470882 |
| SHA-256 | 6B2114F77FBFF5CA2EED812D6BA7D6B0629EB8E1CDA475B7C5C617D228C5FBBC |
| Key | Value |
|---|---|
| FileSize | 26990116 |
| MD5 | 09E4BC646335E3CE1A92A764499728B7 |
| PackageDescription | G-code generator for 3D printers PrusaSlicer converts digital 3D models into printing instructions (G-code) for your 3D printer. It cuts the model into horizontal slices (layers), generates toolpaths to fill them and calculates the amount of material to be extruded. . PrusaSlicer supports input in the STL, AMF and OBJ formats, and can output G-code for several series of 3D printers, including RepRap, Ultimaker, Makerbot, as well as SVG files for DLP printers. . It can be used with a graphical interface, or in batch mode via the command-line. |
| PackageMaintainer | Debian 3-D Printing Packages <3dprinter-general@lists.alioth.debian.org> |
| PackageName | prusa-slicer |
| PackageSection | misc |
| PackageVersion | 2.3.1+dfsg-1+b2 |
| SHA-1 | 06E94BDAED68674DE138E44181A707FD94F424D1 |
| SHA-256 | 4B598B5C5DDEA7A36383BB3B9C79A6C478036177D89C121824D34E42A3AEE077 |
| Key | Value |
|---|---|
| MD5 | C8D5B7FD99803B90A845B69178DDB271 |
| PackageArch | x86_64 |
| PackageDescription | PrusaSlicer takes 3D models (STL, OBJ, AMF) and converts them into G-code instructions for FFF printers or PNG layers for mSLA 3D printers. It's compatible with any modern printer based on the RepRap toolchain, including all those based on the Marlin, Prusa, Sprinter and Repetier firmware. It also works with Mach3, LinuxCNC and Machinekit controllers. PrusaSlicer is based on Slic3r by Alessandro Ranelucci and the RepRap community. |
| PackageMaintainer | Fedora Project |
| PackageName | prusa-slicer |
| PackageRelease | 11.fc34 |
| PackageVersion | 2.2.0 |
| SHA-1 | 0AEA08BDACCBBADCE708E8FF57D40F71B1AFDC41 |
| SHA-256 | 069956669F872B7E8339400BF9F68F794DFE3F0717501F8B7074A5AC51482A0C |
| Key | Value |
|---|---|
| SHA-1 | 0AFA2E2700F1056392E34253EBC69D1364716257 |
| snap-authority | canonical |
| snap-filename | nMCkMCzUuBxyI7UtoiHdsJsapT8mUfbY_29.snap |
| snap-id | nMCkMCzUuBxyI7UtoiHdsJsapT8mUfbY_29 |
| snap-name | prusa-slicer |
| snap-publisher-id | EdJm3h1azpdLixkMX9CgATpb6R8HOHkX |
| snap-signkey | BWDEoaqyr25nF5SNCvEv2v7QnM9QsfCc0PBMYD_i2NGSQ32EF2d4D0hqUel3m8ul |
| snap-timestamp | 2020-06-19T04:53:52.150905Z |
| source-url | https://api.snapcraft.io/api/v1/snaps/download/nMCkMCzUuBxyI7UtoiHdsJsapT8mUfbY_29.snap |
| Key | Value |
|---|---|
| FileSize | 22051552 |
| MD5 | FA7B5DA393F89135543A0B374792CE2E |
| PackageDescription | G-code generator for 3D printers PrusaSlicer converts digital 3D models into printing instructions (G-code) for your 3D printer. It cuts the model into horizontal slices (layers), generates toolpaths to fill them and calculates the amount of material to be extruded. . PrusaSlicer supports input in the STL, AMF and OBJ formats, and can output G-code for several series of 3D printers, including RepRap, Ultimaker, Makerbot, as well as SVG files for DLP printers. . It can be used with a graphical interface, or in batch mode via the command-line. |
| PackageMaintainer | Debian 3-D Printing Packages <3dprinter-general@lists.alioth.debian.org> |
| PackageName | prusa-slicer |
| PackageSection | misc |
| PackageVersion | 2.3.0+dfsg-1 |
| SHA-1 | 13F8C3A768E7CFE8C085A42D30DB792A38AD43D5 |
| SHA-256 | C45FE9D25046F49418D5C2A7FFBA1CDDE4866C325C0B2DA6DF351DA1A2BE834A |
| Key | Value |
|---|---|
| FileSize | 21324488 |
| MD5 | 6E35B9279BB4CB1C41864DBEB73369C4 |
| PackageDescription | G-code generator for 3D printers PrusaSlicer converts digital 3D models into printing instructions (G-code) for your 3D printer. It cuts the model into horizontal slices (layers), generates toolpaths to fill them and calculates the amount of material to be extruded. . PrusaSlicer supports input in the STL, AMF and OBJ formats, and can output G-code for several series of 3D printers, including RepRap, Ultimaker, Makerbot, as well as SVG files for DLP printers. . It can be used with a graphical interface, or in batch mode via the command-line. |
| PackageMaintainer | Debian 3-D Printing Packages <3dprinter-general@lists.alioth.debian.org> |
| PackageName | prusa-slicer |
| PackageSection | misc |
| PackageVersion | 2.3.0+dfsg-1 |
| SHA-1 | 204F702889574EB6D930EC7F7D57BC9FF489DD81 |
| SHA-256 | 296E9110B34C719B49B505E215302E5F02B105A5D26694DD3953649DF9A37033 |
| Key | Value |
|---|---|
| MD5 | 5CAD1AAE53C679BE9C0FE0898BD50872 |
| PackageArch | x86_64 |
| PackageDescription | PrusaSlicer takes 3D models (STL, OBJ, AMF) and converts them into G-code instructions for FFF printers or PNG layers for mSLA 3D printers. It's compatible with any modern printer based on the RepRap toolchain, including all those based on the Marlin, Prusa, Sprinter and Repetier firmware. It also works with Mach3, LinuxCNC and Machinekit controllers. PrusaSlicer is based on Slic3r by Alessandro Ranelucci and the RepRap community. |
| PackageMaintainer | Fedora Project |
| PackageName | prusa-slicer |
| PackageRelease | 4.fc33 |
| PackageVersion | 2.2.0 |
| SHA-1 | 2B00D0168B9E79B8ADD6EE543B2A94A6159F97D2 |
| SHA-256 | 660B999E54545BD01E5A00BE342879899EFCB8DF101391636548D4CDC5497B74 |
| Key | Value |
|---|---|
| FileSize | 26325704 |
| MD5 | D4632D1355ED7842E9359D7A93FFF9A4 |
| PackageDescription | G-code generator for 3D printers PrusaSlicer converts digital 3D models into printing instructions (G-code) for your 3D printer. It cuts the model into horizontal slices (layers), generates toolpaths to fill them and calculates the amount of material to be extruded. . PrusaSlicer supports input in the STL, AMF and OBJ formats, and can output G-code for several series of 3D printers, including RepRap, Ultimaker, Makerbot, as well as SVG files for DLP printers. . It can be used with a graphical interface, or in batch mode via the command-line. |
| PackageMaintainer | Debian 3-D Printing Packages <3dprinter-general@lists.alioth.debian.org> |
| PackageName | prusa-slicer |
| PackageSection | misc |
| PackageVersion | 2.3.1+dfsg-1+b2 |
| SHA-1 | 4197347A81689712493B443050E3D449D8A43A3B |
| SHA-256 | E584BFDC0DE93D8E1250FDD2DD0BBF568625FFA70DBC572F27752D33FF59A218 |
| Key | Value |
|---|---|
| FileSize | 27664192 |
| MD5 | BD15A8E23EDA8F99341AB3EC6BFA0DF9 |
| PackageDescription | G-code generator for 3D printers PrusaSlicer converts digital 3D models into printing instructions (G-code) for your 3D printer. It cuts the model into horizontal slices (layers), generates toolpaths to fill them and calculates the amount of material to be extruded. . PrusaSlicer supports input in the STL, AMF and OBJ formats, and can output G-code for several series of 3D printers, including RepRap, Ultimaker, Makerbot, as well as SVG files for DLP printers. . It can be used with a graphical interface, or in batch mode via the command-line. |
| PackageMaintainer | Debian 3-D Printing Packages <3dprinter-general@lists.alioth.debian.org> |
| PackageName | prusa-slicer |
| PackageSection | misc |
| PackageVersion | 2.3.1+dfsg-1+b2 |
| SHA-1 | 4A0CAD3E9A4AD862EFB4B4F9FE0AED68AFF9BF6B |
| SHA-256 | 44BE617268426E4F21EB36FEB591E167FEA5B2951A689A6A4564D36682DD1DCE |
| Key | Value |
|---|---|
| FileSize | 26170588 |
| MD5 | 3FB72FE2F36130139C06B78AD8D3B4AC |
| PackageDescription | G-code generator for 3D printers PrusaSlicer converts digital 3D models into printing instructions (G-code) for your 3D printer. It cuts the model into horizontal slices (layers), generates toolpaths to fill them and calculates the amount of material to be extruded. . PrusaSlicer supports input in the STL, AMF and OBJ formats, and can output G-code for several series of 3D printers, including RepRap, Ultimaker, Makerbot, as well as SVG files for DLP printers. . It can be used with a graphical interface, or in batch mode via the command-line. |
| PackageMaintainer | Debian 3-D Printing Packages <3dprinter-general@lists.alioth.debian.org> |
| PackageName | prusa-slicer |
| PackageSection | misc |
| PackageVersion | 2.3.1+dfsg-1+b2 |
| SHA-1 | 5745E3D366C3CDC9F5D144BC17459F94427D9537 |
| SHA-256 | 54BA9775ACE5C60967963D68DD1D057D29967B5E4463630E7689818BFDCDE933 |