Parents (Total: 18)

The searched file hash is included in 18 parent files which include package known and seen by metalookup. A sample is included below:

Key	Value
FileSize	1093760
MD5	55D3F194AF0ADF8766EE28894FADAAD4
PackageDescription	scripts to make the life of a Debian Package maintainer easier Contains the following scripts, dependencies/recommendations shown in brackets afterwards: . - annotate-output: run a command and prepend time and stream (O for stdout, E for stderr) for every line of output. - archpath: Prints arch (tla/Bazaar) package names. Also supports calculating the package names for other branches. [tla | bazaar] - bts: A command-line tool for accessing the Debian Bug Tracking System, both to send mails to control@bts.debian.org and to access the web pages and SOAP interface of the BTS. [www-browser, libauthen-sasl-perl, libnet-smtps-perl, libsoap-lite-perl, liburi-perl, libwww-perl, bsd-mailx | mailx] - build-rdeps: Searches for all packages that build-depend on a given package. [dctrl-tools, dose-extra, libdpkg-perl] - chdist: tool to easily play with several distributions. [dctrl-tools] - checkbashisms: check whether a /bin/sh script contains any common bash-specific constructs. - cowpoke: upload a Debian source package to a cowbuilder host and build it, optionally also signing and uploading the result to an incoming queue. [ssh-client] - cvs-debi, cvs-debc: wrappers around debi and debc respectively (see below) which allow them to be called from the CVS working directory. [cvs-buildpackage] - cvs-debrelease: wrapper around debrelease which allows it to be called from the CVS working directory. [cvs-buildpackage, dupload | dput, ssh-client] - cvs-debuild: A wrapper for cvs-buildpackage to use debuild as its package building program. [cvs-buildpackage, fakeroot, lintian, gnupg |gnupg2] - dcmd: run a given command replacing the name of a .changes or .dsc file with each of the files referenced therein. * - dd-list: given a list of packages, pretty-print it ordered by maintainer. * - debbisect: bisect snapshot.debian.org to find which change in the archive introduced a certain problem. [mmdebstrap, python3-debian] - debc: List contents of current package. Do this after a successful "debuild" to see if the package looks all right. - debchange (abbreviation dch): Modifies debian/changelog and manages version numbers for you. It will either increment the version number or add an entry for the current version, depending upon the options given to it. [libdistro-info-perl, libsoap-lite-perl]* - debcheckout: checkout the development repository of a Debian package. * - debclean: Clean a Debian source tree. Debclean will clean all Debian source trees below the current directory, and if requested, also remove all files that were generated from these source trees (that is .deb, .dsc and .changes files). It will keep the .diffs and original files, though, so that the binaries and other files can be rebuilt if necessary. [fakeroot]* - debcommit: Commits changes to cvs, darcs, svn, svk, tla, bzr, git, or hg, using new entries in debian/changelog as the commit message. Also supports tagging Debian package releases. [cvs | darcs | subversion | svk | tla | bzr | git-core | mercurial, libtimedate-perl] - debdiff: A program which examines two .deb files or two .changes files and reports on any difference found in their file lists. Useful for ensuring that no files were inadvertently lost between versions. Can also examine two .dsc files and report on the changes between source versions. For a deeper comparison one can use the diffoscope package. [wdiff, patchutils]* - debdiff-apply: Apply unified diffs of two Debian source packages, such as those generated by debdiff, to a target Debian source package. Any changes to debian/changelog are dealt with specially, to avoid the conflicts that changelog diffs typically produce when applied naively. May be used to check that old patches still apply to newer versions of those packages. [python3-debian, python3-unidiff, quilt] - debi: Installs the current package by using the setuid root debpkg script described below. It assumes that the current package has just been built (for example by debuild), and the .deb lives in the parent directory, and will effectively run dpkg -i on the .deb. The ability to install the package with a very short command is very useful when troubleshooting packages. - debpkg: A wrapper for dpkg used by debi to allow convenient testing of packages. For debpkg to work, it needs to be made setuid root, and this needs to be performed by the sysadmin -- it is not installed as setuid root by default. (Note that being able to run a setuid root debpkg is effectively the same as having root access to the system, so this should be done with caution.) Having debpkg as a wrapper for dpkg can be a Good Thing (TM), as it decreases the potential for damage by accidental wrong use of commands in superuser mode (e.g., an inadvertent rm -rf * in the wrong directory is disastrous as many can attest to). - debrelease: A wrapper around dupload or dput which figures out which version to upload, and then calls dupload or dput to actually perform the upload. [dupload | dput, ssh-client] - debrebuild: A script that provided a .buildinfo file reports the instructions on how to try to reproduce the reported build. [sbuild | mmdebstrap, libdistro-info-perl] - debrepro: A script that tests reproducibility of Debian packages. It will build a given source directory twice, with a set of variation between the first and second build, and compare the binary packages produced. If diffoscope is installed, it is used to compare non-matching binaries. If disorderfs is installed, it is used during the build to inject non-determinism in filesystem listing operations. [faketime, diffoscope, disorderfs] - debrsign: This transfers a .changes/.dsc pair to a remote machine for signing, and runs debsign on the remote machine over an SSH connection. [gnupg | gnupg2, debian-keyring, ssh-client] - debsign: Use GNU Privacy Guard to sign the changes (and possibly dsc) files created by running dpkg-buildpackage with no-sign options. Useful if you are building a package on a remote machine and wish to sign it on a local one. This script is capable of automatically downloading the .changes and .dsc files from a remote machine. [gnupg |gnupg2, debian-keyring, ssh-client]* - debsnap: grab packages from https://snapshot.debian.org [libwww-perl, libjson-perl] - debuild: A wrapper for building a package (i.e., dpkg-buildpackage) to avoid problems with insufficient permissions and wrong paths etc. Debuild will set up the proper environment for building a package. Debuild will use the fakeroot program to build the package by default, but can be instructed to use any other gain-root command, or can even be installed setuid root. Debuild can also be used to run various of the debian/rules operations with the same root-gaining procedure. Debuild will also run lintian to check that the package does not have any major policy violations. [fakeroot, lintian, gnupg | gnupg2]* - deb-reversion: increases a binary package version number and repacks the package, useful for porters and the like. - deb-why-removed: shows the reason a package was removed from the archive. [libdpkg-perl] - dep3changelog: generate a changelog entry from a DEP3-style patch header. - desktop2menu: given a freedesktop.org desktop file, generate a skeleton for a menu file. [libfile-desktopentry-perl] - dget: Downloads Debian source and binary packages. Point at a .changes or .dsc to download all references files. Specify a package name to download it from the configured apt repository. [wget | curl] - diff2patches: extracts patches from a .diff.gz file placing them under debian/ or, if present, debian/patches. [patchutils] - dpkg-depcheck, dpkg-genbuilddeps: Runs a specified command (such as debian/rules build) or dpkg-buildpackage, respectively, to determine the packages used during the build process. This information can be helpful when trying to determine the packages needed in the Build-Depends etc. lines in the debian/control file. [build-essential, strace] - dscextract: extract a single file from a Debian source package. [patchutils] - dscverify: check the signature and MD5 sums of a dsc file against the most current Debian keyring on your system. [gnupg | gnupg2, debian-keyring] - edit-patch: add/edit a patch for a source package and commit the changes. [quilt | dpatch | cdbs] - getbuildlog: download package build logs from Debian auto-builders. [wget] - git-deborig: try to produce Debian orig.tar using git-archive(1). [libdpkg-perl, libgit-wrapper-perl, liblist-compare-perl, libstring-shellquote-perl, libtry-tiny-perl] - grep-excuses: grep britney's excuses to find out what is happening to your packages. [libdbd-pg-perl, libterm-size-perl, libyaml-syck-perl, wget, w3m] - hardening-check: report the hardening characteristics of a set of binaries. - list-unreleased: searches for packages marked UNRELEASED in their changelog. - ltnu (Long Time No Upload): List all uploads of packages by the given uploader or maintainer and display them ordered by the last upload of that package, oldest uploads first. - manpage-alert: locate binaries without corresponding manpages. [man-db] - mass-bug: mass-file bug reports. [bsd-mailx | mailx] - mergechanges: merge .changes files from the same release but built on different architectures. - mk-build-deps: Given a package name and/or control file, generate a binary package which may be installed to satisfy the build-dependencies of the given package. [equivs] - mk-origtargz: Rename upstream tarball, optionally changing the compression and removing unwanted files. [libfile-which-perl, unzip, xz-utils, file] - namecheck: Check project names are not already taken. - nmudiff: prepare a diff of this version (presumably an NMU against the previously released version (as per the changelog) and submit the diff to the BTS. [patchutils, mutt] - origtargz: fetch the orig tarball of a Debian package from various sources, and unpack it. [pristine-tar] - plotchangelog: display information from a changelog graphically using gnuplot. [libtimedate-perl, gnuplot] - pts-subscribe: subscribe to the PTS (Package Tracking System) for a limited period of time. [bsd-mailx | mailx, at] - rc-alert: list installed packages which have release-critical bugs. [wget | curl] - reproducible-check: reports on the reproducible status of installed packages. For more details please see <https://reproducible-builds.org>. - rmadison: remotely query the Debian archive database about packages. [liburi-perl, wget | curl] - sadt: run DEP-8 tests. [python3-debian] - salsa: manipulates salsa.debian.org repositories and users [libgitlab-api-v4-perl] - suspicious-source: output a list of files which are not common source files. [python3-magic] - svnpath: Prints the path to the Subversion repository of a Subversion checkout. Also supports calculating the paths for branches and tags in a repository independent fashion. Used by debcommit to generate svn tags. [subversion] - tagpending: runs from a Debian source tree and tags bugs that are to be closed in the latest changelog as pending. [libsoap-lite-perl] - transition-check: Check a list of source packages for involvement in transitions for which uploads to unstable are currently blocked. [libwww-perl, libyaml-syck-perl] - uscan: Automatically scan for and download upstream updates. Uscan can also call a program such as uupdate to attempt to update the Debianised version based on the new update. Whilst uscan could be used to release the updated version automatically, it is probably better not to without testing it first. Uscan can also verify detached OpenPGP signatures if upstream's signing key is known. [file, gpgv | gpgv2, gnupg | gnupg2, libfile-dirlist-perl, libfile-touch-perl, libfile-which-perl, liblwp-protocol-https-perl, libmoo-perl, libwww-perl, unzip, xz-utils]* - uupdate: Update the package with an archive or patches from an upstream author. This will be of help if you have to update your package. It will try to apply the latest diffs to your package and tell you how successful it was. [patch] - what-patch: determine what patch system, if any, a source package is using. [patchutils] - whodepends: check which maintainers' packages depend on a package. - who-permits-upload: Retrieve information about Debian Maintainer access control lists. [gnupg | gnupg2, libencode-locale-perl, libwww-perl, debian-keyring] - who-uploads: determine the most recent uploaders of a package to the Debian archive. [gnupg | gnupg2, debian-keyring, debian-maintainers, wget] - wnpp-alert: list installed packages which are orphaned or up for adoption. [wget | curl] - wnpp-check: check whether there is an open request for packaging or intention to package bug for a package. [wget | curl] - wrap-and-sort: wrap long lines and sort items in packaging files. [python3-debian] - /usr/share/doc/devscripts/examples: This directory contains examples of procmail and exim scripts for sorting mail arriving to Debian mailing lists.
PackageMaintainer	Devscripts Maintainers <devscripts@packages.debian.org>
PackageName	devscripts
PackageSection	devel
PackageVersion	2.21.4~bpo11+1
SHA-1	00023A61B4BA696B57B72572A516103D668FD611
SHA-256	000949FEAF07D9AD2AD98D446B59A4D55F220B702914DACD790B6E1F3C08A758

Key	Value
FileSize	1093676
MD5	9A68B0BD51F8AB67C01F71F4F77EB02D
PackageDescription	scripts to make the life of a Debian Package maintainer easier Contains the following scripts, dependencies/recommendations shown in brackets afterwards: . - annotate-output: run a command and prepend time and stream (O for stdout, E for stderr) for every line of output. - archpath: Prints arch (tla/Bazaar) package names. Also supports calculating the package names for other branches. [tla | bazaar] - bts: A command-line tool for accessing the Debian Bug Tracking System, both to send mails to control@bts.debian.org and to access the web pages and SOAP interface of the BTS. [www-browser, libauthen-sasl-perl, libnet-smtps-perl, libsoap-lite-perl, liburi-perl, libwww-perl, bsd-mailx | mailx] - build-rdeps: Searches for all packages that build-depend on a given package. [dctrl-tools, dose-extra, libdpkg-perl] - chdist: tool to easily play with several distributions. [dctrl-tools] - checkbashisms: check whether a /bin/sh script contains any common bash-specific constructs. - cowpoke: upload a Debian source package to a cowbuilder host and build it, optionally also signing and uploading the result to an incoming queue. [ssh-client] - cvs-debi, cvs-debc: wrappers around debi and debc respectively (see below) which allow them to be called from the CVS working directory. [cvs-buildpackage] - cvs-debrelease: wrapper around debrelease which allows it to be called from the CVS working directory. [cvs-buildpackage, dupload | dput, ssh-client] - cvs-debuild: A wrapper for cvs-buildpackage to use debuild as its package building program. [cvs-buildpackage, fakeroot, lintian, gnupg |gnupg2] - dcmd: run a given command replacing the name of a .changes or .dsc file with each of the files referenced therein. * - dd-list: given a list of packages, pretty-print it ordered by maintainer. * - debbisect: bisect snapshot.debian.org to find which change in the archive introduced a certain problem. [mmdebstrap, python3-debian] - debc: List contents of current package. Do this after a successful "debuild" to see if the package looks all right. - debchange (abbreviation dch): Modifies debian/changelog and manages version numbers for you. It will either increment the version number or add an entry for the current version, depending upon the options given to it. [libdistro-info-perl, libsoap-lite-perl]* - debcheckout: checkout the development repository of a Debian package. * - debclean: Clean a Debian source tree. Debclean will clean all Debian source trees below the current directory, and if requested, also remove all files that were generated from these source trees (that is .deb, .dsc and .changes files). It will keep the .diffs and original files, though, so that the binaries and other files can be rebuilt if necessary. [fakeroot]* - debcommit: Commits changes to cvs, darcs, svn, svk, tla, bzr, git, or hg, using new entries in debian/changelog as the commit message. Also supports tagging Debian package releases. [cvs | darcs | subversion | svk | tla | bzr | git-core | mercurial, libtimedate-perl] - debdiff: A program which examines two .deb files or two .changes files and reports on any difference found in their file lists. Useful for ensuring that no files were inadvertently lost between versions. Can also examine two .dsc files and report on the changes between source versions. For a deeper comparison one can use the diffoscope package. [wdiff, patchutils]* - debdiff-apply: Apply unified diffs of two Debian source packages, such as those generated by debdiff, to a target Debian source package. Any changes to debian/changelog are dealt with specially, to avoid the conflicts that changelog diffs typically produce when applied naively. May be used to check that old patches still apply to newer versions of those packages. [python3-debian, python3-unidiff, quilt] - debi: Installs the current package by using the setuid root debpkg script described below. It assumes that the current package has just been built (for example by debuild), and the .deb lives in the parent directory, and will effectively run dpkg -i on the .deb. The ability to install the package with a very short command is very useful when troubleshooting packages. - debpkg: A wrapper for dpkg used by debi to allow convenient testing of packages. For debpkg to work, it needs to be made setuid root, and this needs to be performed by the sysadmin -- it is not installed as setuid root by default. (Note that being able to run a setuid root debpkg is effectively the same as having root access to the system, so this should be done with caution.) Having debpkg as a wrapper for dpkg can be a Good Thing (TM), as it decreases the potential for damage by accidental wrong use of commands in superuser mode (e.g., an inadvertent rm -rf * in the wrong directory is disastrous as many can attest to). - debrelease: A wrapper around dupload or dput which figures out which version to upload, and then calls dupload or dput to actually perform the upload. [dupload | dput, ssh-client] - debrebuild: A script that provided a .buildinfo file reports the instructions on how to try to reproduce the reported build. [sbuild | mmdebstrap, libdistro-info-perl] - debrepro: A script that tests reproducibility of Debian packages. It will build a given source directory twice, with a set of variation between the first and second build, and compare the binary packages produced. If diffoscope is installed, it is used to compare non-matching binaries. If disorderfs is installed, it is used during the build to inject non-determinism in filesystem listing operations. [faketime, diffoscope, disorderfs] - debrsign: This transfers a .changes/.dsc pair to a remote machine for signing, and runs debsign on the remote machine over an SSH connection. [gnupg | gnupg2, debian-keyring, ssh-client] - debsign: Use GNU Privacy Guard to sign the changes (and possibly dsc) files created by running dpkg-buildpackage with no-sign options. Useful if you are building a package on a remote machine and wish to sign it on a local one. This script is capable of automatically downloading the .changes and .dsc files from a remote machine. [gnupg |gnupg2, debian-keyring, ssh-client]* - debsnap: grab packages from https://snapshot.debian.org [libwww-perl, libjson-perl] - debuild: A wrapper for building a package (i.e., dpkg-buildpackage) to avoid problems with insufficient permissions and wrong paths etc. Debuild will set up the proper environment for building a package. Debuild will use the fakeroot program to build the package by default, but can be instructed to use any other gain-root command, or can even be installed setuid root. Debuild can also be used to run various of the debian/rules operations with the same root-gaining procedure. Debuild will also run lintian to check that the package does not have any major policy violations. [fakeroot, lintian, gnupg | gnupg2]* - deb-reversion: increases a binary package version number and repacks the package, useful for porters and the like. - deb-why-removed: shows the reason a package was removed from the archive. [libdpkg-perl] - dep3changelog: generate a changelog entry from a DEP3-style patch header. - desktop2menu: given a freedesktop.org desktop file, generate a skeleton for a menu file. [libfile-desktopentry-perl] - dget: Downloads Debian source and binary packages. Point at a .changes or .dsc to download all references files. Specify a package name to download it from the configured apt repository. [wget | curl] - diff2patches: extracts patches from a .diff.gz file placing them under debian/ or, if present, debian/patches. [patchutils] - dpkg-depcheck, dpkg-genbuilddeps: Runs a specified command (such as debian/rules build) or dpkg-buildpackage, respectively, to determine the packages used during the build process. This information can be helpful when trying to determine the packages needed in the Build-Depends etc. lines in the debian/control file. [build-essential, strace] - dscextract: extract a single file from a Debian source package. [patchutils] - dscverify: check the signature and MD5 sums of a dsc file against the most current Debian keyring on your system. [gnupg | gnupg2, debian-keyring] - edit-patch: add/edit a patch for a source package and commit the changes. [quilt | dpatch | cdbs] - getbuildlog: download package build logs from Debian auto-builders. [wget] - git-deborig: try to produce Debian orig.tar using git-archive(1). [libdpkg-perl, libgit-wrapper-perl, liblist-compare-perl, libstring-shellquote-perl, libtry-tiny-perl] - grep-excuses: grep britney's excuses to find out what is happening to your packages. [libdbd-pg-perl, libterm-size-perl, libyaml-syck-perl, wget, w3m] - hardening-check: report the hardening characteristics of a set of binaries. - list-unreleased: searches for packages marked UNRELEASED in their changelog. - ltnu (Long Time No Upload): List all uploads of packages by the given uploader or maintainer and display them ordered by the last upload of that package, oldest uploads first. - manpage-alert: locate binaries without corresponding manpages. [man-db] - mass-bug: mass-file bug reports. [bsd-mailx | mailx] - mergechanges: merge .changes files from the same release but built on different architectures. - mk-build-deps: Given a package name and/or control file, generate a binary package which may be installed to satisfy the build-dependencies of the given package. [equivs] - mk-origtargz: Rename upstream tarball, optionally changing the compression and removing unwanted files. [libfile-which-perl, unzip, xz-utils, file] - namecheck: Check project names are not already taken. - nmudiff: prepare a diff of this version (presumably an NMU against the previously released version (as per the changelog) and submit the diff to the BTS. [patchutils, mutt] - origtargz: fetch the orig tarball of a Debian package from various sources, and unpack it. [pristine-tar] - plotchangelog: display information from a changelog graphically using gnuplot. [libtimedate-perl, gnuplot] - pts-subscribe: subscribe to the PTS (Package Tracking System) for a limited period of time. [bsd-mailx | mailx, at] - rc-alert: list installed packages which have release-critical bugs. [wget | curl] - reproducible-check: reports on the reproducible status of installed packages. For more details please see <https://reproducible-builds.org>. - rmadison: remotely query the Debian archive database about packages. [liburi-perl, wget | curl] - sadt: run DEP-8 tests. [python3-debian] - salsa: manipulates salsa.debian.org repositories and users [libgitlab-api-v4-perl] - suspicious-source: output a list of files which are not common source files. [python3-magic] - svnpath: Prints the path to the Subversion repository of a Subversion checkout. Also supports calculating the paths for branches and tags in a repository independent fashion. Used by debcommit to generate svn tags. [subversion] - tagpending: runs from a Debian source tree and tags bugs that are to be closed in the latest changelog as pending. [libsoap-lite-perl] - transition-check: Check a list of source packages for involvement in transitions for which uploads to unstable are currently blocked. [libwww-perl, libyaml-syck-perl] - uscan: Automatically scan for and download upstream updates. Uscan can also call a program such as uupdate to attempt to update the Debianised version based on the new update. Whilst uscan could be used to release the updated version automatically, it is probably better not to without testing it first. Uscan can also verify detached OpenPGP signatures if upstream's signing key is known. [file, gpgv | gpgv2, gnupg | gnupg2, libfile-dirlist-perl, libfile-touch-perl, libfile-which-perl, liblwp-protocol-https-perl, libmoo-perl, libwww-perl, unzip, xz-utils]* - uupdate: Update the package with an archive or patches from an upstream author. This will be of help if you have to update your package. It will try to apply the latest diffs to your package and tell you how successful it was. [patch] - what-patch: determine what patch system, if any, a source package is using. [patchutils] - whodepends: check which maintainers' packages depend on a package. - who-permits-upload: Retrieve information about Debian Maintainer access control lists. [gnupg | gnupg2, libencode-locale-perl, libwww-perl, debian-keyring] - who-uploads: determine the most recent uploaders of a package to the Debian archive. [gnupg | gnupg2, debian-keyring, debian-maintainers, wget] - wnpp-alert: list installed packages which are orphaned or up for adoption. [wget | curl] - wnpp-check: check whether there is an open request for packaging or intention to package bug for a package. [wget | curl] - wrap-and-sort: wrap long lines and sort items in packaging files. [python3-debian] - /usr/share/doc/devscripts/examples: This directory contains examples of procmail and exim scripts for sorting mail arriving to Debian mailing lists.
PackageMaintainer	Devscripts Maintainers <devscripts@packages.debian.org>
PackageName	devscripts
PackageSection	devel
PackageVersion	2.21.4~bpo11+1
SHA-1	19033F6044C53AED907656954EDAFBF27CEE3869
SHA-256	AE6BCA10258FA416EC8259B345FE567B852F1224B3C0902691BAE879CD9F6C33

Key	Value
FileSize	1092516
MD5	D45AD09D00E693335643D3E0FEC0F34A
PackageDescription	scripts to make the life of a Debian Package maintainer easier Contains the following scripts, dependencies/recommendations shown in brackets afterwards: . - annotate-output: run a command and prepend time and stream (O for stdout, E for stderr) for every line of output. - archpath: Prints arch (tla/Bazaar) package names. Also supports calculating the package names for other branches. [tla | bazaar] - bts: A command-line tool for accessing the Debian Bug Tracking System, both to send mails to control@bts.debian.org and to access the web pages and SOAP interface of the BTS. [www-browser, libauthen-sasl-perl, libnet-smtps-perl, libsoap-lite-perl, liburi-perl, libwww-perl, bsd-mailx | mailx] - build-rdeps: Searches for all packages that build-depend on a given package. [dctrl-tools, dose-extra, libdpkg-perl] - chdist: tool to easily play with several distributions. [dctrl-tools] - checkbashisms: check whether a /bin/sh script contains any common bash-specific constructs. - cowpoke: upload a Debian source package to a cowbuilder host and build it, optionally also signing and uploading the result to an incoming queue. [ssh-client] - cvs-debi, cvs-debc: wrappers around debi and debc respectively (see below) which allow them to be called from the CVS working directory. [cvs-buildpackage] - cvs-debrelease: wrapper around debrelease which allows it to be called from the CVS working directory. [cvs-buildpackage, dupload | dput, ssh-client] - cvs-debuild: A wrapper for cvs-buildpackage to use debuild as its package building program. [cvs-buildpackage, fakeroot, lintian, gnupg |gnupg2] - dcmd: run a given command replacing the name of a .changes or .dsc file with each of the files referenced therein. * - dd-list: given a list of packages, pretty-print it ordered by maintainer. * - debbisect: bisect snapshot.debian.org to find which change in the archive introduced a certain problem. [mmdebstrap, python3-debian] - debc: List contents of current package. Do this after a successful "debuild" to see if the package looks all right. - debchange (abbreviation dch): Modifies debian/changelog and manages version numbers for you. It will either increment the version number or add an entry for the current version, depending upon the options given to it. [libdistro-info-perl, libsoap-lite-perl]* - debcheckout: checkout the development repository of a Debian package. * - debclean: Clean a Debian source tree. Debclean will clean all Debian source trees below the current directory, and if requested, also remove all files that were generated from these source trees (that is .deb, .dsc and .changes files). It will keep the .diffs and original files, though, so that the binaries and other files can be rebuilt if necessary. [fakeroot]* - debcommit: Commits changes to cvs, darcs, svn, svk, tla, bzr, git, or hg, using new entries in debian/changelog as the commit message. Also supports tagging Debian package releases. [cvs | darcs | subversion | svk | tla | bzr | git-core | mercurial, libtimedate-perl] - debdiff: A program which examines two .deb files or two .changes files and reports on any difference found in their file lists. Useful for ensuring that no files were inadvertently lost between versions. Can also examine two .dsc files and report on the changes between source versions. For a deeper comparison one can use the diffoscope package. [wdiff, patchutils]* - debdiff-apply: Apply unified diffs of two Debian source packages, such as those generated by debdiff, to a target Debian source package. Any changes to debian/changelog are dealt with specially, to avoid the conflicts that changelog diffs typically produce when applied naively. May be used to check that old patches still apply to newer versions of those packages. [python3-debian, python3-unidiff, quilt] - debi: Installs the current package by using the setuid root debpkg script described below. It assumes that the current package has just been built (for example by debuild), and the .deb lives in the parent directory, and will effectively run dpkg -i on the .deb. The ability to install the package with a very short command is very useful when troubleshooting packages. - debpkg: A wrapper for dpkg used by debi to allow convenient testing of packages. For debpkg to work, it needs to be made setuid root, and this needs to be performed by the sysadmin -- it is not installed as setuid root by default. (Note that being able to run a setuid root debpkg is effectively the same as having root access to the system, so this should be done with caution.) Having debpkg as a wrapper for dpkg can be a Good Thing (TM), as it decreases the potential for damage by accidental wrong use of commands in superuser mode (e.g., an inadvertent rm -rf * in the wrong directory is disastrous as many can attest to). - debrelease: A wrapper around dupload or dput which figures out which version to upload, and then calls dupload or dput to actually perform the upload. [dupload | dput, ssh-client] - debrebuild: A script that provided a .buildinfo file reports the instructions on how to try to reproduce the reported build. [sbuild | mmdebstrap, libdistro-info-perl] - debrepro: A script that tests reproducibility of Debian packages. It will build a given source directory twice, with a set of variation between the first and second build, and compare the binary packages produced. If diffoscope is installed, it is used to compare non-matching binaries. If disorderfs is installed, it is used during the build to inject non-determinism in filesystem listing operations. [faketime, diffoscope, disorderfs] - debrsign: This transfers a .changes/.dsc pair to a remote machine for signing, and runs debsign on the remote machine over an SSH connection. [gnupg | gnupg2, debian-keyring, ssh-client] - debsign: Use GNU Privacy Guard to sign the changes (and possibly dsc) files created by running dpkg-buildpackage with no-sign options. Useful if you are building a package on a remote machine and wish to sign it on a local one. This script is capable of automatically downloading the .changes and .dsc files from a remote machine. [gnupg |gnupg2, debian-keyring, ssh-client]* - debsnap: grab packages from https://snapshot.debian.org [libwww-perl, libjson-perl] - debuild: A wrapper for building a package (i.e., dpkg-buildpackage) to avoid problems with insufficient permissions and wrong paths etc. Debuild will set up the proper environment for building a package. Debuild will use the fakeroot program to build the package by default, but can be instructed to use any other gain-root command, or can even be installed setuid root. Debuild can also be used to run various of the debian/rules operations with the same root-gaining procedure. Debuild will also run lintian to check that the package does not have any major policy violations. [fakeroot, lintian, gnupg | gnupg2]* - deb-reversion: increases a binary package version number and repacks the package, useful for porters and the like. - deb-why-removed: shows the reason a package was removed from the archive. [libdpkg-perl] - dep3changelog: generate a changelog entry from a DEP3-style patch header. - desktop2menu: given a freedesktop.org desktop file, generate a skeleton for a menu file. [libfile-desktopentry-perl] - dget: Downloads Debian source and binary packages. Point at a .changes or .dsc to download all references files. Specify a package name to download it from the configured apt repository. [wget | curl] - diff2patches: extracts patches from a .diff.gz file placing them under debian/ or, if present, debian/patches. [patchutils] - dpkg-depcheck, dpkg-genbuilddeps: Runs a specified command (such as debian/rules build) or dpkg-buildpackage, respectively, to determine the packages used during the build process. This information can be helpful when trying to determine the packages needed in the Build-Depends etc. lines in the debian/control file. [build-essential, strace] - dscextract: extract a single file from a Debian source package. [patchutils] - dscverify: check the signature and MD5 sums of a dsc file against the most current Debian keyring on your system. [gnupg | gnupg2, debian-keyring] - edit-patch: add/edit a patch for a source package and commit the changes. [quilt | dpatch | cdbs] - getbuildlog: download package build logs from Debian auto-builders. [wget] - git-deborig: try to produce Debian orig.tar using git-archive(1). [libdpkg-perl, libgit-wrapper-perl, liblist-compare-perl, libstring-shellquote-perl, libtry-tiny-perl] - grep-excuses: grep britney's excuses to find out what is happening to your packages. [libdbd-pg-perl, libterm-size-perl, libyaml-syck-perl, wget, w3m] - hardening-check: report the hardening characteristics of a set of binaries. - list-unreleased: searches for packages marked UNRELEASED in their changelog. - ltnu (Long Time No Upload): List all uploads of packages by the given uploader or maintainer and display them ordered by the last upload of that package, oldest uploads first. - manpage-alert: locate binaries without corresponding manpages. [man-db] - mass-bug: mass-file bug reports. [bsd-mailx | mailx] - mergechanges: merge .changes files from the same release but built on different architectures. - mk-build-deps: Given a package name and/or control file, generate a binary package which may be installed to satisfy the build-dependencies of the given package. [equivs] - mk-origtargz: Rename upstream tarball, optionally changing the compression and removing unwanted files. [libfile-which-perl, unzip, xz-utils, file] - namecheck: Check project names are not already taken. - nmudiff: prepare a diff of this version (presumably an NMU against the previously released version (as per the changelog) and submit the diff to the BTS. [patchutils, mutt] - origtargz: fetch the orig tarball of a Debian package from various sources, and unpack it. [pristine-tar] - plotchangelog: display information from a changelog graphically using gnuplot. [libtimedate-perl, gnuplot] - pts-subscribe: subscribe to the PTS (Package Tracking System) for a limited period of time. [bsd-mailx | mailx, at] - rc-alert: list installed packages which have release-critical bugs. [wget | curl] - reproducible-check: reports on the reproducible status of installed packages. For more details please see <https://reproducible-builds.org>. - rmadison: remotely query the Debian archive database about packages. [liburi-perl, wget | curl] - sadt: run DEP-8 tests. [python3-debian] - salsa: manipulates salsa.debian.org repositories and users [libgitlab-api-v4-perl] - suspicious-source: output a list of files which are not common source files. [python3-magic] - svnpath: Prints the path to the Subversion repository of a Subversion checkout. Also supports calculating the paths for branches and tags in a repository independent fashion. Used by debcommit to generate svn tags. [subversion] - tagpending: runs from a Debian source tree and tags bugs that are to be closed in the latest changelog as pending. [libsoap-lite-perl] - transition-check: Check a list of source packages for involvement in transitions for which uploads to unstable are currently blocked. [libwww-perl, libyaml-syck-perl] - uscan: Automatically scan for and download upstream updates. Uscan can also call a program such as uupdate to attempt to update the Debianised version based on the new update. Whilst uscan could be used to release the updated version automatically, it is probably better not to without testing it first. Uscan can also verify detached OpenPGP signatures if upstream's signing key is known. [file, gpgv | gpgv2, gnupg | gnupg2, libfile-dirlist-perl, libfile-touch-perl, libfile-which-perl, liblwp-protocol-https-perl, libmoo-perl, libwww-perl, unzip, xz-utils]* - uupdate: Update the package with an archive or patches from an upstream author. This will be of help if you have to update your package. It will try to apply the latest diffs to your package and tell you how successful it was. [patch] - what-patch: determine what patch system, if any, a source package is using. [patchutils] - whodepends: check which maintainers' packages depend on a package. - who-permits-upload: Retrieve information about Debian Maintainer access control lists. [gnupg | gnupg2, libencode-locale-perl, libwww-perl, debian-keyring] - who-uploads: determine the most recent uploaders of a package to the Debian archive. [gnupg | gnupg2, debian-keyring, debian-maintainers, wget] - wnpp-alert: list installed packages which are orphaned or up for adoption. [wget | curl] - wnpp-check: check whether there is an open request for packaging or intention to package bug for a package. [wget | curl] - wrap-and-sort: wrap long lines and sort items in packaging files. [python3-debian] - /usr/share/doc/devscripts/examples: This directory contains examples of procmail and exim scripts for sorting mail arriving to Debian mailing lists.
PackageMaintainer	Devscripts Maintainers <devscripts@packages.debian.org>
PackageName	devscripts
PackageSection	devel
PackageVersion	2.21.3+deb11u1
SHA-1	1E55FDA72177F79B1F117C786A205C25644DD7D0
SHA-256	90C442893AA007B43B9DB6AF365BC681F4DA376F3107C5A9EF828FEC2DD475CA

Key	Value
FileSize	1092356
MD5	F7F0D07A40AA6ACF770F73272D4A7FCE
PackageDescription	scripts to make the life of a Debian Package maintainer easier Contains the following scripts, dependencies/recommendations shown in brackets afterwards: . - annotate-output: run a command and prepend time and stream (O for stdout, E for stderr) for every line of output. - archpath: Prints arch (tla/Bazaar) package names. Also supports calculating the package names for other branches. [tla | bazaar] - bts: A command-line tool for accessing the Debian Bug Tracking System, both to send mails to control@bts.debian.org and to access the web pages and SOAP interface of the BTS. [www-browser, libauthen-sasl-perl, libnet-smtps-perl, libsoap-lite-perl, liburi-perl, libwww-perl, bsd-mailx | mailx] - build-rdeps: Searches for all packages that build-depend on a given package. [dctrl-tools, dose-extra, libdpkg-perl] - chdist: tool to easily play with several distributions. [dctrl-tools] - checkbashisms: check whether a /bin/sh script contains any common bash-specific constructs. - cowpoke: upload a Debian source package to a cowbuilder host and build it, optionally also signing and uploading the result to an incoming queue. [ssh-client] - cvs-debi, cvs-debc: wrappers around debi and debc respectively (see below) which allow them to be called from the CVS working directory. [cvs-buildpackage] - cvs-debrelease: wrapper around debrelease which allows it to be called from the CVS working directory. [cvs-buildpackage, dupload | dput, ssh-client] - cvs-debuild: A wrapper for cvs-buildpackage to use debuild as its package building program. [cvs-buildpackage, fakeroot, lintian, gnupg |gnupg2] - dcmd: run a given command replacing the name of a .changes or .dsc file with each of the files referenced therein. * - dd-list: given a list of packages, pretty-print it ordered by maintainer. * - debbisect: bisect snapshot.debian.org to find which change in the archive introduced a certain problem. [mmdebstrap, python3-debian] - debc: List contents of current package. Do this after a successful "debuild" to see if the package looks all right. - debchange (abbreviation dch): Modifies debian/changelog and manages version numbers for you. It will either increment the version number or add an entry for the current version, depending upon the options given to it. [libdistro-info-perl, libsoap-lite-perl]* - debcheckout: checkout the development repository of a Debian package. * - debclean: Clean a Debian source tree. Debclean will clean all Debian source trees below the current directory, and if requested, also remove all files that were generated from these source trees (that is .deb, .dsc and .changes files). It will keep the .diffs and original files, though, so that the binaries and other files can be rebuilt if necessary. [fakeroot]* - debcommit: Commits changes to cvs, darcs, svn, svk, tla, bzr, git, or hg, using new entries in debian/changelog as the commit message. Also supports tagging Debian package releases. [cvs | darcs | subversion | svk | tla | bzr | git-core | mercurial, libtimedate-perl] - debdiff: A program which examines two .deb files or two .changes files and reports on any difference found in their file lists. Useful for ensuring that no files were inadvertently lost between versions. Can also examine two .dsc files and report on the changes between source versions. For a deeper comparison one can use the diffoscope package. [wdiff, patchutils]* - debdiff-apply: Apply unified diffs of two Debian source packages, such as those generated by debdiff, to a target Debian source package. Any changes to debian/changelog are dealt with specially, to avoid the conflicts that changelog diffs typically produce when applied naively. May be used to check that old patches still apply to newer versions of those packages. [python3-debian, python3-unidiff, quilt] - debi: Installs the current package by using the setuid root debpkg script described below. It assumes that the current package has just been built (for example by debuild), and the .deb lives in the parent directory, and will effectively run dpkg -i on the .deb. The ability to install the package with a very short command is very useful when troubleshooting packages. - debpkg: A wrapper for dpkg used by debi to allow convenient testing of packages. For debpkg to work, it needs to be made setuid root, and this needs to be performed by the sysadmin -- it is not installed as setuid root by default. (Note that being able to run a setuid root debpkg is effectively the same as having root access to the system, so this should be done with caution.) Having debpkg as a wrapper for dpkg can be a Good Thing (TM), as it decreases the potential for damage by accidental wrong use of commands in superuser mode (e.g., an inadvertent rm -rf * in the wrong directory is disastrous as many can attest to). - debrelease: A wrapper around dupload or dput which figures out which version to upload, and then calls dupload or dput to actually perform the upload. [dupload | dput, ssh-client] - debrebuild: A script that provided a .buildinfo file reports the instructions on how to try to reproduce the reported build. [sbuild | mmdebstrap, libdistro-info-perl] - debrepro: A script that tests reproducibility of Debian packages. It will build a given source directory twice, with a set of variation between the first and second build, and compare the binary packages produced. If diffoscope is installed, it is used to compare non-matching binaries. If disorderfs is installed, it is used during the build to inject non-determinism in filesystem listing operations. [faketime, diffoscope, disorderfs] - debrsign: This transfers a .changes/.dsc pair to a remote machine for signing, and runs debsign on the remote machine over an SSH connection. [gnupg | gnupg2, debian-keyring, ssh-client] - debsign: Use GNU Privacy Guard to sign the changes (and possibly dsc) files created by running dpkg-buildpackage with no-sign options. Useful if you are building a package on a remote machine and wish to sign it on a local one. This script is capable of automatically downloading the .changes and .dsc files from a remote machine. [gnupg |gnupg2, debian-keyring, ssh-client]* - debsnap: grab packages from https://snapshot.debian.org [libwww-perl, libjson-perl] - debuild: A wrapper for building a package (i.e., dpkg-buildpackage) to avoid problems with insufficient permissions and wrong paths etc. Debuild will set up the proper environment for building a package. Debuild will use the fakeroot program to build the package by default, but can be instructed to use any other gain-root command, or can even be installed setuid root. Debuild can also be used to run various of the debian/rules operations with the same root-gaining procedure. Debuild will also run lintian to check that the package does not have any major policy violations. [fakeroot, lintian, gnupg | gnupg2]* - deb-reversion: increases a binary package version number and repacks the package, useful for porters and the like. - deb-why-removed: shows the reason a package was removed from the archive. [libdpkg-perl] - dep3changelog: generate a changelog entry from a DEP3-style patch header. - desktop2menu: given a freedesktop.org desktop file, generate a skeleton for a menu file. [libfile-desktopentry-perl] - dget: Downloads Debian source and binary packages. Point at a .changes or .dsc to download all references files. Specify a package name to download it from the configured apt repository. [wget | curl] - diff2patches: extracts patches from a .diff.gz file placing them under debian/ or, if present, debian/patches. [patchutils] - dpkg-depcheck, dpkg-genbuilddeps: Runs a specified command (such as debian/rules build) or dpkg-buildpackage, respectively, to determine the packages used during the build process. This information can be helpful when trying to determine the packages needed in the Build-Depends etc. lines in the debian/control file. [build-essential, strace] - dscextract: extract a single file from a Debian source package. [patchutils] - dscverify: check the signature and MD5 sums of a dsc file against the most current Debian keyring on your system. [gnupg | gnupg2, debian-keyring] - edit-patch: add/edit a patch for a source package and commit the changes. [quilt | dpatch | cdbs] - getbuildlog: download package build logs from Debian auto-builders. [wget] - git-deborig: try to produce Debian orig.tar using git-archive(1). [libdpkg-perl, libgit-wrapper-perl, liblist-compare-perl, libstring-shellquote-perl, libtry-tiny-perl] - grep-excuses: grep britney's excuses to find out what is happening to your packages. [libdbd-pg-perl, libterm-size-perl, libyaml-syck-perl, wget, w3m] - hardening-check: report the hardening characteristics of a set of binaries. - list-unreleased: searches for packages marked UNRELEASED in their changelog. - ltnu (Long Time No Upload): List all uploads of packages by the given uploader or maintainer and display them ordered by the last upload of that package, oldest uploads first. - manpage-alert: locate binaries without corresponding manpages. [man-db] - mass-bug: mass-file bug reports. [bsd-mailx | mailx] - mergechanges: merge .changes files from the same release but built on different architectures. - mk-build-deps: Given a package name and/or control file, generate a binary package which may be installed to satisfy the build-dependencies of the given package. [equivs] - mk-origtargz: Rename upstream tarball, optionally changing the compression and removing unwanted files. [libfile-which-perl, unzip, xz-utils, file] - namecheck: Check project names are not already taken. - nmudiff: prepare a diff of this version (presumably an NMU against the previously released version (as per the changelog) and submit the diff to the BTS. [patchutils, mutt] - origtargz: fetch the orig tarball of a Debian package from various sources, and unpack it. [pristine-tar] - plotchangelog: display information from a changelog graphically using gnuplot. [libtimedate-perl, gnuplot] - pts-subscribe: subscribe to the PTS (Package Tracking System) for a limited period of time. [bsd-mailx | mailx, at] - rc-alert: list installed packages which have release-critical bugs. [wget | curl] - reproducible-check: reports on the reproducible status of installed packages. For more details please see <https://reproducible-builds.org>. - rmadison: remotely query the Debian archive database about packages. [liburi-perl, wget | curl] - sadt: run DEP-8 tests. [python3-debian] - salsa: manipulates salsa.debian.org repositories and users [libgitlab-api-v4-perl] - suspicious-source: output a list of files which are not common source files. [python3-magic] - svnpath: Prints the path to the Subversion repository of a Subversion checkout. Also supports calculating the paths for branches and tags in a repository independent fashion. Used by debcommit to generate svn tags. [subversion] - tagpending: runs from a Debian source tree and tags bugs that are to be closed in the latest changelog as pending. [libsoap-lite-perl] - transition-check: Check a list of source packages for involvement in transitions for which uploads to unstable are currently blocked. [libwww-perl, libyaml-syck-perl] - uscan: Automatically scan for and download upstream updates. Uscan can also call a program such as uupdate to attempt to update the Debianised version based on the new update. Whilst uscan could be used to release the updated version automatically, it is probably better not to without testing it first. Uscan can also verify detached OpenPGP signatures if upstream's signing key is known. [file, gpgv | gpgv2, gnupg | gnupg2, libfile-dirlist-perl, libfile-touch-perl, libfile-which-perl, liblwp-protocol-https-perl, libmoo-perl, libwww-perl, unzip, xz-utils]* - uupdate: Update the package with an archive or patches from an upstream author. This will be of help if you have to update your package. It will try to apply the latest diffs to your package and tell you how successful it was. [patch] - what-patch: determine what patch system, if any, a source package is using. [patchutils] - whodepends: check which maintainers' packages depend on a package. - who-permits-upload: Retrieve information about Debian Maintainer access control lists. [gnupg | gnupg2, libencode-locale-perl, libwww-perl, debian-keyring] - who-uploads: determine the most recent uploaders of a package to the Debian archive. [gnupg | gnupg2, debian-keyring, debian-maintainers, wget] - wnpp-alert: list installed packages which are orphaned or up for adoption. [wget | curl] - wnpp-check: check whether there is an open request for packaging or intention to package bug for a package. [wget | curl] - wrap-and-sort: wrap long lines and sort items in packaging files. [python3-debian] - /usr/share/doc/devscripts/examples: This directory contains examples of procmail and exim scripts for sorting mail arriving to Debian mailing lists.
PackageMaintainer	Devscripts Maintainers <devscripts@packages.debian.org>
PackageName	devscripts
PackageSection	devel
PackageVersion	2.21.3+deb11u1
SHA-1	23D350E6A6FC07840187F54B7B3ED0DEC7B346EE
SHA-256	C568302E500558FFA6B710D886EA86268B73234A6EF26C8BF817E3548E92E8A4

Key	Value
FileSize	1094016
MD5	7ACCD14297877435C37EAF14C66D00DC
PackageDescription	scripts to make the life of a Debian Package maintainer easier Contains the following scripts, dependencies/recommendations shown in brackets afterwards: . - annotate-output: run a command and prepend time and stream (O for stdout, E for stderr) for every line of output. - archpath: Prints arch (tla/Bazaar) package names. Also supports calculating the package names for other branches. [tla | bazaar] - bts: A command-line tool for accessing the Debian Bug Tracking System, both to send mails to control@bts.debian.org and to access the web pages and SOAP interface of the BTS. [www-browser, libauthen-sasl-perl, libnet-smtps-perl, libsoap-lite-perl, liburi-perl, libwww-perl, bsd-mailx | mailx] - build-rdeps: Searches for all packages that build-depend on a given package. [dctrl-tools, dose-extra, libdpkg-perl] - chdist: tool to easily play with several distributions. [dctrl-tools] - checkbashisms: check whether a /bin/sh script contains any common bash-specific constructs. - cowpoke: upload a Debian source package to a cowbuilder host and build it, optionally also signing and uploading the result to an incoming queue. [ssh-client] - cvs-debi, cvs-debc: wrappers around debi and debc respectively (see below) which allow them to be called from the CVS working directory. [cvs-buildpackage] - cvs-debrelease: wrapper around debrelease which allows it to be called from the CVS working directory. [cvs-buildpackage, dupload | dput, ssh-client] - cvs-debuild: A wrapper for cvs-buildpackage to use debuild as its package building program. [cvs-buildpackage, fakeroot, lintian, gnupg |gnupg2] - dcmd: run a given command replacing the name of a .changes or .dsc file with each of the files referenced therein. * - dd-list: given a list of packages, pretty-print it ordered by maintainer. * - debbisect: bisect snapshot.debian.org to find which change in the archive introduced a certain problem. [mmdebstrap, python3-debian] - debc: List contents of current package. Do this after a successful "debuild" to see if the package looks all right. - debchange (abbreviation dch): Modifies debian/changelog and manages version numbers for you. It will either increment the version number or add an entry for the current version, depending upon the options given to it. [libdistro-info-perl, libsoap-lite-perl]* - debcheckout: checkout the development repository of a Debian package. * - debclean: Clean a Debian source tree. Debclean will clean all Debian source trees below the current directory, and if requested, also remove all files that were generated from these source trees (that is .deb, .dsc and .changes files). It will keep the .diffs and original files, though, so that the binaries and other files can be rebuilt if necessary. [fakeroot]* - debcommit: Commits changes to cvs, darcs, svn, svk, tla, bzr, git, or hg, using new entries in debian/changelog as the commit message. Also supports tagging Debian package releases. [cvs | darcs | subversion | svk | tla | bzr | git-core | mercurial, libtimedate-perl] - debdiff: A program which examines two .deb files or two .changes files and reports on any difference found in their file lists. Useful for ensuring that no files were inadvertently lost between versions. Can also examine two .dsc files and report on the changes between source versions. For a deeper comparison one can use the diffoscope package. [wdiff, patchutils]* - debdiff-apply: Apply unified diffs of two Debian source packages, such as those generated by debdiff, to a target Debian source package. Any changes to debian/changelog are dealt with specially, to avoid the conflicts that changelog diffs typically produce when applied naively. May be used to check that old patches still apply to newer versions of those packages. [python3-debian, python3-unidiff, quilt] - debi: Installs the current package by using the setuid root debpkg script described below. It assumes that the current package has just been built (for example by debuild), and the .deb lives in the parent directory, and will effectively run dpkg -i on the .deb. The ability to install the package with a very short command is very useful when troubleshooting packages. - debpkg: A wrapper for dpkg used by debi to allow convenient testing of packages. For debpkg to work, it needs to be made setuid root, and this needs to be performed by the sysadmin -- it is not installed as setuid root by default. (Note that being able to run a setuid root debpkg is effectively the same as having root access to the system, so this should be done with caution.) Having debpkg as a wrapper for dpkg can be a Good Thing (TM), as it decreases the potential for damage by accidental wrong use of commands in superuser mode (e.g., an inadvertent rm -rf * in the wrong directory is disastrous as many can attest to). - debrelease: A wrapper around dupload or dput which figures out which version to upload, and then calls dupload or dput to actually perform the upload. [dupload | dput, ssh-client] - debrebuild: A script that provided a .buildinfo file reports the instructions on how to try to reproduce the reported build. [sbuild | mmdebstrap, libdistro-info-perl] - debrepro: A script that tests reproducibility of Debian packages. It will build a given source directory twice, with a set of variation between the first and second build, and compare the binary packages produced. If diffoscope is installed, it is used to compare non-matching binaries. If disorderfs is installed, it is used during the build to inject non-determinism in filesystem listing operations. [faketime, diffoscope, disorderfs] - debrsign: This transfers a .changes/.dsc pair to a remote machine for signing, and runs debsign on the remote machine over an SSH connection. [gnupg | gnupg2, debian-keyring, ssh-client] - debsign: Use GNU Privacy Guard to sign the changes (and possibly dsc) files created by running dpkg-buildpackage with no-sign options. Useful if you are building a package on a remote machine and wish to sign it on a local one. This script is capable of automatically downloading the .changes and .dsc files from a remote machine. [gnupg |gnupg2, debian-keyring, ssh-client]* - debsnap: grab packages from https://snapshot.debian.org [libwww-perl, libjson-perl] - debuild: A wrapper for building a package (i.e., dpkg-buildpackage) to avoid problems with insufficient permissions and wrong paths etc. Debuild will set up the proper environment for building a package. Debuild will use the fakeroot program to build the package by default, but can be instructed to use any other gain-root command, or can even be installed setuid root. Debuild can also be used to run various of the debian/rules operations with the same root-gaining procedure. Debuild will also run lintian to check that the package does not have any major policy violations. [fakeroot, lintian, gnupg | gnupg2]* - deb-reversion: increases a binary package version number and repacks the package, useful for porters and the like. - deb-why-removed: shows the reason a package was removed from the archive. [libdpkg-perl] - dep3changelog: generate a changelog entry from a DEP3-style patch header. - desktop2menu: given a freedesktop.org desktop file, generate a skeleton for a menu file. [libfile-desktopentry-perl] - dget: Downloads Debian source and binary packages. Point at a .changes or .dsc to download all references files. Specify a package name to download it from the configured apt repository. [wget | curl] - diff2patches: extracts patches from a .diff.gz file placing them under debian/ or, if present, debian/patches. [patchutils] - dpkg-depcheck, dpkg-genbuilddeps: Runs a specified command (such as debian/rules build) or dpkg-buildpackage, respectively, to determine the packages used during the build process. This information can be helpful when trying to determine the packages needed in the Build-Depends etc. lines in the debian/control file. [build-essential, strace] - dscextract: extract a single file from a Debian source package. [patchutils] - dscverify: check the signature and MD5 sums of a dsc file against the most current Debian keyring on your system. [gnupg | gnupg2, debian-keyring] - edit-patch: add/edit a patch for a source package and commit the changes. [quilt | dpatch | cdbs] - getbuildlog: download package build logs from Debian auto-builders. [wget] - git-deborig: try to produce Debian orig.tar using git-archive(1). [libdpkg-perl, libgit-wrapper-perl, liblist-compare-perl, libstring-shellquote-perl, libtry-tiny-perl] - grep-excuses: grep britney's excuses to find out what is happening to your packages. [libdbd-pg-perl, libterm-size-perl, libyaml-syck-perl, wget, w3m] - hardening-check: report the hardening characteristics of a set of binaries. - list-unreleased: searches for packages marked UNRELEASED in their changelog. - ltnu (Long Time No Upload): List all uploads of packages by the given uploader or maintainer and display them ordered by the last upload of that package, oldest uploads first. - manpage-alert: locate binaries without corresponding manpages. [man-db] - mass-bug: mass-file bug reports. [bsd-mailx | mailx] - mergechanges: merge .changes files from the same release but built on different architectures. - mk-build-deps: Given a package name and/or control file, generate a binary package which may be installed to satisfy the build-dependencies of the given package. [equivs] - mk-origtargz: Rename upstream tarball, optionally changing the compression and removing unwanted files. [libfile-which-perl, unzip, xz-utils, file] - namecheck: Check project names are not already taken. - nmudiff: prepare a diff of this version (presumably an NMU against the previously released version (as per the changelog) and submit the diff to the BTS. [patchutils, mutt] - origtargz: fetch the orig tarball of a Debian package from various sources, and unpack it. [pristine-tar] - plotchangelog: display information from a changelog graphically using gnuplot. [libtimedate-perl, gnuplot] - pts-subscribe: subscribe to the PTS (Package Tracking System) for a limited period of time. [bsd-mailx | mailx, at] - rc-alert: list installed packages which have release-critical bugs. [wget | curl] - reproducible-check: reports on the reproducible status of installed packages. For more details please see <https://reproducible-builds.org>. - rmadison: remotely query the Debian archive database about packages. [liburi-perl, wget | curl] - sadt: run DEP-8 tests. [python3-debian] - salsa: manipulates salsa.debian.org repositories and users [libgitlab-api-v4-perl] - suspicious-source: output a list of files which are not common source files. [python3-magic] - svnpath: Prints the path to the Subversion repository of a Subversion checkout. Also supports calculating the paths for branches and tags in a repository independent fashion. Used by debcommit to generate svn tags. [subversion] - tagpending: runs from a Debian source tree and tags bugs that are to be closed in the latest changelog as pending. [libsoap-lite-perl] - transition-check: Check a list of source packages for involvement in transitions for which uploads to unstable are currently blocked. [libwww-perl, libyaml-syck-perl] - uscan: Automatically scan for and download upstream updates. Uscan can also call a program such as uupdate to attempt to update the Debianised version based on the new update. Whilst uscan could be used to release the updated version automatically, it is probably better not to without testing it first. Uscan can also verify detached OpenPGP signatures if upstream's signing key is known. [file, gpgv | gpgv2, gnupg | gnupg2, libfile-dirlist-perl, libfile-touch-perl, libfile-which-perl, liblwp-protocol-https-perl, libmoo-perl, libwww-perl, unzip, xz-utils]* - uupdate: Update the package with an archive or patches from an upstream author. This will be of help if you have to update your package. It will try to apply the latest diffs to your package and tell you how successful it was. [patch] - what-patch: determine what patch system, if any, a source package is using. [patchutils] - whodepends: check which maintainers' packages depend on a package. - who-permits-upload: Retrieve information about Debian Maintainer access control lists. [gnupg | gnupg2, libencode-locale-perl, libwww-perl, debian-keyring] - who-uploads: determine the most recent uploaders of a package to the Debian archive. [gnupg | gnupg2, debian-keyring, debian-maintainers, wget] - wnpp-alert: list installed packages which are orphaned or up for adoption. [wget | curl] - wnpp-check: check whether there is an open request for packaging or intention to package bug for a package. [wget | curl] - wrap-and-sort: wrap long lines and sort items in packaging files. [python3-debian] - /usr/share/doc/devscripts/examples: This directory contains examples of procmail and exim scripts for sorting mail arriving to Debian mailing lists.
PackageMaintainer	Devscripts Maintainers <devscripts@packages.debian.org>
PackageName	devscripts
PackageSection	devel
PackageVersion	2.21.4~bpo11+1
SHA-1	254D7062A7B226313A447FECE008FB895660EA22
SHA-256	5DF3FDF4B1DBAB6C0B59B7E9ED49004313D9E2E59BA175A40C43D2F07A57247E

Key	Value
FileSize	1092236
MD5	41EC7A1C5D722EE00CDF91D1825BFD49
PackageDescription	scripts to make the life of a Debian Package maintainer easier Contains the following scripts, dependencies/recommendations shown in brackets afterwards: . - annotate-output: run a command and prepend time and stream (O for stdout, E for stderr) for every line of output. - archpath: Prints arch (tla/Bazaar) package names. Also supports calculating the package names for other branches. [tla | bazaar] - bts: A command-line tool for accessing the Debian Bug Tracking System, both to send mails to control@bts.debian.org and to access the web pages and SOAP interface of the BTS. [www-browser, libauthen-sasl-perl, libnet-smtps-perl, libsoap-lite-perl, liburi-perl, libwww-perl, bsd-mailx | mailx] - build-rdeps: Searches for all packages that build-depend on a given package. [dctrl-tools, dose-extra, libdpkg-perl] - chdist: tool to easily play with several distributions. [dctrl-tools] - checkbashisms: check whether a /bin/sh script contains any common bash-specific constructs. - cowpoke: upload a Debian source package to a cowbuilder host and build it, optionally also signing and uploading the result to an incoming queue. [ssh-client] - cvs-debi, cvs-debc: wrappers around debi and debc respectively (see below) which allow them to be called from the CVS working directory. [cvs-buildpackage] - cvs-debrelease: wrapper around debrelease which allows it to be called from the CVS working directory. [cvs-buildpackage, dupload | dput, ssh-client] - cvs-debuild: A wrapper for cvs-buildpackage to use debuild as its package building program. [cvs-buildpackage, fakeroot, lintian, gnupg |gnupg2] - dcmd: run a given command replacing the name of a .changes or .dsc file with each of the files referenced therein. * - dd-list: given a list of packages, pretty-print it ordered by maintainer. * - debbisect: bisect snapshot.debian.org to find which change in the archive introduced a certain problem. [mmdebstrap, python3-debian] - debc: List contents of current package. Do this after a successful "debuild" to see if the package looks all right. - debchange (abbreviation dch): Modifies debian/changelog and manages version numbers for you. It will either increment the version number or add an entry for the current version, depending upon the options given to it. [libdistro-info-perl, libsoap-lite-perl]* - debcheckout: checkout the development repository of a Debian package. * - debclean: Clean a Debian source tree. Debclean will clean all Debian source trees below the current directory, and if requested, also remove all files that were generated from these source trees (that is .deb, .dsc and .changes files). It will keep the .diffs and original files, though, so that the binaries and other files can be rebuilt if necessary. [fakeroot]* - debcommit: Commits changes to cvs, darcs, svn, svk, tla, bzr, git, or hg, using new entries in debian/changelog as the commit message. Also supports tagging Debian package releases. [cvs | darcs | subversion | svk | tla | bzr | git-core | mercurial, libtimedate-perl] - debdiff: A program which examines two .deb files or two .changes files and reports on any difference found in their file lists. Useful for ensuring that no files were inadvertently lost between versions. Can also examine two .dsc files and report on the changes between source versions. For a deeper comparison one can use the diffoscope package. [wdiff, patchutils]* - debdiff-apply: Apply unified diffs of two Debian source packages, such as those generated by debdiff, to a target Debian source package. Any changes to debian/changelog are dealt with specially, to avoid the conflicts that changelog diffs typically produce when applied naively. May be used to check that old patches still apply to newer versions of those packages. [python3-debian, python3-unidiff, quilt] - debi: Installs the current package by using the setuid root debpkg script described below. It assumes that the current package has just been built (for example by debuild), and the .deb lives in the parent directory, and will effectively run dpkg -i on the .deb. The ability to install the package with a very short command is very useful when troubleshooting packages. - debpkg: A wrapper for dpkg used by debi to allow convenient testing of packages. For debpkg to work, it needs to be made setuid root, and this needs to be performed by the sysadmin -- it is not installed as setuid root by default. (Note that being able to run a setuid root debpkg is effectively the same as having root access to the system, so this should be done with caution.) Having debpkg as a wrapper for dpkg can be a Good Thing (TM), as it decreases the potential for damage by accidental wrong use of commands in superuser mode (e.g., an inadvertent rm -rf * in the wrong directory is disastrous as many can attest to). - debrelease: A wrapper around dupload or dput which figures out which version to upload, and then calls dupload or dput to actually perform the upload. [dupload | dput, ssh-client] - debrebuild: A script that provided a .buildinfo file reports the instructions on how to try to reproduce the reported build. [sbuild | mmdebstrap, libdistro-info-perl] - debrepro: A script that tests reproducibility of Debian packages. It will build a given source directory twice, with a set of variation between the first and second build, and compare the binary packages produced. If diffoscope is installed, it is used to compare non-matching binaries. If disorderfs is installed, it is used during the build to inject non-determinism in filesystem listing operations. [faketime, diffoscope, disorderfs] - debrsign: This transfers a .changes/.dsc pair to a remote machine for signing, and runs debsign on the remote machine over an SSH connection. [gnupg | gnupg2, debian-keyring, ssh-client] - debsign: Use GNU Privacy Guard to sign the changes (and possibly dsc) files created by running dpkg-buildpackage with no-sign options. Useful if you are building a package on a remote machine and wish to sign it on a local one. This script is capable of automatically downloading the .changes and .dsc files from a remote machine. [gnupg |gnupg2, debian-keyring, ssh-client]* - debsnap: grab packages from https://snapshot.debian.org [libwww-perl, libjson-perl] - debuild: A wrapper for building a package (i.e., dpkg-buildpackage) to avoid problems with insufficient permissions and wrong paths etc. Debuild will set up the proper environment for building a package. Debuild will use the fakeroot program to build the package by default, but can be instructed to use any other gain-root command, or can even be installed setuid root. Debuild can also be used to run various of the debian/rules operations with the same root-gaining procedure. Debuild will also run lintian to check that the package does not have any major policy violations. [fakeroot, lintian, gnupg | gnupg2]* - deb-reversion: increases a binary package version number and repacks the package, useful for porters and the like. - deb-why-removed: shows the reason a package was removed from the archive. [libdpkg-perl] - dep3changelog: generate a changelog entry from a DEP3-style patch header. - desktop2menu: given a freedesktop.org desktop file, generate a skeleton for a menu file. [libfile-desktopentry-perl] - dget: Downloads Debian source and binary packages. Point at a .changes or .dsc to download all references files. Specify a package name to download it from the configured apt repository. [wget | curl] - diff2patches: extracts patches from a .diff.gz file placing them under debian/ or, if present, debian/patches. [patchutils] - dpkg-depcheck, dpkg-genbuilddeps: Runs a specified command (such as debian/rules build) or dpkg-buildpackage, respectively, to determine the packages used during the build process. This information can be helpful when trying to determine the packages needed in the Build-Depends etc. lines in the debian/control file. [build-essential, strace] - dscextract: extract a single file from a Debian source package. [patchutils] - dscverify: check the signature and MD5 sums of a dsc file against the most current Debian keyring on your system. [gnupg | gnupg2, debian-keyring] - edit-patch: add/edit a patch for a source package and commit the changes. [quilt | dpatch | cdbs] - getbuildlog: download package build logs from Debian auto-builders. [wget] - git-deborig: try to produce Debian orig.tar using git-archive(1). [libdpkg-perl, libgit-wrapper-perl, liblist-compare-perl, libstring-shellquote-perl, libtry-tiny-perl] - grep-excuses: grep britney's excuses to find out what is happening to your packages. [libdbd-pg-perl, libterm-size-perl, libyaml-syck-perl, wget, w3m] - hardening-check: report the hardening characteristics of a set of binaries. - list-unreleased: searches for packages marked UNRELEASED in their changelog. - ltnu (Long Time No Upload): List all uploads of packages by the given uploader or maintainer and display them ordered by the last upload of that package, oldest uploads first. - manpage-alert: locate binaries without corresponding manpages. [man-db] - mass-bug: mass-file bug reports. [bsd-mailx | mailx] - mergechanges: merge .changes files from the same release but built on different architectures. - mk-build-deps: Given a package name and/or control file, generate a binary package which may be installed to satisfy the build-dependencies of the given package. [equivs] - mk-origtargz: Rename upstream tarball, optionally changing the compression and removing unwanted files. [libfile-which-perl, unzip, xz-utils, file] - namecheck: Check project names are not already taken. - nmudiff: prepare a diff of this version (presumably an NMU against the previously released version (as per the changelog) and submit the diff to the BTS. [patchutils, mutt] - origtargz: fetch the orig tarball of a Debian package from various sources, and unpack it. [pristine-tar] - plotchangelog: display information from a changelog graphically using gnuplot. [libtimedate-perl, gnuplot] - pts-subscribe: subscribe to the PTS (Package Tracking System) for a limited period of time. [bsd-mailx | mailx, at] - rc-alert: list installed packages which have release-critical bugs. [wget | curl] - reproducible-check: reports on the reproducible status of installed packages. For more details please see <https://reproducible-builds.org>. - rmadison: remotely query the Debian archive database about packages. [liburi-perl, wget | curl] - sadt: run DEP-8 tests. [python3-debian] - salsa: manipulates salsa.debian.org repositories and users [libgitlab-api-v4-perl] - suspicious-source: output a list of files which are not common source files. [python3-magic] - svnpath: Prints the path to the Subversion repository of a Subversion checkout. Also supports calculating the paths for branches and tags in a repository independent fashion. Used by debcommit to generate svn tags. [subversion] - tagpending: runs from a Debian source tree and tags bugs that are to be closed in the latest changelog as pending. [libsoap-lite-perl] - transition-check: Check a list of source packages for involvement in transitions for which uploads to unstable are currently blocked. [libwww-perl, libyaml-syck-perl] - uscan: Automatically scan for and download upstream updates. Uscan can also call a program such as uupdate to attempt to update the Debianised version based on the new update. Whilst uscan could be used to release the updated version automatically, it is probably better not to without testing it first. Uscan can also verify detached OpenPGP signatures if upstream's signing key is known. [file, gpgv | gpgv2, gnupg | gnupg2, libfile-dirlist-perl, libfile-touch-perl, libfile-which-perl, liblwp-protocol-https-perl, libmoo-perl, libwww-perl, unzip, xz-utils]* - uupdate: Update the package with an archive or patches from an upstream author. This will be of help if you have to update your package. It will try to apply the latest diffs to your package and tell you how successful it was. [patch] - what-patch: determine what patch system, if any, a source package is using. [patchutils] - whodepends: check which maintainers' packages depend on a package. - who-permits-upload: Retrieve information about Debian Maintainer access control lists. [gnupg | gnupg2, libencode-locale-perl, libwww-perl, debian-keyring] - who-uploads: determine the most recent uploaders of a package to the Debian archive. [gnupg | gnupg2, debian-keyring, debian-maintainers, wget] - wnpp-alert: list installed packages which are orphaned or up for adoption. [wget | curl] - wnpp-check: check whether there is an open request for packaging or intention to package bug for a package. [wget | curl] - wrap-and-sort: wrap long lines and sort items in packaging files. [python3-debian] - /usr/share/doc/devscripts/examples: This directory contains examples of procmail and exim scripts for sorting mail arriving to Debian mailing lists.
PackageMaintainer	Devscripts Maintainers <devscripts@packages.debian.org>
PackageName	devscripts
PackageSection	devel
PackageVersion	2.21.3+deb11u1
SHA-1	5395724B4BA13930F1167B0B3EE8B877129E9BD9
SHA-256	ABAE75764D6DA743822DEB717428A56859B5B6949B4ED16670E4FC22206EDA5E

Key	Value
FileSize	1092904
MD5	207D0AA7DB759C62EF15D83E3BD34E07
PackageDescription	scripts to make the life of a Debian Package maintainer easier Contains the following scripts, dependencies/recommendations shown in brackets afterwards: . - annotate-output: run a command and prepend time and stream (O for stdout, E for stderr) for every line of output. - archpath: Prints arch (tla/Bazaar) package names. Also supports calculating the package names for other branches. [tla | bazaar] - bts: A command-line tool for accessing the Debian Bug Tracking System, both to send mails to control@bts.debian.org and to access the web pages and SOAP interface of the BTS. [www-browser, libauthen-sasl-perl, libnet-smtps-perl, libsoap-lite-perl, liburi-perl, libwww-perl, bsd-mailx | mailx] - build-rdeps: Searches for all packages that build-depend on a given package. [dctrl-tools, dose-extra, libdpkg-perl] - chdist: tool to easily play with several distributions. [dctrl-tools] - checkbashisms: check whether a /bin/sh script contains any common bash-specific constructs. - cowpoke: upload a Debian source package to a cowbuilder host and build it, optionally also signing and uploading the result to an incoming queue. [ssh-client] - cvs-debi, cvs-debc: wrappers around debi and debc respectively (see below) which allow them to be called from the CVS working directory. [cvs-buildpackage] - cvs-debrelease: wrapper around debrelease which allows it to be called from the CVS working directory. [cvs-buildpackage, dupload | dput, ssh-client] - cvs-debuild: A wrapper for cvs-buildpackage to use debuild as its package building program. [cvs-buildpackage, fakeroot, lintian, gnupg |gnupg2] - dcmd: run a given command replacing the name of a .changes or .dsc file with each of the files referenced therein. * - dd-list: given a list of packages, pretty-print it ordered by maintainer. * - debbisect: bisect snapshot.debian.org to find which change in the archive introduced a certain problem. [mmdebstrap, python3-debian] - debc: List contents of current package. Do this after a successful "debuild" to see if the package looks all right. - debchange (abbreviation dch): Modifies debian/changelog and manages version numbers for you. It will either increment the version number or add an entry for the current version, depending upon the options given to it. [libdistro-info-perl, libsoap-lite-perl]* - debcheckout: checkout the development repository of a Debian package. * - debclean: Clean a Debian source tree. Debclean will clean all Debian source trees below the current directory, and if requested, also remove all files that were generated from these source trees (that is .deb, .dsc and .changes files). It will keep the .diffs and original files, though, so that the binaries and other files can be rebuilt if necessary. [fakeroot]* - debcommit: Commits changes to cvs, darcs, svn, svk, tla, bzr, git, or hg, using new entries in debian/changelog as the commit message. Also supports tagging Debian package releases. [cvs | darcs | subversion | svk | tla | bzr | git-core | mercurial, libtimedate-perl] - debdiff: A program which examines two .deb files or two .changes files and reports on any difference found in their file lists. Useful for ensuring that no files were inadvertently lost between versions. Can also examine two .dsc files and report on the changes between source versions. For a deeper comparison one can use the diffoscope package. [wdiff, patchutils]* - debdiff-apply: Apply unified diffs of two Debian source packages, such as those generated by debdiff, to a target Debian source package. Any changes to debian/changelog are dealt with specially, to avoid the conflicts that changelog diffs typically produce when applied naively. May be used to check that old patches still apply to newer versions of those packages. [python3-debian, python3-unidiff, quilt] - debi: Installs the current package by using the setuid root debpkg script described below. It assumes that the current package has just been built (for example by debuild), and the .deb lives in the parent directory, and will effectively run dpkg -i on the .deb. The ability to install the package with a very short command is very useful when troubleshooting packages. - debpkg: A wrapper for dpkg used by debi to allow convenient testing of packages. For debpkg to work, it needs to be made setuid root, and this needs to be performed by the sysadmin -- it is not installed as setuid root by default. (Note that being able to run a setuid root debpkg is effectively the same as having root access to the system, so this should be done with caution.) Having debpkg as a wrapper for dpkg can be a Good Thing (TM), as it decreases the potential for damage by accidental wrong use of commands in superuser mode (e.g., an inadvertent rm -rf * in the wrong directory is disastrous as many can attest to). - debrelease: A wrapper around dupload or dput which figures out which version to upload, and then calls dupload or dput to actually perform the upload. [dupload | dput, ssh-client] - debrebuild: A script that provided a .buildinfo file reports the instructions on how to try to reproduce the reported build. [sbuild | mmdebstrap, libdistro-info-perl] - debrepro: A script that tests reproducibility of Debian packages. It will build a given source directory twice, with a set of variation between the first and second build, and compare the binary packages produced. If diffoscope is installed, it is used to compare non-matching binaries. If disorderfs is installed, it is used during the build to inject non-determinism in filesystem listing operations. [faketime, diffoscope, disorderfs] - debrsign: This transfers a .changes/.dsc pair to a remote machine for signing, and runs debsign on the remote machine over an SSH connection. [gnupg | gnupg2, debian-keyring, ssh-client] - debsign: Use GNU Privacy Guard to sign the changes (and possibly dsc) files created by running dpkg-buildpackage with no-sign options. Useful if you are building a package on a remote machine and wish to sign it on a local one. This script is capable of automatically downloading the .changes and .dsc files from a remote machine. [gnupg |gnupg2, debian-keyring, ssh-client]* - debsnap: grab packages from https://snapshot.debian.org [libwww-perl, libjson-perl] - debuild: A wrapper for building a package (i.e., dpkg-buildpackage) to avoid problems with insufficient permissions and wrong paths etc. Debuild will set up the proper environment for building a package. Debuild will use the fakeroot program to build the package by default, but can be instructed to use any other gain-root command, or can even be installed setuid root. Debuild can also be used to run various of the debian/rules operations with the same root-gaining procedure. Debuild will also run lintian to check that the package does not have any major policy violations. [fakeroot, lintian, gnupg | gnupg2]* - deb-reversion: increases a binary package version number and repacks the package, useful for porters and the like. - deb-why-removed: shows the reason a package was removed from the archive. [libdpkg-perl] - dep3changelog: generate a changelog entry from a DEP3-style patch header. - desktop2menu: given a freedesktop.org desktop file, generate a skeleton for a menu file. [libfile-desktopentry-perl] - dget: Downloads Debian source and binary packages. Point at a .changes or .dsc to download all references files. Specify a package name to download it from the configured apt repository. [wget | curl] - diff2patches: extracts patches from a .diff.gz file placing them under debian/ or, if present, debian/patches. [patchutils] - dpkg-depcheck, dpkg-genbuilddeps: Runs a specified command (such as debian/rules build) or dpkg-buildpackage, respectively, to determine the packages used during the build process. This information can be helpful when trying to determine the packages needed in the Build-Depends etc. lines in the debian/control file. [build-essential, strace] - dscextract: extract a single file from a Debian source package. [patchutils] - dscverify: check the signature and MD5 sums of a dsc file against the most current Debian keyring on your system. [gnupg | gnupg2, debian-keyring] - edit-patch: add/edit a patch for a source package and commit the changes. [quilt | dpatch | cdbs] - getbuildlog: download package build logs from Debian auto-builders. [wget] - git-deborig: try to produce Debian orig.tar using git-archive(1). [libdpkg-perl, libgit-wrapper-perl, liblist-compare-perl, libstring-shellquote-perl, libtry-tiny-perl] - grep-excuses: grep britney's excuses to find out what is happening to your packages. [libdbd-pg-perl, libterm-size-perl, libyaml-syck-perl, wget, w3m] - hardening-check: report the hardening characteristics of a set of binaries. - list-unreleased: searches for packages marked UNRELEASED in their changelog. - ltnu (Long Time No Upload): List all uploads of packages by the given uploader or maintainer and display them ordered by the last upload of that package, oldest uploads first. - manpage-alert: locate binaries without corresponding manpages. [man-db] - mass-bug: mass-file bug reports. [bsd-mailx | mailx] - mergechanges: merge .changes files from the same release but built on different architectures. - mk-build-deps: Given a package name and/or control file, generate a binary package which may be installed to satisfy the build-dependencies of the given package. [equivs] - mk-origtargz: Rename upstream tarball, optionally changing the compression and removing unwanted files. [libfile-which-perl, unzip, xz-utils, file] - namecheck: Check project names are not already taken. - nmudiff: prepare a diff of this version (presumably an NMU against the previously released version (as per the changelog) and submit the diff to the BTS. [patchutils, mutt] - origtargz: fetch the orig tarball of a Debian package from various sources, and unpack it. [pristine-tar] - plotchangelog: display information from a changelog graphically using gnuplot. [libtimedate-perl, gnuplot] - pts-subscribe: subscribe to the PTS (Package Tracking System) for a limited period of time. [bsd-mailx | mailx, at] - rc-alert: list installed packages which have release-critical bugs. [wget | curl] - reproducible-check: reports on the reproducible status of installed packages. For more details please see <https://reproducible-builds.org>. - rmadison: remotely query the Debian archive database about packages. [liburi-perl, wget | curl] - sadt: run DEP-8 tests. [python3-debian] - salsa: manipulates salsa.debian.org repositories and users [libgitlab-api-v4-perl] - suspicious-source: output a list of files which are not common source files. [python3-magic] - svnpath: Prints the path to the Subversion repository of a Subversion checkout. Also supports calculating the paths for branches and tags in a repository independent fashion. Used by debcommit to generate svn tags. [subversion] - tagpending: runs from a Debian source tree and tags bugs that are to be closed in the latest changelog as pending. [libsoap-lite-perl] - transition-check: Check a list of source packages for involvement in transitions for which uploads to unstable are currently blocked. [libwww-perl, libyaml-syck-perl] - uscan: Automatically scan for and download upstream updates. Uscan can also call a program such as uupdate to attempt to update the Debianised version based on the new update. Whilst uscan could be used to release the updated version automatically, it is probably better not to without testing it first. Uscan can also verify detached OpenPGP signatures if upstream's signing key is known. [file, gpgv | gpgv2, gnupg | gnupg2, libfile-dirlist-perl, libfile-touch-perl, libfile-which-perl, liblwp-protocol-https-perl, libmoo-perl, libwww-perl, unzip, xz-utils]* - uupdate: Update the package with an archive or patches from an upstream author. This will be of help if you have to update your package. It will try to apply the latest diffs to your package and tell you how successful it was. [patch] - what-patch: determine what patch system, if any, a source package is using. [patchutils] - whodepends: check which maintainers' packages depend on a package. - who-permits-upload: Retrieve information about Debian Maintainer access control lists. [gnupg | gnupg2, libencode-locale-perl, libwww-perl, debian-keyring] - who-uploads: determine the most recent uploaders of a package to the Debian archive. [gnupg | gnupg2, debian-keyring, debian-maintainers, wget] - wnpp-alert: list installed packages which are orphaned or up for adoption. [wget | curl] - wnpp-check: check whether there is an open request for packaging or intention to package bug for a package. [wget | curl] - wrap-and-sort: wrap long lines and sort items in packaging files. [python3-debian] - /usr/share/doc/devscripts/examples: This directory contains examples of procmail and exim scripts for sorting mail arriving to Debian mailing lists.
PackageMaintainer	Devscripts Maintainers <devscripts@packages.debian.org>
PackageName	devscripts
PackageSection	devel
PackageVersion	2.21.3+deb11u1
SHA-1	69F7F4D389AC26716E9D6155646383E3AB002EFE
SHA-256	339E48F23B85EC7733204DE5B1BE3B38406A23277B32AFA5011EBBC2D508B0F2

Key	Value
FileSize	1092584
MD5	7C9A6AD88D89709442D491ED6E41990E
PackageDescription	scripts to make the life of a Debian Package maintainer easier Contains the following scripts, dependencies/recommendations shown in brackets afterwards: . - annotate-output: run a command and prepend time and stream (O for stdout, E for stderr) for every line of output. - archpath: Prints arch (tla/Bazaar) package names. Also supports calculating the package names for other branches. [tla | bazaar] - bts: A command-line tool for accessing the Debian Bug Tracking System, both to send mails to control@bts.debian.org and to access the web pages and SOAP interface of the BTS. [www-browser, libauthen-sasl-perl, libnet-smtps-perl, libsoap-lite-perl, liburi-perl, libwww-perl, bsd-mailx | mailx] - build-rdeps: Searches for all packages that build-depend on a given package. [dctrl-tools, dose-extra, libdpkg-perl] - chdist: tool to easily play with several distributions. [dctrl-tools] - checkbashisms: check whether a /bin/sh script contains any common bash-specific constructs. - cowpoke: upload a Debian source package to a cowbuilder host and build it, optionally also signing and uploading the result to an incoming queue. [ssh-client] - cvs-debi, cvs-debc: wrappers around debi and debc respectively (see below) which allow them to be called from the CVS working directory. [cvs-buildpackage] - cvs-debrelease: wrapper around debrelease which allows it to be called from the CVS working directory. [cvs-buildpackage, dupload | dput, ssh-client] - cvs-debuild: A wrapper for cvs-buildpackage to use debuild as its package building program. [cvs-buildpackage, fakeroot, lintian, gnupg |gnupg2] - dcmd: run a given command replacing the name of a .changes or .dsc file with each of the files referenced therein. * - dd-list: given a list of packages, pretty-print it ordered by maintainer. * - debbisect: bisect snapshot.debian.org to find which change in the archive introduced a certain problem. [mmdebstrap, python3-debian] - debc: List contents of current package. Do this after a successful "debuild" to see if the package looks all right. - debchange (abbreviation dch): Modifies debian/changelog and manages version numbers for you. It will either increment the version number or add an entry for the current version, depending upon the options given to it. [libdistro-info-perl, libsoap-lite-perl]* - debcheckout: checkout the development repository of a Debian package. * - debclean: Clean a Debian source tree. Debclean will clean all Debian source trees below the current directory, and if requested, also remove all files that were generated from these source trees (that is .deb, .dsc and .changes files). It will keep the .diffs and original files, though, so that the binaries and other files can be rebuilt if necessary. [fakeroot]* - debcommit: Commits changes to cvs, darcs, svn, svk, tla, bzr, git, or hg, using new entries in debian/changelog as the commit message. Also supports tagging Debian package releases. [cvs | darcs | subversion | svk | tla | bzr | git-core | mercurial, libtimedate-perl] - debdiff: A program which examines two .deb files or two .changes files and reports on any difference found in their file lists. Useful for ensuring that no files were inadvertently lost between versions. Can also examine two .dsc files and report on the changes between source versions. For a deeper comparison one can use the diffoscope package. [wdiff, patchutils]* - debdiff-apply: Apply unified diffs of two Debian source packages, such as those generated by debdiff, to a target Debian source package. Any changes to debian/changelog are dealt with specially, to avoid the conflicts that changelog diffs typically produce when applied naively. May be used to check that old patches still apply to newer versions of those packages. [python3-debian, python3-unidiff, quilt] - debi: Installs the current package by using the setuid root debpkg script described below. It assumes that the current package has just been built (for example by debuild), and the .deb lives in the parent directory, and will effectively run dpkg -i on the .deb. The ability to install the package with a very short command is very useful when troubleshooting packages. - debpkg: A wrapper for dpkg used by debi to allow convenient testing of packages. For debpkg to work, it needs to be made setuid root, and this needs to be performed by the sysadmin -- it is not installed as setuid root by default. (Note that being able to run a setuid root debpkg is effectively the same as having root access to the system, so this should be done with caution.) Having debpkg as a wrapper for dpkg can be a Good Thing (TM), as it decreases the potential for damage by accidental wrong use of commands in superuser mode (e.g., an inadvertent rm -rf * in the wrong directory is disastrous as many can attest to). - debrelease: A wrapper around dupload or dput which figures out which version to upload, and then calls dupload or dput to actually perform the upload. [dupload | dput, ssh-client] - debrebuild: A script that provided a .buildinfo file reports the instructions on how to try to reproduce the reported build. [sbuild | mmdebstrap, libdistro-info-perl] - debrepro: A script that tests reproducibility of Debian packages. It will build a given source directory twice, with a set of variation between the first and second build, and compare the binary packages produced. If diffoscope is installed, it is used to compare non-matching binaries. If disorderfs is installed, it is used during the build to inject non-determinism in filesystem listing operations. [faketime, diffoscope, disorderfs] - debrsign: This transfers a .changes/.dsc pair to a remote machine for signing, and runs debsign on the remote machine over an SSH connection. [gnupg | gnupg2, debian-keyring, ssh-client] - debsign: Use GNU Privacy Guard to sign the changes (and possibly dsc) files created by running dpkg-buildpackage with no-sign options. Useful if you are building a package on a remote machine and wish to sign it on a local one. This script is capable of automatically downloading the .changes and .dsc files from a remote machine. [gnupg |gnupg2, debian-keyring, ssh-client]* - debsnap: grab packages from https://snapshot.debian.org [libwww-perl, libjson-perl] - debuild: A wrapper for building a package (i.e., dpkg-buildpackage) to avoid problems with insufficient permissions and wrong paths etc. Debuild will set up the proper environment for building a package. Debuild will use the fakeroot program to build the package by default, but can be instructed to use any other gain-root command, or can even be installed setuid root. Debuild can also be used to run various of the debian/rules operations with the same root-gaining procedure. Debuild will also run lintian to check that the package does not have any major policy violations. [fakeroot, lintian, gnupg | gnupg2]* - deb-reversion: increases a binary package version number and repacks the package, useful for porters and the like. - deb-why-removed: shows the reason a package was removed from the archive. [libdpkg-perl] - dep3changelog: generate a changelog entry from a DEP3-style patch header. - desktop2menu: given a freedesktop.org desktop file, generate a skeleton for a menu file. [libfile-desktopentry-perl] - dget: Downloads Debian source and binary packages. Point at a .changes or .dsc to download all references files. Specify a package name to download it from the configured apt repository. [wget | curl] - diff2patches: extracts patches from a .diff.gz file placing them under debian/ or, if present, debian/patches. [patchutils] - dpkg-depcheck, dpkg-genbuilddeps: Runs a specified command (such as debian/rules build) or dpkg-buildpackage, respectively, to determine the packages used during the build process. This information can be helpful when trying to determine the packages needed in the Build-Depends etc. lines in the debian/control file. [build-essential, strace] - dscextract: extract a single file from a Debian source package. [patchutils] - dscverify: check the signature and MD5 sums of a dsc file against the most current Debian keyring on your system. [gnupg | gnupg2, debian-keyring] - edit-patch: add/edit a patch for a source package and commit the changes. [quilt | dpatch | cdbs] - getbuildlog: download package build logs from Debian auto-builders. [wget] - git-deborig: try to produce Debian orig.tar using git-archive(1). [libdpkg-perl, libgit-wrapper-perl, liblist-compare-perl, libstring-shellquote-perl, libtry-tiny-perl] - grep-excuses: grep britney's excuses to find out what is happening to your packages. [libdbd-pg-perl, libterm-size-perl, libyaml-syck-perl, wget, w3m] - hardening-check: report the hardening characteristics of a set of binaries. - list-unreleased: searches for packages marked UNRELEASED in their changelog. - ltnu (Long Time No Upload): List all uploads of packages by the given uploader or maintainer and display them ordered by the last upload of that package, oldest uploads first. - manpage-alert: locate binaries without corresponding manpages. [man-db] - mass-bug: mass-file bug reports. [bsd-mailx | mailx] - mergechanges: merge .changes files from the same release but built on different architectures. - mk-build-deps: Given a package name and/or control file, generate a binary package which may be installed to satisfy the build-dependencies of the given package. [equivs] - mk-origtargz: Rename upstream tarball, optionally changing the compression and removing unwanted files. [libfile-which-perl, unzip, xz-utils, file] - namecheck: Check project names are not already taken. - nmudiff: prepare a diff of this version (presumably an NMU against the previously released version (as per the changelog) and submit the diff to the BTS. [patchutils, mutt] - origtargz: fetch the orig tarball of a Debian package from various sources, and unpack it. [pristine-tar] - plotchangelog: display information from a changelog graphically using gnuplot. [libtimedate-perl, gnuplot] - pts-subscribe: subscribe to the PTS (Package Tracking System) for a limited period of time. [bsd-mailx | mailx, at] - rc-alert: list installed packages which have release-critical bugs. [wget | curl] - reproducible-check: reports on the reproducible status of installed packages. For more details please see <https://reproducible-builds.org>. - rmadison: remotely query the Debian archive database about packages. [liburi-perl, wget | curl] - sadt: run DEP-8 tests. [python3-debian] - salsa: manipulates salsa.debian.org repositories and users [libgitlab-api-v4-perl] - suspicious-source: output a list of files which are not common source files. [python3-magic] - svnpath: Prints the path to the Subversion repository of a Subversion checkout. Also supports calculating the paths for branches and tags in a repository independent fashion. Used by debcommit to generate svn tags. [subversion] - tagpending: runs from a Debian source tree and tags bugs that are to be closed in the latest changelog as pending. [libsoap-lite-perl] - transition-check: Check a list of source packages for involvement in transitions for which uploads to unstable are currently blocked. [libwww-perl, libyaml-syck-perl] - uscan: Automatically scan for and download upstream updates. Uscan can also call a program such as uupdate to attempt to update the Debianised version based on the new update. Whilst uscan could be used to release the updated version automatically, it is probably better not to without testing it first. Uscan can also verify detached OpenPGP signatures if upstream's signing key is known. [file, gpgv | gpgv2, gnupg | gnupg2, libfile-dirlist-perl, libfile-touch-perl, libfile-which-perl, liblwp-protocol-https-perl, libmoo-perl, libwww-perl, unzip, xz-utils]* - uupdate: Update the package with an archive or patches from an upstream author. This will be of help if you have to update your package. It will try to apply the latest diffs to your package and tell you how successful it was. [patch] - what-patch: determine what patch system, if any, a source package is using. [patchutils] - whodepends: check which maintainers' packages depend on a package. - who-permits-upload: Retrieve information about Debian Maintainer access control lists. [gnupg | gnupg2, libencode-locale-perl, libwww-perl, debian-keyring] - who-uploads: determine the most recent uploaders of a package to the Debian archive. [gnupg | gnupg2, debian-keyring, debian-maintainers, wget] - wnpp-alert: list installed packages which are orphaned or up for adoption. [wget | curl] - wnpp-check: check whether there is an open request for packaging or intention to package bug for a package. [wget | curl] - wrap-and-sort: wrap long lines and sort items in packaging files. [python3-debian] - /usr/share/doc/devscripts/examples: This directory contains examples of procmail and exim scripts for sorting mail arriving to Debian mailing lists.
PackageMaintainer	Devscripts Maintainers <devscripts@packages.debian.org>
PackageName	devscripts
PackageSection	devel
PackageVersion	2.21.3+deb11u1
SHA-1	90DB55613EEAEB6DD21B4A5C76B6BCCA2F8AD0F0
SHA-256	A7325274E7F19A94FE9424D69B893B5BA5E4E4F626E3D9EF4ADD0242E26249EB

Key	Value
FileSize	1093416
MD5	4912B5E00A2AB2322FCF8F4775FA8BB6
PackageDescription	scripts to make the life of a Debian Package maintainer easier Contains the following scripts, dependencies/recommendations shown in brackets afterwards: . - annotate-output: run a command and prepend time and stream (O for stdout, E for stderr) for every line of output. - archpath: Prints arch (tla/Bazaar) package names. Also supports calculating the package names for other branches. [tla | bazaar] - bts: A command-line tool for accessing the Debian Bug Tracking System, both to send mails to control@bts.debian.org and to access the web pages and SOAP interface of the BTS. [www-browser, libauthen-sasl-perl, libnet-smtps-perl, libsoap-lite-perl, liburi-perl, libwww-perl, bsd-mailx | mailx] - build-rdeps: Searches for all packages that build-depend on a given package. [dctrl-tools, dose-extra, libdpkg-perl] - chdist: tool to easily play with several distributions. [dctrl-tools] - checkbashisms: check whether a /bin/sh script contains any common bash-specific constructs. - cowpoke: upload a Debian source package to a cowbuilder host and build it, optionally also signing and uploading the result to an incoming queue. [ssh-client] - cvs-debi, cvs-debc: wrappers around debi and debc respectively (see below) which allow them to be called from the CVS working directory. [cvs-buildpackage] - cvs-debrelease: wrapper around debrelease which allows it to be called from the CVS working directory. [cvs-buildpackage, dupload | dput, ssh-client] - cvs-debuild: A wrapper for cvs-buildpackage to use debuild as its package building program. [cvs-buildpackage, fakeroot, lintian, gnupg |gnupg2] - dcmd: run a given command replacing the name of a .changes or .dsc file with each of the files referenced therein. * - dd-list: given a list of packages, pretty-print it ordered by maintainer. * - debbisect: bisect snapshot.debian.org to find which change in the archive introduced a certain problem. [mmdebstrap, python3-debian] - debc: List contents of current package. Do this after a successful "debuild" to see if the package looks all right. - debchange (abbreviation dch): Modifies debian/changelog and manages version numbers for you. It will either increment the version number or add an entry for the current version, depending upon the options given to it. [libdistro-info-perl, libsoap-lite-perl]* - debcheckout: checkout the development repository of a Debian package. * - debclean: Clean a Debian source tree. Debclean will clean all Debian source trees below the current directory, and if requested, also remove all files that were generated from these source trees (that is .deb, .dsc and .changes files). It will keep the .diffs and original files, though, so that the binaries and other files can be rebuilt if necessary. [fakeroot]* - debcommit: Commits changes to cvs, darcs, svn, svk, tla, bzr, git, or hg, using new entries in debian/changelog as the commit message. Also supports tagging Debian package releases. [cvs | darcs | subversion | svk | tla | bzr | git-core | mercurial, libtimedate-perl] - debdiff: A program which examines two .deb files or two .changes files and reports on any difference found in their file lists. Useful for ensuring that no files were inadvertently lost between versions. Can also examine two .dsc files and report on the changes between source versions. For a deeper comparison one can use the diffoscope package. [wdiff, patchutils]* - debdiff-apply: Apply unified diffs of two Debian source packages, such as those generated by debdiff, to a target Debian source package. Any changes to debian/changelog are dealt with specially, to avoid the conflicts that changelog diffs typically produce when applied naively. May be used to check that old patches still apply to newer versions of those packages. [python3-debian, python3-unidiff, quilt] - debi: Installs the current package by using the setuid root debpkg script described below. It assumes that the current package has just been built (for example by debuild), and the .deb lives in the parent directory, and will effectively run dpkg -i on the .deb. The ability to install the package with a very short command is very useful when troubleshooting packages. - debpkg: A wrapper for dpkg used by debi to allow convenient testing of packages. For debpkg to work, it needs to be made setuid root, and this needs to be performed by the sysadmin -- it is not installed as setuid root by default. (Note that being able to run a setuid root debpkg is effectively the same as having root access to the system, so this should be done with caution.) Having debpkg as a wrapper for dpkg can be a Good Thing (TM), as it decreases the potential for damage by accidental wrong use of commands in superuser mode (e.g., an inadvertent rm -rf * in the wrong directory is disastrous as many can attest to). - debrelease: A wrapper around dupload or dput which figures out which version to upload, and then calls dupload or dput to actually perform the upload. [dupload | dput, ssh-client] - debrebuild: A script that provided a .buildinfo file reports the instructions on how to try to reproduce the reported build. [sbuild | mmdebstrap, libdistro-info-perl] - debrepro: A script that tests reproducibility of Debian packages. It will build a given source directory twice, with a set of variation between the first and second build, and compare the binary packages produced. If diffoscope is installed, it is used to compare non-matching binaries. If disorderfs is installed, it is used during the build to inject non-determinism in filesystem listing operations. [faketime, diffoscope, disorderfs] - debrsign: This transfers a .changes/.dsc pair to a remote machine for signing, and runs debsign on the remote machine over an SSH connection. [gnupg | gnupg2, debian-keyring, ssh-client] - debsign: Use GNU Privacy Guard to sign the changes (and possibly dsc) files created by running dpkg-buildpackage with no-sign options. Useful if you are building a package on a remote machine and wish to sign it on a local one. This script is capable of automatically downloading the .changes and .dsc files from a remote machine. [gnupg |gnupg2, debian-keyring, ssh-client]* - debsnap: grab packages from https://snapshot.debian.org [libwww-perl, libjson-perl] - debuild: A wrapper for building a package (i.e., dpkg-buildpackage) to avoid problems with insufficient permissions and wrong paths etc. Debuild will set up the proper environment for building a package. Debuild will use the fakeroot program to build the package by default, but can be instructed to use any other gain-root command, or can even be installed setuid root. Debuild can also be used to run various of the debian/rules operations with the same root-gaining procedure. Debuild will also run lintian to check that the package does not have any major policy violations. [fakeroot, lintian, gnupg | gnupg2]* - deb-reversion: increases a binary package version number and repacks the package, useful for porters and the like. - deb-why-removed: shows the reason a package was removed from the archive. [libdpkg-perl] - dep3changelog: generate a changelog entry from a DEP3-style patch header. - desktop2menu: given a freedesktop.org desktop file, generate a skeleton for a menu file. [libfile-desktopentry-perl] - dget: Downloads Debian source and binary packages. Point at a .changes or .dsc to download all references files. Specify a package name to download it from the configured apt repository. [wget | curl] - diff2patches: extracts patches from a .diff.gz file placing them under debian/ or, if present, debian/patches. [patchutils] - dpkg-depcheck, dpkg-genbuilddeps: Runs a specified command (such as debian/rules build) or dpkg-buildpackage, respectively, to determine the packages used during the build process. This information can be helpful when trying to determine the packages needed in the Build-Depends etc. lines in the debian/control file. [build-essential, strace] - dscextract: extract a single file from a Debian source package. [patchutils] - dscverify: check the signature and MD5 sums of a dsc file against the most current Debian keyring on your system. [gnupg | gnupg2, debian-keyring] - edit-patch: add/edit a patch for a source package and commit the changes. [quilt | dpatch | cdbs] - getbuildlog: download package build logs from Debian auto-builders. [wget] - git-deborig: try to produce Debian orig.tar using git-archive(1). [libdpkg-perl, libgit-wrapper-perl, liblist-compare-perl, libstring-shellquote-perl, libtry-tiny-perl] - grep-excuses: grep britney's excuses to find out what is happening to your packages. [libdbd-pg-perl, libterm-size-perl, libyaml-syck-perl, wget, w3m] - hardening-check: report the hardening characteristics of a set of binaries. - list-unreleased: searches for packages marked UNRELEASED in their changelog. - ltnu (Long Time No Upload): List all uploads of packages by the given uploader or maintainer and display them ordered by the last upload of that package, oldest uploads first. - manpage-alert: locate binaries without corresponding manpages. [man-db] - mass-bug: mass-file bug reports. [bsd-mailx | mailx] - mergechanges: merge .changes files from the same release but built on different architectures. - mk-build-deps: Given a package name and/or control file, generate a binary package which may be installed to satisfy the build-dependencies of the given package. [equivs] - mk-origtargz: Rename upstream tarball, optionally changing the compression and removing unwanted files. [libfile-which-perl, unzip, xz-utils, file] - namecheck: Check project names are not already taken. - nmudiff: prepare a diff of this version (presumably an NMU against the previously released version (as per the changelog) and submit the diff to the BTS. [patchutils, mutt] - origtargz: fetch the orig tarball of a Debian package from various sources, and unpack it. [pristine-tar] - plotchangelog: display information from a changelog graphically using gnuplot. [libtimedate-perl, gnuplot] - pts-subscribe: subscribe to the PTS (Package Tracking System) for a limited period of time. [bsd-mailx | mailx, at] - rc-alert: list installed packages which have release-critical bugs. [wget | curl] - reproducible-check: reports on the reproducible status of installed packages. For more details please see <https://reproducible-builds.org>. - rmadison: remotely query the Debian archive database about packages. [liburi-perl, wget | curl] - sadt: run DEP-8 tests. [python3-debian] - salsa: manipulates salsa.debian.org repositories and users [libgitlab-api-v4-perl] - suspicious-source: output a list of files which are not common source files. [python3-magic] - svnpath: Prints the path to the Subversion repository of a Subversion checkout. Also supports calculating the paths for branches and tags in a repository independent fashion. Used by debcommit to generate svn tags. [subversion] - tagpending: runs from a Debian source tree and tags bugs that are to be closed in the latest changelog as pending. [libsoap-lite-perl] - transition-check: Check a list of source packages for involvement in transitions for which uploads to unstable are currently blocked. [libwww-perl, libyaml-syck-perl] - uscan: Automatically scan for and download upstream updates. Uscan can also call a program such as uupdate to attempt to update the Debianised version based on the new update. Whilst uscan could be used to release the updated version automatically, it is probably better not to without testing it first. Uscan can also verify detached OpenPGP signatures if upstream's signing key is known. [file, gpgv | gpgv2, gnupg | gnupg2, libfile-dirlist-perl, libfile-touch-perl, libfile-which-perl, liblwp-protocol-https-perl, libmoo-perl, libwww-perl, unzip, xz-utils]* - uupdate: Update the package with an archive or patches from an upstream author. This will be of help if you have to update your package. It will try to apply the latest diffs to your package and tell you how successful it was. [patch] - what-patch: determine what patch system, if any, a source package is using. [patchutils] - whodepends: check which maintainers' packages depend on a package. - who-permits-upload: Retrieve information about Debian Maintainer access control lists. [gnupg | gnupg2, libencode-locale-perl, libwww-perl, debian-keyring] - who-uploads: determine the most recent uploaders of a package to the Debian archive. [gnupg | gnupg2, debian-keyring, debian-maintainers, wget] - wnpp-alert: list installed packages which are orphaned or up for adoption. [wget | curl] - wnpp-check: check whether there is an open request for packaging or intention to package bug for a package. [wget | curl] - wrap-and-sort: wrap long lines and sort items in packaging files. [python3-debian] - /usr/share/doc/devscripts/examples: This directory contains examples of procmail and exim scripts for sorting mail arriving to Debian mailing lists.
PackageMaintainer	Devscripts Maintainers <devscripts@packages.debian.org>
PackageName	devscripts
PackageSection	devel
PackageVersion	2.21.4~bpo11+1
SHA-1	9284B11F8BA9D188A6C3643789F7FFE59E4FB2AB
SHA-256	D8508F07B8ED6FE4F1505A5E26FD3562828A8E4D67BB9F4D3ABF61B32CB38157

Key	Value
FileSize	1092320
MD5	A02911FC662C05ED516558F6F9A09F3C
PackageDescription	scripts to make the life of a Debian Package maintainer easier Contains the following scripts, dependencies/recommendations shown in brackets afterwards: . - annotate-output: run a command and prepend time and stream (O for stdout, E for stderr) for every line of output. - archpath: Prints arch (tla/Bazaar) package names. Also supports calculating the package names for other branches. [tla | bazaar] - bts: A command-line tool for accessing the Debian Bug Tracking System, both to send mails to control@bts.debian.org and to access the web pages and SOAP interface of the BTS. [www-browser, libauthen-sasl-perl, libnet-smtps-perl, libsoap-lite-perl, liburi-perl, libwww-perl, bsd-mailx | mailx] - build-rdeps: Searches for all packages that build-depend on a given package. [dctrl-tools, dose-extra, libdpkg-perl] - chdist: tool to easily play with several distributions. [dctrl-tools] - checkbashisms: check whether a /bin/sh script contains any common bash-specific constructs. - cowpoke: upload a Debian source package to a cowbuilder host and build it, optionally also signing and uploading the result to an incoming queue. [ssh-client] - cvs-debi, cvs-debc: wrappers around debi and debc respectively (see below) which allow them to be called from the CVS working directory. [cvs-buildpackage] - cvs-debrelease: wrapper around debrelease which allows it to be called from the CVS working directory. [cvs-buildpackage, dupload | dput, ssh-client] - cvs-debuild: A wrapper for cvs-buildpackage to use debuild as its package building program. [cvs-buildpackage, fakeroot, lintian, gnupg |gnupg2] - dcmd: run a given command replacing the name of a .changes or .dsc file with each of the files referenced therein. * - dd-list: given a list of packages, pretty-print it ordered by maintainer. * - debbisect: bisect snapshot.debian.org to find which change in the archive introduced a certain problem. [mmdebstrap, python3-debian] - debc: List contents of current package. Do this after a successful "debuild" to see if the package looks all right. - debchange (abbreviation dch): Modifies debian/changelog and manages version numbers for you. It will either increment the version number or add an entry for the current version, depending upon the options given to it. [libdistro-info-perl, libsoap-lite-perl]* - debcheckout: checkout the development repository of a Debian package. * - debclean: Clean a Debian source tree. Debclean will clean all Debian source trees below the current directory, and if requested, also remove all files that were generated from these source trees (that is .deb, .dsc and .changes files). It will keep the .diffs and original files, though, so that the binaries and other files can be rebuilt if necessary. [fakeroot]* - debcommit: Commits changes to cvs, darcs, svn, svk, tla, bzr, git, or hg, using new entries in debian/changelog as the commit message. Also supports tagging Debian package releases. [cvs | darcs | subversion | svk | tla | bzr | git-core | mercurial, libtimedate-perl] - debdiff: A program which examines two .deb files or two .changes files and reports on any difference found in their file lists. Useful for ensuring that no files were inadvertently lost between versions. Can also examine two .dsc files and report on the changes between source versions. For a deeper comparison one can use the diffoscope package. [wdiff, patchutils]* - debdiff-apply: Apply unified diffs of two Debian source packages, such as those generated by debdiff, to a target Debian source package. Any changes to debian/changelog are dealt with specially, to avoid the conflicts that changelog diffs typically produce when applied naively. May be used to check that old patches still apply to newer versions of those packages. [python3-debian, python3-unidiff, quilt] - debi: Installs the current package by using the setuid root debpkg script described below. It assumes that the current package has just been built (for example by debuild), and the .deb lives in the parent directory, and will effectively run dpkg -i on the .deb. The ability to install the package with a very short command is very useful when troubleshooting packages. - debpkg: A wrapper for dpkg used by debi to allow convenient testing of packages. For debpkg to work, it needs to be made setuid root, and this needs to be performed by the sysadmin -- it is not installed as setuid root by default. (Note that being able to run a setuid root debpkg is effectively the same as having root access to the system, so this should be done with caution.) Having debpkg as a wrapper for dpkg can be a Good Thing (TM), as it decreases the potential for damage by accidental wrong use of commands in superuser mode (e.g., an inadvertent rm -rf * in the wrong directory is disastrous as many can attest to). - debrelease: A wrapper around dupload or dput which figures out which version to upload, and then calls dupload or dput to actually perform the upload. [dupload | dput, ssh-client] - debrebuild: A script that provided a .buildinfo file reports the instructions on how to try to reproduce the reported build. [sbuild | mmdebstrap, libdistro-info-perl] - debrepro: A script that tests reproducibility of Debian packages. It will build a given source directory twice, with a set of variation between the first and second build, and compare the binary packages produced. If diffoscope is installed, it is used to compare non-matching binaries. If disorderfs is installed, it is used during the build to inject non-determinism in filesystem listing operations. [faketime, diffoscope, disorderfs] - debrsign: This transfers a .changes/.dsc pair to a remote machine for signing, and runs debsign on the remote machine over an SSH connection. [gnupg | gnupg2, debian-keyring, ssh-client] - debsign: Use GNU Privacy Guard to sign the changes (and possibly dsc) files created by running dpkg-buildpackage with no-sign options. Useful if you are building a package on a remote machine and wish to sign it on a local one. This script is capable of automatically downloading the .changes and .dsc files from a remote machine. [gnupg |gnupg2, debian-keyring, ssh-client]* - debsnap: grab packages from https://snapshot.debian.org [libwww-perl, libjson-perl] - debuild: A wrapper for building a package (i.e., dpkg-buildpackage) to avoid problems with insufficient permissions and wrong paths etc. Debuild will set up the proper environment for building a package. Debuild will use the fakeroot program to build the package by default, but can be instructed to use any other gain-root command, or can even be installed setuid root. Debuild can also be used to run various of the debian/rules operations with the same root-gaining procedure. Debuild will also run lintian to check that the package does not have any major policy violations. [fakeroot, lintian, gnupg | gnupg2]* - deb-reversion: increases a binary package version number and repacks the package, useful for porters and the like. - deb-why-removed: shows the reason a package was removed from the archive. [libdpkg-perl] - dep3changelog: generate a changelog entry from a DEP3-style patch header. - desktop2menu: given a freedesktop.org desktop file, generate a skeleton for a menu file. [libfile-desktopentry-perl] - dget: Downloads Debian source and binary packages. Point at a .changes or .dsc to download all references files. Specify a package name to download it from the configured apt repository. [wget | curl] - diff2patches: extracts patches from a .diff.gz file placing them under debian/ or, if present, debian/patches. [patchutils] - dpkg-depcheck, dpkg-genbuilddeps: Runs a specified command (such as debian/rules build) or dpkg-buildpackage, respectively, to determine the packages used during the build process. This information can be helpful when trying to determine the packages needed in the Build-Depends etc. lines in the debian/control file. [build-essential, strace] - dscextract: extract a single file from a Debian source package. [patchutils] - dscverify: check the signature and MD5 sums of a dsc file against the most current Debian keyring on your system. [gnupg | gnupg2, debian-keyring] - edit-patch: add/edit a patch for a source package and commit the changes. [quilt | dpatch | cdbs] - getbuildlog: download package build logs from Debian auto-builders. [wget] - git-deborig: try to produce Debian orig.tar using git-archive(1). [libdpkg-perl, libgit-wrapper-perl, liblist-compare-perl, libstring-shellquote-perl, libtry-tiny-perl] - grep-excuses: grep britney's excuses to find out what is happening to your packages. [libdbd-pg-perl, libterm-size-perl, libyaml-syck-perl, wget, w3m] - hardening-check: report the hardening characteristics of a set of binaries. - list-unreleased: searches for packages marked UNRELEASED in their changelog. - ltnu (Long Time No Upload): List all uploads of packages by the given uploader or maintainer and display them ordered by the last upload of that package, oldest uploads first. - manpage-alert: locate binaries without corresponding manpages. [man-db] - mass-bug: mass-file bug reports. [bsd-mailx | mailx] - mergechanges: merge .changes files from the same release but built on different architectures. - mk-build-deps: Given a package name and/or control file, generate a binary package which may be installed to satisfy the build-dependencies of the given package. [equivs] - mk-origtargz: Rename upstream tarball, optionally changing the compression and removing unwanted files. [libfile-which-perl, unzip, xz-utils, file] - namecheck: Check project names are not already taken. - nmudiff: prepare a diff of this version (presumably an NMU against the previously released version (as per the changelog) and submit the diff to the BTS. [patchutils, mutt] - origtargz: fetch the orig tarball of a Debian package from various sources, and unpack it. [pristine-tar] - plotchangelog: display information from a changelog graphically using gnuplot. [libtimedate-perl, gnuplot] - pts-subscribe: subscribe to the PTS (Package Tracking System) for a limited period of time. [bsd-mailx | mailx, at] - rc-alert: list installed packages which have release-critical bugs. [wget | curl] - reproducible-check: reports on the reproducible status of installed packages. For more details please see <https://reproducible-builds.org>. - rmadison: remotely query the Debian archive database about packages. [liburi-perl, wget | curl] - sadt: run DEP-8 tests. [python3-debian] - salsa: manipulates salsa.debian.org repositories and users [libgitlab-api-v4-perl] - suspicious-source: output a list of files which are not common source files. [python3-magic] - svnpath: Prints the path to the Subversion repository of a Subversion checkout. Also supports calculating the paths for branches and tags in a repository independent fashion. Used by debcommit to generate svn tags. [subversion] - tagpending: runs from a Debian source tree and tags bugs that are to be closed in the latest changelog as pending. [libsoap-lite-perl] - transition-check: Check a list of source packages for involvement in transitions for which uploads to unstable are currently blocked. [libwww-perl, libyaml-syck-perl] - uscan: Automatically scan for and download upstream updates. Uscan can also call a program such as uupdate to attempt to update the Debianised version based on the new update. Whilst uscan could be used to release the updated version automatically, it is probably better not to without testing it first. Uscan can also verify detached OpenPGP signatures if upstream's signing key is known. [file, gpgv | gpgv2, gnupg | gnupg2, libfile-dirlist-perl, libfile-touch-perl, libfile-which-perl, liblwp-protocol-https-perl, libmoo-perl, libwww-perl, unzip, xz-utils]* - uupdate: Update the package with an archive or patches from an upstream author. This will be of help if you have to update your package. It will try to apply the latest diffs to your package and tell you how successful it was. [patch] - what-patch: determine what patch system, if any, a source package is using. [patchutils] - whodepends: check which maintainers' packages depend on a package. - who-permits-upload: Retrieve information about Debian Maintainer access control lists. [gnupg | gnupg2, libencode-locale-perl, libwww-perl, debian-keyring] - who-uploads: determine the most recent uploaders of a package to the Debian archive. [gnupg | gnupg2, debian-keyring, debian-maintainers, wget] - wnpp-alert: list installed packages which are orphaned or up for adoption. [wget | curl] - wnpp-check: check whether there is an open request for packaging or intention to package bug for a package. [wget | curl] - wrap-and-sort: wrap long lines and sort items in packaging files. [python3-debian] - /usr/share/doc/devscripts/examples: This directory contains examples of procmail and exim scripts for sorting mail arriving to Debian mailing lists.
PackageMaintainer	Devscripts Maintainers <devscripts@packages.debian.org>
PackageName	devscripts
PackageSection	devel
PackageVersion	2.21.3+deb11u1
SHA-1	9EA8497D67B5B5D0B39154D75FC9EF79028AB44F
SHA-256	90ACFC3210B6C94D4543F1505A5EB534456398D319F6BF0FB2399DB66594D8F6