Parents (Total: 124)

The searched file hash is included in 124 parent files which include package known and seen by metalookup. A sample is included below:

Key	Value
FileSize	1093760
MD5	55D3F194AF0ADF8766EE28894FADAAD4
PackageDescription	scripts to make the life of a Debian Package maintainer easier Contains the following scripts, dependencies/recommendations shown in brackets afterwards: . - annotate-output: run a command and prepend time and stream (O for stdout, E for stderr) for every line of output. - archpath: Prints arch (tla/Bazaar) package names. Also supports calculating the package names for other branches. [tla | bazaar] - bts: A command-line tool for accessing the Debian Bug Tracking System, both to send mails to control@bts.debian.org and to access the web pages and SOAP interface of the BTS. [www-browser, libauthen-sasl-perl, libnet-smtps-perl, libsoap-lite-perl, liburi-perl, libwww-perl, bsd-mailx | mailx] - build-rdeps: Searches for all packages that build-depend on a given package. [dctrl-tools, dose-extra, libdpkg-perl] - chdist: tool to easily play with several distributions. [dctrl-tools] - checkbashisms: check whether a /bin/sh script contains any common bash-specific constructs. - cowpoke: upload a Debian source package to a cowbuilder host and build it, optionally also signing and uploading the result to an incoming queue. [ssh-client] - cvs-debi, cvs-debc: wrappers around debi and debc respectively (see below) which allow them to be called from the CVS working directory. [cvs-buildpackage] - cvs-debrelease: wrapper around debrelease which allows it to be called from the CVS working directory. [cvs-buildpackage, dupload | dput, ssh-client] - cvs-debuild: A wrapper for cvs-buildpackage to use debuild as its package building program. [cvs-buildpackage, fakeroot, lintian, gnupg |gnupg2] - dcmd: run a given command replacing the name of a .changes or .dsc file with each of the files referenced therein. * - dd-list: given a list of packages, pretty-print it ordered by maintainer. * - debbisect: bisect snapshot.debian.org to find which change in the archive introduced a certain problem. [mmdebstrap, python3-debian] - debc: List contents of current package. Do this after a successful "debuild" to see if the package looks all right. - debchange (abbreviation dch): Modifies debian/changelog and manages version numbers for you. It will either increment the version number or add an entry for the current version, depending upon the options given to it. [libdistro-info-perl, libsoap-lite-perl]* - debcheckout: checkout the development repository of a Debian package. * - debclean: Clean a Debian source tree. Debclean will clean all Debian source trees below the current directory, and if requested, also remove all files that were generated from these source trees (that is .deb, .dsc and .changes files). It will keep the .diffs and original files, though, so that the binaries and other files can be rebuilt if necessary. [fakeroot]* - debcommit: Commits changes to cvs, darcs, svn, svk, tla, bzr, git, or hg, using new entries in debian/changelog as the commit message. Also supports tagging Debian package releases. [cvs | darcs | subversion | svk | tla | bzr | git-core | mercurial, libtimedate-perl] - debdiff: A program which examines two .deb files or two .changes files and reports on any difference found in their file lists. Useful for ensuring that no files were inadvertently lost between versions. Can also examine two .dsc files and report on the changes between source versions. For a deeper comparison one can use the diffoscope package. [wdiff, patchutils]* - debdiff-apply: Apply unified diffs of two Debian source packages, such as those generated by debdiff, to a target Debian source package. Any changes to debian/changelog are dealt with specially, to avoid the conflicts that changelog diffs typically produce when applied naively. May be used to check that old patches still apply to newer versions of those packages. [python3-debian, python3-unidiff, quilt] - debi: Installs the current package by using the setuid root debpkg script described below. It assumes that the current package has just been built (for example by debuild), and the .deb lives in the parent directory, and will effectively run dpkg -i on the .deb. The ability to install the package with a very short command is very useful when troubleshooting packages. - debpkg: A wrapper for dpkg used by debi to allow convenient testing of packages. For debpkg to work, it needs to be made setuid root, and this needs to be performed by the sysadmin -- it is not installed as setuid root by default. (Note that being able to run a setuid root debpkg is effectively the same as having root access to the system, so this should be done with caution.) Having debpkg as a wrapper for dpkg can be a Good Thing (TM), as it decreases the potential for damage by accidental wrong use of commands in superuser mode (e.g., an inadvertent rm -rf * in the wrong directory is disastrous as many can attest to). - debrelease: A wrapper around dupload or dput which figures out which version to upload, and then calls dupload or dput to actually perform the upload. [dupload | dput, ssh-client] - debrebuild: A script that provided a .buildinfo file reports the instructions on how to try to reproduce the reported build. [sbuild | mmdebstrap, libdistro-info-perl] - debrepro: A script that tests reproducibility of Debian packages. It will build a given source directory twice, with a set of variation between the first and second build, and compare the binary packages produced. If diffoscope is installed, it is used to compare non-matching binaries. If disorderfs is installed, it is used during the build to inject non-determinism in filesystem listing operations. [faketime, diffoscope, disorderfs] - debrsign: This transfers a .changes/.dsc pair to a remote machine for signing, and runs debsign on the remote machine over an SSH connection. [gnupg | gnupg2, debian-keyring, ssh-client] - debsign: Use GNU Privacy Guard to sign the changes (and possibly dsc) files created by running dpkg-buildpackage with no-sign options. Useful if you are building a package on a remote machine and wish to sign it on a local one. This script is capable of automatically downloading the .changes and .dsc files from a remote machine. [gnupg |gnupg2, debian-keyring, ssh-client]* - debsnap: grab packages from https://snapshot.debian.org [libwww-perl, libjson-perl] - debuild: A wrapper for building a package (i.e., dpkg-buildpackage) to avoid problems with insufficient permissions and wrong paths etc. Debuild will set up the proper environment for building a package. Debuild will use the fakeroot program to build the package by default, but can be instructed to use any other gain-root command, or can even be installed setuid root. Debuild can also be used to run various of the debian/rules operations with the same root-gaining procedure. Debuild will also run lintian to check that the package does not have any major policy violations. [fakeroot, lintian, gnupg | gnupg2]* - deb-reversion: increases a binary package version number and repacks the package, useful for porters and the like. - deb-why-removed: shows the reason a package was removed from the archive. [libdpkg-perl] - dep3changelog: generate a changelog entry from a DEP3-style patch header. - desktop2menu: given a freedesktop.org desktop file, generate a skeleton for a menu file. [libfile-desktopentry-perl] - dget: Downloads Debian source and binary packages. Point at a .changes or .dsc to download all references files. Specify a package name to download it from the configured apt repository. [wget | curl] - diff2patches: extracts patches from a .diff.gz file placing them under debian/ or, if present, debian/patches. [patchutils] - dpkg-depcheck, dpkg-genbuilddeps: Runs a specified command (such as debian/rules build) or dpkg-buildpackage, respectively, to determine the packages used during the build process. This information can be helpful when trying to determine the packages needed in the Build-Depends etc. lines in the debian/control file. [build-essential, strace] - dscextract: extract a single file from a Debian source package. [patchutils] - dscverify: check the signature and MD5 sums of a dsc file against the most current Debian keyring on your system. [gnupg | gnupg2, debian-keyring] - edit-patch: add/edit a patch for a source package and commit the changes. [quilt | dpatch | cdbs] - getbuildlog: download package build logs from Debian auto-builders. [wget] - git-deborig: try to produce Debian orig.tar using git-archive(1). [libdpkg-perl, libgit-wrapper-perl, liblist-compare-perl, libstring-shellquote-perl, libtry-tiny-perl] - grep-excuses: grep britney's excuses to find out what is happening to your packages. [libdbd-pg-perl, libterm-size-perl, libyaml-syck-perl, wget, w3m] - hardening-check: report the hardening characteristics of a set of binaries. - list-unreleased: searches for packages marked UNRELEASED in their changelog. - ltnu (Long Time No Upload): List all uploads of packages by the given uploader or maintainer and display them ordered by the last upload of that package, oldest uploads first. - manpage-alert: locate binaries without corresponding manpages. [man-db] - mass-bug: mass-file bug reports. [bsd-mailx | mailx] - mergechanges: merge .changes files from the same release but built on different architectures. - mk-build-deps: Given a package name and/or control file, generate a binary package which may be installed to satisfy the build-dependencies of the given package. [equivs] - mk-origtargz: Rename upstream tarball, optionally changing the compression and removing unwanted files. [libfile-which-perl, unzip, xz-utils, file] - namecheck: Check project names are not already taken. - nmudiff: prepare a diff of this version (presumably an NMU against the previously released version (as per the changelog) and submit the diff to the BTS. [patchutils, mutt] - origtargz: fetch the orig tarball of a Debian package from various sources, and unpack it. [pristine-tar] - plotchangelog: display information from a changelog graphically using gnuplot. [libtimedate-perl, gnuplot] - pts-subscribe: subscribe to the PTS (Package Tracking System) for a limited period of time. [bsd-mailx | mailx, at] - rc-alert: list installed packages which have release-critical bugs. [wget | curl] - reproducible-check: reports on the reproducible status of installed packages. For more details please see <https://reproducible-builds.org>. - rmadison: remotely query the Debian archive database about packages. [liburi-perl, wget | curl] - sadt: run DEP-8 tests. [python3-debian] - salsa: manipulates salsa.debian.org repositories and users [libgitlab-api-v4-perl] - suspicious-source: output a list of files which are not common source files. [python3-magic] - svnpath: Prints the path to the Subversion repository of a Subversion checkout. Also supports calculating the paths for branches and tags in a repository independent fashion. Used by debcommit to generate svn tags. [subversion] - tagpending: runs from a Debian source tree and tags bugs that are to be closed in the latest changelog as pending. [libsoap-lite-perl] - transition-check: Check a list of source packages for involvement in transitions for which uploads to unstable are currently blocked. [libwww-perl, libyaml-syck-perl] - uscan: Automatically scan for and download upstream updates. Uscan can also call a program such as uupdate to attempt to update the Debianised version based on the new update. Whilst uscan could be used to release the updated version automatically, it is probably better not to without testing it first. Uscan can also verify detached OpenPGP signatures if upstream's signing key is known. [file, gpgv | gpgv2, gnupg | gnupg2, libfile-dirlist-perl, libfile-touch-perl, libfile-which-perl, liblwp-protocol-https-perl, libmoo-perl, libwww-perl, unzip, xz-utils]* - uupdate: Update the package with an archive or patches from an upstream author. This will be of help if you have to update your package. It will try to apply the latest diffs to your package and tell you how successful it was. [patch] - what-patch: determine what patch system, if any, a source package is using. [patchutils] - whodepends: check which maintainers' packages depend on a package. - who-permits-upload: Retrieve information about Debian Maintainer access control lists. [gnupg | gnupg2, libencode-locale-perl, libwww-perl, debian-keyring] - who-uploads: determine the most recent uploaders of a package to the Debian archive. [gnupg | gnupg2, debian-keyring, debian-maintainers, wget] - wnpp-alert: list installed packages which are orphaned or up for adoption. [wget | curl] - wnpp-check: check whether there is an open request for packaging or intention to package bug for a package. [wget | curl] - wrap-and-sort: wrap long lines and sort items in packaging files. [python3-debian] - /usr/share/doc/devscripts/examples: This directory contains examples of procmail and exim scripts for sorting mail arriving to Debian mailing lists.
PackageMaintainer	Devscripts Maintainers <devscripts@packages.debian.org>
PackageName	devscripts
PackageSection	devel
PackageVersion	2.21.4~bpo11+1
SHA-1	00023A61B4BA696B57B72572A516103D668FD611
SHA-256	000949FEAF07D9AD2AD98D446B59A4D55F220B702914DACD790B6E1F3C08A758

Key	Value
FileSize	1092396
MD5	4BD1303C15BBF5815E0CE4D4183DDB96
PackageDescription	scripts to make the life of a Debian Package maintainer easier Contains the following scripts, dependencies/recommendations shown in brackets afterwards: . - annotate-output: run a command and prepend time and stream (O for stdout, E for stderr) for every line of output. - archpath: Prints arch (tla/Bazaar) package names. Also supports calculating the package names for other branches. [tla | bazaar] - bts: A command-line tool for accessing the Debian Bug Tracking System, both to send mails to control@bts.debian.org and to access the web pages and SOAP interface of the BTS. [www-browser, libauthen-sasl-perl, libnet-smtps-perl, libsoap-lite-perl, liburi-perl, libwww-perl, bsd-mailx | mailx] - build-rdeps: Searches for all packages that build-depend on a given package. [dctrl-tools, dose-extra, libdpkg-perl] - chdist: tool to easily play with several distributions. [dctrl-tools] - checkbashisms: check whether a /bin/sh script contains any common bash-specific constructs. - cowpoke: upload a Debian source package to a cowbuilder host and build it, optionally also signing and uploading the result to an incoming queue. [ssh-client] - cvs-debi, cvs-debc: wrappers around debi and debc respectively (see below) which allow them to be called from the CVS working directory. [cvs-buildpackage] - cvs-debrelease: wrapper around debrelease which allows it to be called from the CVS working directory. [cvs-buildpackage, dupload | dput, ssh-client] - cvs-debuild: A wrapper for cvs-buildpackage to use debuild as its package building program. [cvs-buildpackage, fakeroot, lintian, gnupg |gnupg2] - dcmd: run a given command replacing the name of a .changes or .dsc file with each of the files referenced therein. * - dd-list: given a list of packages, pretty-print it ordered by maintainer. * - debbisect: bisect snapshot.debian.org to find which change in the archive introduced a certain problem. [mmdebstrap, python3-debian] - debc: List contents of current package. Do this after a successful "debuild" to see if the package looks all right. - debchange (abbreviation dch): Modifies debian/changelog and manages version numbers for you. It will either increment the version number or add an entry for the current version, depending upon the options given to it. [libdistro-info-perl, libsoap-lite-perl]* - debcheckout: checkout the development repository of a Debian package. * - debclean: Clean a Debian source tree. Debclean will clean all Debian source trees below the current directory, and if requested, also remove all files that were generated from these source trees (that is .deb, .dsc and .changes files). It will keep the .diffs and original files, though, so that the binaries and other files can be rebuilt if necessary. [fakeroot]* - debcommit: Commits changes to cvs, darcs, svn, svk, tla, bzr, git, or hg, using new entries in debian/changelog as the commit message. Also supports tagging Debian package releases. [cvs | darcs | subversion | svk | tla | bzr | git-core | mercurial, libtimedate-perl] - debdiff: A program which examines two .deb files or two .changes files and reports on any difference found in their file lists. Useful for ensuring that no files were inadvertently lost between versions. Can also examine two .dsc files and report on the changes between source versions. For a deeper comparison one can use the diffoscope package. [wdiff, patchutils]* - debdiff-apply: Apply unified diffs of two Debian source packages, such as those generated by debdiff, to a target Debian source package. Any changes to debian/changelog are dealt with specially, to avoid the conflicts that changelog diffs typically produce when applied naively. May be used to check that old patches still apply to newer versions of those packages. [python3-debian, python3-unidiff, quilt] - debi: Installs the current package by using the setuid root debpkg script described below. It assumes that the current package has just been built (for example by debuild), and the .deb lives in the parent directory, and will effectively run dpkg -i on the .deb. The ability to install the package with a very short command is very useful when troubleshooting packages. - debpkg: A wrapper for dpkg used by debi to allow convenient testing of packages. For debpkg to work, it needs to be made setuid root, and this needs to be performed by the sysadmin -- it is not installed as setuid root by default. (Note that being able to run a setuid root debpkg is effectively the same as having root access to the system, so this should be done with caution.) Having debpkg as a wrapper for dpkg can be a Good Thing (TM), as it decreases the potential for damage by accidental wrong use of commands in superuser mode (e.g., an inadvertent rm -rf * in the wrong directory is disastrous as many can attest to). - debrelease: A wrapper around dupload or dput which figures out which version to upload, and then calls dupload or dput to actually perform the upload. [dupload | dput, ssh-client] - debrebuild: A script that provided a .buildinfo file reports the instructions on how to try to reproduce the reported build. [sbuild | mmdebstrap, libdistro-info-perl] - debrepro: A script that tests reproducibility of Debian packages. It will build a given source directory twice, with a set of variation between the first and second build, and compare the binary packages produced. If diffoscope is installed, it is used to compare non-matching binaries. If disorderfs is installed, it is used during the build to inject non-determinism in filesystem listing operations. [faketime, diffoscope, disorderfs] - debrsign: This transfers a .changes/.dsc pair to a remote machine for signing, and runs debsign on the remote machine over an SSH connection. [gnupg | gnupg2, debian-keyring, ssh-client] - debsign: Use GNU Privacy Guard to sign the changes (and possibly dsc) files created by running dpkg-buildpackage with no-sign options. Useful if you are building a package on a remote machine and wish to sign it on a local one. This script is capable of automatically downloading the .changes and .dsc files from a remote machine. [gnupg |gnupg2, debian-keyring, ssh-client]* - debsnap: grab packages from https://snapshot.debian.org [libwww-perl, libjson-perl] - debuild: A wrapper for building a package (i.e., dpkg-buildpackage) to avoid problems with insufficient permissions and wrong paths etc. Debuild will set up the proper environment for building a package. Debuild will use the fakeroot program to build the package by default, but can be instructed to use any other gain-root command, or can even be installed setuid root. Debuild can also be used to run various of the debian/rules operations with the same root-gaining procedure. Debuild will also run lintian to check that the package does not have any major policy violations. [fakeroot, lintian, gnupg | gnupg2]* - deb-reversion: increases a binary package version number and repacks the package, useful for porters and the like. - deb-why-removed: shows the reason a package was removed from the archive. [libdpkg-perl] - dep3changelog: generate a changelog entry from a DEP3-style patch header. - desktop2menu: given a freedesktop.org desktop file, generate a skeleton for a menu file. [libfile-desktopentry-perl] - dget: Downloads Debian source and binary packages. Point at a .changes or .dsc to download all references files. Specify a package name to download it from the configured apt repository. [wget | curl] - diff2patches: extracts patches from a .diff.gz file placing them under debian/ or, if present, debian/patches. [patchutils] - dpkg-depcheck, dpkg-genbuilddeps: Runs a specified command (such as debian/rules build) or dpkg-buildpackage, respectively, to determine the packages used during the build process. This information can be helpful when trying to determine the packages needed in the Build-Depends etc. lines in the debian/control file. [build-essential, strace] - dscextract: extract a single file from a Debian source package. [patchutils] - dscverify: check the signature and MD5 sums of a dsc file against the most current Debian keyring on your system. [gnupg | gnupg2, debian-keyring] - edit-patch: add/edit a patch for a source package and commit the changes. [quilt | dpatch | cdbs] - getbuildlog: download package build logs from Debian auto-builders. [wget] - git-deborig: try to produce Debian orig.tar using git-archive(1). [libdpkg-perl, libgit-wrapper-perl, liblist-compare-perl, libstring-shellquote-perl, libtry-tiny-perl] - grep-excuses: grep britney's excuses to find out what is happening to your packages. [libdbd-pg-perl, libterm-size-perl, libyaml-syck-perl, wget, w3m] - hardening-check: report the hardening characteristics of a set of binaries. - list-unreleased: searches for packages marked UNRELEASED in their changelog. - ltnu (Long Time No Upload): List all uploads of packages by the given uploader or maintainer and display them ordered by the last upload of that package, oldest uploads first. - manpage-alert: locate binaries without corresponding manpages. [man-db] - mass-bug: mass-file bug reports. [bsd-mailx | mailx] - mergechanges: merge .changes files from the same release but built on different architectures. - mk-build-deps: Given a package name and/or control file, generate a binary package which may be installed to satisfy the build-dependencies of the given package. [equivs] - mk-origtargz: Rename upstream tarball, optionally changing the compression and removing unwanted files. [libfile-which-perl, unzip, xz-utils, file] - namecheck: Check project names are not already taken. - nmudiff: prepare a diff of this version (presumably an NMU against the previously released version (as per the changelog) and submit the diff to the BTS. [patchutils, mutt] - origtargz: fetch the orig tarball of a Debian package from various sources, and unpack it. [pristine-tar] - plotchangelog: display information from a changelog graphically using gnuplot. [libtimedate-perl, gnuplot] - pts-subscribe: subscribe to the PTS (Package Tracking System) for a limited period of time. [bsd-mailx | mailx, at] - rc-alert: list installed packages which have release-critical bugs. [wget | curl] - reproducible-check: reports on the reproducible status of installed packages. For more details please see <https://reproducible-builds.org>. - rmadison: remotely query the Debian archive database about packages. [liburi-perl, wget | curl] - sadt: run DEP-8 tests. [python3-debian] - salsa: manipulates salsa.debian.org repositories and users [libgitlab-api-v4-perl] - suspicious-source: output a list of files which are not common source files. [python3-magic] - svnpath: Prints the path to the Subversion repository of a Subversion checkout. Also supports calculating the paths for branches and tags in a repository independent fashion. Used by debcommit to generate svn tags. [subversion] - tagpending: runs from a Debian source tree and tags bugs that are to be closed in the latest changelog as pending. [libsoap-lite-perl] - transition-check: Check a list of source packages for involvement in transitions for which uploads to unstable are currently blocked. [libwww-perl, libyaml-syck-perl] - uscan: Automatically scan for and download upstream updates. Uscan can also call a program such as uupdate to attempt to update the Debianised version based on the new update. Whilst uscan could be used to release the updated version automatically, it is probably better not to without testing it first. Uscan can also verify detached OpenPGP signatures if upstream's signing key is known. [file, gpgv | gpgv2, gnupg | gnupg2, libfile-dirlist-perl, libfile-touch-perl, libfile-which-perl, liblwp-protocol-https-perl, libmoo-perl, libwww-perl, unzip, xz-utils]* - uupdate: Update the package with an archive or patches from an upstream author. This will be of help if you have to update your package. It will try to apply the latest diffs to your package and tell you how successful it was. [patch] - what-patch: determine what patch system, if any, a source package is using. [patchutils] - whodepends: check which maintainers' packages depend on a package. - who-permits-upload: Retrieve information about Debian Maintainer access control lists. [gnupg | gnupg2, libencode-locale-perl, libwww-perl, debian-keyring] - who-uploads: determine the most recent uploaders of a package to the Debian archive. [gnupg | gnupg2, debian-keyring, debian-maintainers, wget] - wnpp-alert: list installed packages which are orphaned or up for adoption. [wget | curl] - wnpp-check: check whether there is an open request for packaging or intention to package bug for a package. [wget | curl] - wrap-and-sort: wrap long lines and sort items in packaging files. [python3-debian] - /usr/share/doc/devscripts/examples: This directory contains examples of procmail and exim scripts for sorting mail arriving to Debian mailing lists.
PackageMaintainer	Devscripts Maintainers <devscripts@packages.debian.org>
PackageName	devscripts
PackageSection	devel
PackageVersion	2.21.3~bpo10+1
SHA-1	099B5E91C820C9C2199214F3FC05B4B5E766123C
SHA-256	75BA771DF9DBD5A08067BB110D685B7A25DF00288E842C3E868BE951DBCCA7C6

Key	Value
FileSize	1175040
MD5	608A769E04E6695B17823414183D5669
PackageDescription	scripts to make the life of a Debian Package maintainer easier Contains the following scripts, dependencies/recommendations shown in brackets afterwards: . - annotate-output: run a command and prepend time and stream (O for stdout, E for stderr) for every line of output. - archpath: Prints arch (tla/Bazaar) package names. Also supports calculating the package names for other branches. [tla | bazaar] - bts: A command-line tool for accessing the Debian Bug Tracking System, both to send mails to control@bts.debian.org and to access the web pages and SOAP interface of the BTS. [www-browser, libauthen-sasl-perl, libnet-smtps-perl, libsoap-lite-perl, liburi-perl, libwww-perl, bsd-mailx | mailx] - build-rdeps: Searches for all packages that build-depend on a given package. [dctrl-tools, dose-extra, libdpkg-perl] - chdist: tool to easily play with several distributions. [dctrl-tools] - checkbashisms: check whether a /bin/sh script contains any common bash-specific constructs. - cowpoke: upload a Debian source package to a cowbuilder host and build it, optionally also signing and uploading the result to an incoming queue. [ssh-client] - cvs-debi, cvs-debc: wrappers around debi and debc respectively (see below) which allow them to be called from the CVS working directory. [cvs-buildpackage] - cvs-debrelease: wrapper around debrelease which allows it to be called from the CVS working directory. [cvs-buildpackage, dupload | dput, ssh-client] - cvs-debuild: A wrapper for cvs-buildpackage to use debuild as its package building program. [cvs-buildpackage, fakeroot, lintian, gnupg |gnupg2] - dcmd: run a given command replacing the name of a .changes or .dsc file with each of the files referenced therein. * - dd-list: given a list of packages, pretty-print it ordered by maintainer. * - debbisect: bisect snapshot.debian.org to find which change in the archive introduced a certain problem. [mmdebstrap, python3-debian] - debc: List contents of current package. Do this after a successful "debuild" to see if the package looks all right. - debchange (abbreviation dch): Modifies debian/changelog and manages version numbers for you. It will either increment the version number or add an entry for the current version, depending upon the options given to it. [libdistro-info-perl, libsoap-lite-perl]* - debcheckout: checkout the development repository of a Debian package. * - debclean: Clean a Debian source tree. Debclean will clean all Debian source trees below the current directory, and if requested, also remove all files that were generated from these source trees (that is .deb, .dsc and .changes files). It will keep the .diffs and original files, though, so that the binaries and other files can be rebuilt if necessary. [fakeroot]* - debcommit: Commits changes to cvs, darcs, svn, svk, tla, bzr, git, or hg, using new entries in debian/changelog as the commit message. Also supports tagging Debian package releases. [cvs | darcs | subversion | svk | tla | bzr | git-core | mercurial, libtimedate-perl] - debdiff: A program which examines two .deb files or two .changes files and reports on any difference found in their file lists. Useful for ensuring that no files were inadvertently lost between versions. Can also examine two .dsc files and report on the changes between source versions. For a deeper comparison one can use the diffoscope package. [wdiff, patchutils]* - debdiff-apply: Apply unified diffs of two Debian source packages, such as those generated by debdiff, to a target Debian source package. Any changes to debian/changelog are dealt with specially, to avoid the conflicts that changelog diffs typically produce when applied naively. May be used to check that old patches still apply to newer versions of those packages. [python3-debian, python3-unidiff, quilt] - debi: Installs the current package by using the setuid root debpkg script described below. It assumes that the current package has just been built (for example by debuild), and the .deb lives in the parent directory, and will effectively run dpkg -i on the .deb. The ability to install the package with a very short command is very useful when troubleshooting packages. - debootsnap: Combines debootstrap and snapshot.debian.org to create a chroot containing exactly the requested selection of packages. This can be used to re-create a chroot from the past, for example to reproduce a bug. The tool is also used by debrebuild to build a package in a chroot with build dependencies in the same version as recorded in the buildinfo file. [python3-pycurl, mmdebstrap] - debpkg: A wrapper for dpkg used by debi to allow convenient testing of packages. For debpkg to work, it needs to be made setuid root, and this needs to be performed by the sysadmin -- it is not installed as setuid root by default. (Note that being able to run a setuid root debpkg is effectively the same as having root access to the system, so this should be done with caution.) Having debpkg as a wrapper for dpkg can be a Good Thing (TM), as it decreases the potential for damage by accidental wrong use of commands in superuser mode (e.g., an inadvertent rm -rf * in the wrong directory is disastrous as many can attest to). - debrelease: A wrapper around dupload or dput which figures out which version to upload, and then calls dupload or dput to actually perform the upload. [dupload | dput, ssh-client] - debrebuild: A script that provided a .buildinfo file reports the instructions on how to try to reproduce the reported build. [sbuild | mmdebstrap, python3-pycurl, libdpkg-perl] - debrepro: A script that tests reproducibility of Debian packages. It will build a given source directory twice, with a set of variation between the first and second build, and compare the binary packages produced. If diffoscope is installed, it is used to compare non-matching binaries. If disorderfs is installed, it is used during the build to inject non-determinism in filesystem listing operations. [faketime, diffoscope, disorderfs] - debrsign: This transfers a .changes/.dsc pair to a remote machine for signing, and runs debsign on the remote machine over an SSH connection. [gnupg | gnupg2, debian-keyring, ssh-client] - debsign: Use GNU Privacy Guard to sign the changes (and possibly dsc) files created by running dpkg-buildpackage with no-sign options. Useful if you are building a package on a remote machine and wish to sign it on a local one. This script is capable of automatically downloading the .changes and .dsc files from a remote machine. [gnupg |gnupg2, debian-keyring, ssh-client]* - debsnap: grab packages from https://snapshot.debian.org [libwww-perl, libjson-perl] - debuild: A wrapper for building a package (i.e., dpkg-buildpackage) to avoid problems with insufficient permissions and wrong paths etc. Debuild will set up the proper environment for building a package. Debuild will use the fakeroot program to build the package by default, but can be instructed to use any other gain-root command, or can even be installed setuid root. Debuild can also be used to run various of the debian/rules operations with the same root-gaining procedure. Debuild will also run lintian to check that the package does not have any major policy violations. [fakeroot, lintian, gnupg | gnupg2]* - deb-janitor: command-line client for interacting with the Debian Janitor. - deb-reversion: increases a binary package version number and repacks the package, useful for porters and the like. - deb-why-removed: shows the reason a package was removed from the archive. [libdpkg-perl] - dep3changelog: generate a changelog entry from a DEP3-style patch header. - desktop2menu: given a freedesktop.org desktop file, generate a skeleton for a menu file. [libfile-desktopentry-perl] - dget: Downloads Debian source and binary packages. Point at a .changes or .dsc to download all references files. Specify a package name to download it from the configured apt repository. [wget | curl] - diff2patches: extracts patches from a .diff.gz file placing them under debian/ or, if present, debian/patches. [patchutils] - dpkg-depcheck, dpkg-genbuilddeps: Runs a specified command (such as debian/rules build) or dpkg-buildpackage, respectively, to determine the packages used during the build process. This information can be helpful when trying to determine the packages needed in the Build-Depends etc. lines in the debian/control file. [build-essential, strace] - dscextract: extract a single file from a Debian source package. [patchutils] - dscverify: check the signature and MD5 sums of a dsc file against the most current Debian keyring on your system. [gnupg | gnupg2, debian-keyring] - edit-patch: add/edit a patch for a source package and commit the changes. [quilt | dpatch | cdbs] - getbuildlog: download package build logs from Debian auto-builders. [wget] - git-deborig: try to produce Debian orig.tar using git-archive(1). [libdpkg-perl, libgit-wrapper-perl, liblist-compare-perl, libstring-shellquote-perl, libtry-tiny-perl] - grep-excuses: grep britney's excuses to find out what is happening to your packages. [libdbd-pg-perl, libterm-size-perl, libyaml-syck-perl, wget, w3m] - hardening-check: report the hardening characteristics of a set of binaries. - list-unreleased: searches for packages marked UNRELEASED in their changelog. - ltnu (Long Time No Upload): List all uploads of packages by the given uploader or maintainer and display them ordered by the last upload of that package, oldest uploads first. - manpage-alert: locate binaries without corresponding manpages. [man-db] - mass-bug: mass-file bug reports. [bsd-mailx | mailx] - mergechanges: merge .changes files from the same release but built on different architectures. - mk-build-deps: Given a package name and/or control file, generate a binary package which may be installed to satisfy the build-dependencies of the given package. [equivs] - mk-origtargz: Rename upstream tarball, optionally changing the compression and removing unwanted files. [libfile-which-perl, unzip, xz-utils, file] - namecheck: Check project names are not already taken. - nmudiff: prepare a diff of this version (presumably an NMU against the previously released version (as per the changelog) and submit the diff to the BTS. [patchutils, mutt] - origtargz: fetch the orig tarball of a Debian package from various sources, and unpack it. [pristine-tar, pristine-lfs] - plotchangelog: display information from a changelog graphically using gnuplot. [libtimedate-perl, gnuplot] - pts-subscribe: subscribe to the PTS (Package Tracking System) for a limited period of time. [bsd-mailx | mailx, at] - rc-alert: list installed packages which have release-critical bugs. [wget | curl] - reproducible-check: reports on the reproducible status of installed packages. For more details please see <https://reproducible-builds.org>. - rmadison: remotely query the Debian archive database about packages. [liburi-perl, wget | curl] - sadt: run DEP-8 tests. [python3-debian] - salsa: manipulates salsa.debian.org repositories and users [libgitlab-api-v4-perl] - suspicious-source: output a list of files which are not common source files. [python3-magic] - svnpath: Prints the path to the Subversion repository of a Subversion checkout. Also supports calculating the paths for branches and tags in a repository independent fashion. Used by debcommit to generate svn tags. [subversion] - tagpending: runs from a Debian source tree and tags bugs that are to be closed in the latest changelog as pending. [libsoap-lite-perl] - transition-check: Check a list of source packages for involvement in transitions for which uploads to unstable are currently blocked. [libwww-perl, libyaml-syck-perl] - uscan: Automatically scan for and download upstream updates. Uscan can also call a program such as uupdate to attempt to update the Debianised version based on the new update. Whilst uscan could be used to release the updated version automatically, it is probably better not to without testing it first. Uscan can also verify detached OpenPGP signatures if upstream's signing key is known. [file, gpgv | gpgv2, gnupg | gnupg2, libfile-dirlist-perl, libfile-touch-perl, libfile-which-perl, liblwp-protocol-https-perl, libmoo-perl, libwww-perl, unzip, xz-utils]* - uupdate: Update the package with an archive or patches from an upstream author. This will be of help if you have to update your package. It will try to apply the latest diffs to your package and tell you how successful it was. [patch] - what-patch: determine what patch system, if any, a source package is using. [patchutils] - whodepends: check which maintainers' packages depend on a package. - who-permits-upload: Retrieve information about Debian Maintainer access control lists. [gnupg | gnupg2, libencode-locale-perl, libwww-perl, debian-keyring] - who-uploads: determine the most recent uploaders of a package to the Debian archive. [gnupg | gnupg2, debian-keyring, debian-maintainers, wget] - wnpp-alert: list installed packages which are orphaned or up for adoption. [wget | curl] - wnpp-check: check whether there is an open request for packaging or intention to package bug for a package. [wget | curl] - wrap-and-sort: wrap long lines and sort items in packaging files. [python3-debian] - /usr/share/doc/devscripts/examples: This directory contains examples of procmail and exim scripts for sorting mail arriving to Debian mailing lists.
PackageMaintainer	Devscripts Maintainers <devscripts@packages.debian.org>
PackageName	devscripts
PackageSection	devel
PackageVersion	2.22.1+b1
SHA-1	0DB66344386C327D7E000A870B4D0D4C95C5732F
SHA-256	1AA8616C5D0754BF5E45DDCB205A9C89E4A4D60007B8A6ADD1620F855A2043F8

Key	Value
FileSize	939972
MD5	684F8DFD77951897EDC3863F231BF504
PackageDescription	scripts to make the life of a Debian Package maintainer easier Contains the following scripts, dependencies/recommendations shown in brackets afterwards: . - annotate-output: run a command and prepend time and stream (O for stdout, E for stderr) for every line of output. - archpath: Prints arch (tla/Bazaar) package names. Also supports calculating the package names for other branches. [tla | bazaar] - bts: A command-line tool for accessing the Debian Bug Tracking System, both to send mails to control@bts.debian.org and to access the web pages and SOAP interface of the BTS. [www-browser, libauthen-sasl-perl, libnet-smtps-perl, libsoap-lite-perl, liburi-perl, libwww-perl, bsd-mailx | mailx] - build-rdeps: Searches for all packages that build-depend on a given package. [dctrl-tools, dose-extra, libdpkg-perl] - chdist: tool to easily play with several distributions. [dctrl-tools] - checkbashisms: check whether a /bin/sh script contains any common bash-specific constructs. - cowpoke: upload a Debian source package to a cowbuilder host and build it, optionally also signing and uploading the result to an incoming queue. [ssh-client] - cvs-debi, cvs-debc: wrappers around debi and debc respectively (see below) which allow them to be called from the CVS working directory. [cvs-buildpackage] - cvs-debrelease: wrapper around debrelease which allows it to be called from the CVS working directory. [cvs-buildpackage, dupload | dput, ssh-client] - cvs-debuild: A wrapper for cvs-buildpackage to use debuild as its package building program. [cvs-buildpackage, fakeroot, lintian, gnupg |gnupg2] - dcmd: run a given command replacing the name of a .changes or .dsc file with each of the files referenced therein. * - dd-list: given a list of packages, pretty-print it ordered by maintainer. * - debc: List contents of current package. Do this after a successful "debuild" to see if the package looks all right. - debchange (abbreviation dch): Modifies debian/changelog and manages version numbers for you. It will either increment the version number or add an entry for the current version, depending upon the options given to it. [libdistro-info-perl, libsoap-lite-perl]* - debcheckout: checkout the development repository of a Debian package. * - debclean: Clean a Debian source tree. Debclean will clean all Debian source trees below the current directory, and if requested, also remove all files that were generated from these source trees (that is .deb, .dsc and .changes files). It will keep the .diffs and original files, though, so that the binaries and other files can be rebuilt if necessary. [fakeroot]* - debcommit: Commits changes to cvs, darcs, svn, svk, tla, bzr, git, or hg, using new entries in debian/changelog as the commit message. Also supports tagging Debian package releases. [cvs | darcs | subversion | svk | tla | bzr | git-core | mercurial, libtimedate-perl] - debdiff: A program which examines two .deb files or two .changes files and reports on any difference found in their file lists. Useful for ensuring that no files were inadvertently lost between versions. Can also examine two .dsc files and report on the changes between source versions. For a deeper comparison one can use the diffoscope package. [wdiff, patchutils]* - debdiff-apply: Apply unified diffs of two Debian source packages, such as those generated by debdiff, to a target Debian source package. Any changes to debian/changelog are dealt with specially, to avoid the conflicts that changelog diffs typically produce when applied naively. May be used to check that old patches still apply to newer versions of those packages. [python3-debian, python3-unidiff, quilt] - debi: Installs the current package by using the setuid root debpkg script described below. It assumes that the current package has just been built (for example by debuild), and the .deb lives in the parent directory, and will effectively run dpkg -i on the .deb. The ability to install the package with a very short command is very useful when troubleshooting packages. - debpkg: A wrapper for dpkg used by debi to allow convenient testing of packages. For debpkg to work, it needs to be made setuid root, and this needs to be performed by the sysadmin -- it is not installed as setuid root by default. (Note that being able to run a setuid root debpkg is effectively the same as having root access to the system, so this should be done with caution.) Having debpkg as a wrapper for dpkg can be a Good Thing (TM), as it decreases the potential for damage by accidental wrong use of commands in superuser mode (e.g., an inadvertent rm -rf * in the wrong directory is disastrous as many can attest to). - debrelease: A wrapper around dupload or dput which figures out which version to upload, and then calls dupload or dput to actually perform the upload. [dupload | dput, ssh-client] - debrepro: A script that tests reproducibility of Debian packages. It will build a given source directory twice, with a set of variation between the first and second build, and compare the binary packages produced. If diffoscope is installed, it is used to compare non-matching binaries. If disorderfs is installed, it is used during the build to inject non-determinism in filesystem listing operations. [faketime, diffoscope, disorderfs] - debrsign: This transfers a .changes/.dsc pair to a remote machine for signing, and runs debsign on the remote machine over an SSH connection. [gnupg | gnupg2, debian-keyring, ssh-client] - debsign: Use GNU Privacy Guard to sign the changes (and possibly dsc) files created by running dpkg-buildpackage with no-sign options. Useful if you are building a package on a remote machine and wish to sign it on a local one. This script is capable of automatically downloading the .changes and .dsc files from a remote machine. [gnupg |gnupg2, debian-keyring, ssh-client]* - debsnap: grab packages from https://snapshot.debian.org [libwww-perl, libjson-perl] - debuild: A wrapper for building a package (i.e., dpkg-buildpackage) to avoid problems with insufficient permissions and wrong paths etc. Debuild will set up the proper environment for building a package. Debuild will use the fakeroot program to build the package by default, but can be instructed to use any other gain-root command, or can even be installed setuid root. Debuild can also be used to run various of the debian/rules operations with the same root-gaining procedure. Debuild will also run lintian to check that the package does not have any major policy violations. [fakeroot, lintian, gnupg | gnupg2]* - deb-reversion: increases a binary package version number and repacks the package, useful for porters and the like. - deb-why-removed: shows the reason a package was removed from the archive. [libdpkg-perl] - dep3changelog: generate a changelog entry from a DEP3-style patch header. - desktop2menu: given a freedesktop.org desktop file, generate a skeleton for a menu file. [libfile-desktopentry-perl] - dget: Downloads Debian source and binary packages. Point at a .changes or .dsc to download all references files. Specify a package name to download it from the configured apt repository. [wget | curl] - diff2patches: extracts patches from a .diff.gz file placing them under debian/ or, if present, debian/patches. [patchutils] - dpkg-depcheck, dpkg-genbuilddeps: Runs a specified command (such as debian/rules build) or dpkg-buildpackage, respectively, to determine the packages used during the build process. This information can be helpful when trying to determine the packages needed in the Build-Depends etc. lines in the debian/control file. [build-essential, strace] - dscextract: extract a single file from a Debian source package. [patchutils] - dscverify: check the signature and MD5 sums of a dsc file against the most current Debian keyring on your system. [gnupg | gnupg2, debian-keyring] - edit-patch: add/edit a patch for a source package and commit the changes. [quilt | dpatch | cdbs] - getbuildlog: download package build logs from Debian auto-builders. [wget] - git-deborig: try to produce Debian orig.tar using git-archive(1). [libdpkg-perl, libgit-wrapper-perl, liblist-compare-perl, libstring-shellquote-perl, libtry-tiny-perl] - grep-excuses: grep britney's excuses to find out what is happening to your packages. [libdbd-pg-perl, libterm-size-perl, libyaml-syck-perl, wget, w3m] - hardening-check: report the hardening characteristics of a set of binaries. - list-unreleased: searches for packages marked UNRELEASED in their changelog. - ltnu (Long Time No Upload): List all uploads of packages by the given uploader or maintainer and display them ordered by the last upload of that package, oldest uploads first. - manpage-alert: locate binaries without corresponding manpages. [man-db] - mass-bug: mass-file bug reports. [bsd-mailx | mailx] - mergechanges: merge .changes files from the same release but built on different architectures. - mk-build-deps: Given a package name and/or control file, generate a binary package which may be installed to satisfy the build-dependencies of the given package. [equivs] - mk-origtargz: Rename upstream tarball, optionally changing the compression and removing unwanted files. [libfile-which-perl, unzip, xz-utils, file] - namecheck: Check project names are not already taken. - nmudiff: prepare a diff of this version (presumably an NMU against the previously released version (as per the changelog) and submit the diff to the BTS. [patchutils, mutt] - origtargz: fetch the orig tarball of a Debian package from various sources, and unpack it. - plotchangelog: display information from a changelog graphically using gnuplot. [libtimedate-perl, gnuplot] - pts-subscribe: subscribe to the PTS (Package Tracking System) for a limited period of time. [bsd-mailx | mailx, at] - rc-alert: list installed packages which have release-critical bugs. [wget | curl] - rmadison: remotely query the Debian archive database about packages. [liburi-perl, wget | curl] - sadt: run DEP-8 tests. [python3-debian] - salsa: manipulates salsa.debian.org repositories and users [libgitlab-api-v4-perl] - suspicious-source: output a list of files which are not common source files. [python3-magic] - svnpath: Prints the path to the Subversion repository of a Subversion checkout. Also supports calculating the paths for branches and tags in a repository independent fashion. Used by debcommit to generate svn tags. [subversion] - tagpending: runs from a Debian source tree and tags bugs that are to be closed in the latest changelog as pending. [libsoap-lite-perl] - transition-check: Check a list of source packages for involvement in transitions for which uploads to unstable are currently blocked. [libwww-perl, libyaml-syck-perl] - uscan: Automatically scan for and download upstream updates. Uscan can also call a program such as uupdate to attempt to update the Debianised version based on the new update. Whilst uscan could be used to release the updated version automatically, it is probably better not to without testing it first. Uscan can also verify detached OpenPGP signatures if upstream's signing key is known. [file, gpgv | gpgv2, gnupg | gnupg2, libfile-which-perl, liblwp-protocol-https-perl, libmoo-perl, libwww-perl, unzip, xz-utils]* - uupdate: Update the package with an archive or patches from an upstream author. This will be of help if you have to update your package. It will try to apply the latest diffs to your package and tell you how successful it was. [patch] - what-patch: determine what patch system, if any, a source package is using. [patchutils] - whodepends: check which maintainers' packages depend on a package. - who-permits-upload: Retrieve information about Debian Maintainer access control lists. [gnupg | gnupg2, libencode-locale-perl, libwww-perl, debian-keyring] - who-uploads: determine the most recent uploaders of a package to the Debian archive. [gnupg | gnupg2, debian-keyring, debian-maintainers, wget] - wnpp-alert: list installed packages which are orphaned or up for adoption. [wget | curl] - wnpp-check: check whether there is an open request for packaging or intention to package bug for a package. [wget | curl] - wrap-and-sort: wrap long lines and sort items in packaging files. [python3-debian] - /usr/share/doc/devscripts/examples: This directory contains examples of procmail and exim scripts for sorting mail arriving to Debian mailing lists.
PackageMaintainer	Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
PackageName	devscripts
PackageSection	devel
PackageVersion	2.20.2ubuntu2
SHA-1	0E150ED6991D5BFCB19C9DBFFCCC67D97376F177
SHA-256	7DCF8ECC83AC3EE102B82C488EBE82D1F07D9910685B1A7A232EC8BD9597A91A

Key	Value
FileSize	1045532
MD5	3736200E3453702C777CF262D5EE09FE
PackageDescription	scripts to make the life of a Debian Package maintainer easier Contains the following scripts, dependencies/recommendations shown in brackets afterwards: . - annotate-output: run a command and prepend time and stream (O for stdout, E for stderr) for every line of output. - archpath: Prints arch (tla/Bazaar) package names. Also supports calculating the package names for other branches. [tla | bazaar] - bts: A command-line tool for accessing the Debian Bug Tracking System, both to send mails to control@bts.debian.org and to access the web pages and SOAP interface of the BTS. [www-browser, libauthen-sasl-perl, libnet-smtps-perl, libsoap-lite-perl, liburi-perl, libwww-perl, bsd-mailx | mailx] - build-rdeps: Searches for all packages that build-depend on a given package. [dctrl-tools, dose-extra, libdpkg-perl] - chdist: tool to easily play with several distributions. [dctrl-tools] - checkbashisms: check whether a /bin/sh script contains any common bash-specific constructs. - cowpoke: upload a Debian source package to a cowbuilder host and build it, optionally also signing and uploading the result to an incoming queue. [ssh-client] - cvs-debi, cvs-debc: wrappers around debi and debc respectively (see below) which allow them to be called from the CVS working directory. [cvs-buildpackage] - cvs-debrelease: wrapper around debrelease which allows it to be called from the CVS working directory. [cvs-buildpackage, dupload | dput, ssh-client] - cvs-debuild: A wrapper for cvs-buildpackage to use debuild as its package building program. [cvs-buildpackage, fakeroot, lintian, gnupg |gnupg2] - dcmd: run a given command replacing the name of a .changes or .dsc file with each of the files referenced therein. * - dcontrol: remotely query package and source control files for all Debian distributions. [liburl-perl, libwww-perl] - dd-list: given a list of packages, pretty-print it ordered by maintainer. * - debc: List contents of current package. Do this after a successful "debuild" to see if the package looks all right. - debchange (abbreviation dch): Modifies debian/changelog and manages version numbers for you. It will either increment the version number or add an entry for the current version, depending upon the options given to it. [libdistro-info-perl, libsoap-lite-perl]* - debcheckout: checkout the development repository of a Debian package. * - debclean: Clean a Debian source tree. Debclean will clean all Debian source trees below the current directory, and if requested, also remove all files that were generated from these source trees (that is .deb, .dsc and .changes files). It will keep the .diffs and original files, though, so that the binaries and other files can be rebuilt if necessary. [fakeroot]* - debcommit: Commits changes to cvs, darcs, svn, svk, tla, bzr, git, or hg, using new entries in debian/changelog as the commit message. Also supports tagging Debian package releases. [cvs | darcs | subversion | svk | tla | bzr | git-core | mercurial, libtimedate-perl] - debdiff: A program which examines two .deb files or two .changes files and reports on any difference found in their file lists. Useful for ensuring that no files were inadvertently lost between versions. Can also examine two .dsc files and report on the changes between source versions. For a deeper comparison one can use the diffoscope package. [wdiff, patchutils]* - debdiff-apply: Apply unified diffs of two Debian source packages, such as those generated by debdiff, to a target Debian source package. Any changes to debian/changelog are dealt with specially, to avoid the conflicts that changelog diffs typically produce when applied naively. May be used to check that old patches still apply to newer versions of those packages. [python3-debian, python3-unidiff, quilt] - debi: Installs the current package by using the setuid root debpkg script described below. It assumes that the current package has just been built (for example by debuild), and the .deb lives in the parent directory, and will effectively run dpkg -i on the .deb. The ability to install the package with a very short command is very useful when troubleshooting packages. - debpkg: A wrapper for dpkg used by debi to allow convenient testing of packages. For debpkg to work, it needs to be made setuid root, and this needs to be performed by the sysadmin -- it is not installed as setuid root by default. (Note that being able to run a setuid root debpkg is effectively the same as having root access to the system, so this should be done with caution.) Having debpkg as a wrapper for dpkg can be a Good Thing (TM), as it decreases the potential for damage by accidental wrong use of commands in superuser mode (e.g., an inadvertent rm -rf * in the wrong directory is disastrous as many can attest to). - debrelease: A wrapper around dupload or dput which figures out which version to upload, and then calls dupload or dput to actually perform the upload. [dupload | dput, ssh-client] - debrepro: A script that tests reproducibility of Debian packages. It will build a given source directory twice, with a set of variation between the first and second build, and compare the binary packages produced. If diffoscope is installed, it is used to compare non-matching binaries. If disorderfs is installed, it is used during the build to inject non-determinism in filesystem listing operations. [faketime, diffoscope, disorderfs] - debrsign: This transfers a .changes/.dsc pair to a remote machine for signing, and runs debsign on the remote machine over an SSH connection. [gnupg | gnupg2, debian-keyring, ssh-client] - debsign: Use GNU Privacy Guard to sign the changes (and possibly dsc) files created by running dpkg-buildpackage with no-sign options. Useful if you are building a package on a remote machine and wish to sign it on a local one. This script is capable of automatically downloading the .changes and .dsc files from a remote machine. [gnupg |gnupg2, debian-keyring, ssh-client]* - debsnap: grab packages from https://snapshot.debian.org [libwww-perl, libjson-perl] - debuild: A wrapper for building a package (i.e., dpkg-buildpackage) to avoid problems with insufficient permissions and wrong paths etc. Debuild will set up the proper environment for building a package. Debuild will use the fakeroot program to build the package by default, but can be instructed to use any other gain-root command, or can even be installed setuid root. Debuild can also be used to run various of the debian/rules operations with the same root-gaining procedure. Debuild will also run lintian to check that the package does not have any major policy violations. [fakeroot, lintian, gnupg | gnupg2]* - deb-reversion: increases a binary package version number and repacks the package, useful for porters and the like. - dep3changelog: generate a changelog entry from a DEP3-style patch header. - desktop2menu: given a freedesktop.org desktop file, generate a skeleton for a menu file. [libfile-desktopentry-perl] - dget: Downloads Debian source and binary packages. Point at a .changes or .dsc to download all references files. Specify a package name to download it from the configured apt repository. [wget | curl] - diff2patches: extracts patches from a .diff.gz file placing them under debian/ or, if present, debian/patches. [patchutils] - dpkg-depcheck, dpkg-genbuilddeps: Runs a specified command (such as debian/rules build) or dpkg-buildpackage, respectively, to determine the packages used during the build process. This information can be helpful when trying to determine the packages needed in the Build-Depends etc. lines in the debian/control file. [build-essential, strace] - dscextract: extract a single file from a Debian source package. [patchutils] - dscverify: check the signature and MD5 sums of a dsc file against the most current Debian keyring on your system. [gnupg | gnupg2, debian-keyring] - edit-patch: add/edit a patch for a source package and commit the changes. [quilt | dpatch | cdbs] - getbuildlog: download package build logs from Debian auto-builders. [wget] - git-deborig: try to produce Debian orig.tar using git-archive(1). [libdpkg-perl, libgit-wrapper-perl, liblist-compare-perl, libstring-shellquote-perl, libtry-tiny-perl] - grep-excuses: grep britney's excuses to find out what is happening to your packages. [libdbd-pg-perl, libterm-size-perl, libyaml-syck-perl, wget, w3m] - hardening-check: report the hardening characteristics of a set of binaries. - list-unreleased: searches for packages marked UNRELEASED in their changelog. - ltnu (Long Time No Upload): List all uploads of packages by the given uploader or maintainer and display them ordered by the last upload of that package, oldest uploads first. - manpage-alert: locate binaries without corresponding manpages. [man-db] - mass-bug: mass-file bug reports. [bsd-mailx | mailx] - mergechanges: merge .changes files from the same release but built on different architectures. - mk-build-deps: Given a package name and/or control file, generate a binary package which may be installed to satisfy the build-dependencies of the given package. [equivs] - mk-origtargz: Rename upstream tarball, optionally changing the compression and removing unwanted files. [libfile-which-perl, unzip, xz-utils, file] - namecheck: Check project names are not already taken. - nmudiff: prepare a diff of this version (presumably an NMU against the previously released version (as per the changelog) and submit the diff to the BTS. [patchutils, mutt] - origtargz: fetch the orig tarball of a Debian package from various sources, and unpack it. - plotchangelog: display information from a changelog graphically using gnuplot. [libtimedate-perl, gnuplot] - pts-subscribe: subscribe to the PTS (Package Tracking System) for a limited period of time. [bsd-mailx | mailx, at] - rc-alert: list installed packages which have release-critical bugs. [wget | curl] - rmadison: remotely query the Debian archive database about packages. [liburi-perl, wget | curl] - sadt: run DEP-8 tests. [python3-debian] - salsa: manipulates salsa.debian.org repositories and users [libgitlab-api-v4-perl] - suspicious-source: output a list of files which are not common source files. [python3-magic] - svnpath: Prints the path to the Subversion repository of a Subversion checkout. Also supports calculating the paths for branches and tags in a repository independent fashion. Used by debcommit to generate svn tags. [subversion] - tagpending: runs from a Debian source tree and tags bugs that are to be closed in the latest changelog as pending. [libsoap-lite-perl] - transition-check: Check a list of source packages for involvement in transitions for which uploads to unstable are currently blocked. [libwww-perl, libyaml-syck-perl] - uscan: Automatically scan for and download upstream updates. Uscan can also call a program such as uupdate to attempt to update the Debianised version based on the new update. Whilst uscan could be used to release the updated version automatically, it is probably better not to without testing it first. Uscan can also verify detached OpenPGP signatures if upstream's signing key is known. [file, gpgv | gpgv2, gnupg | gnupg2, libfile-which-perl, liblwp-protocol-https-perl, libmoo-perl, libwww-perl, unzip, xz-utils]* - uupdate: Update the package with an archive or patches from an upstream author. This will be of help if you have to update your package. It will try to apply the latest diffs to your package and tell you how successful it was. [patch] - what-patch: determine what patch system, if any, a source package is using. [patchutils] - whodepends: check which maintainers' packages depend on a package. - who-permits-upload: Retrieve information about Debian Maintainer access control lists. [gnupg | gnupg2, libencode-locale-perl, libwww-perl, debian-keyring] - who-uploads: determine the most recent uploaders of a package to the Debian archive. [gnupg | gnupg2, debian-keyring, debian-maintainers, wget] - wnpp-alert: list installed packages which are orphaned or up for adoption. [wget | curl] - wnpp-check: check whether there is an open request for packaging or intention to package bug for a package. [wget | curl] - wrap-and-sort: wrap long lines and sort items in packaging files. [python3-debian] - /usr/share/doc/devscripts/examples: This directory contains examples of procmail and exim scripts for sorting mail arriving to Debian mailing lists.
PackageMaintainer	Devscripts Maintainers <devscripts@packages.debian.org>
PackageName	devscripts
PackageSection	devel
PackageVersion	2.19.5+deb10u1
SHA-1	0F73E58BA4E459C6A954ED6263F2E949EC0357C3
SHA-256	26EFAB098E17AA83C14AE8BF8E7DD4253B1A872AA2311D19706113E555450E0D

Key	Value
FileSize	1102288
MD5	F77CA45A15EB8AD847AC289E865035B9
PackageDescription	scripts to make the life of a Debian Package maintainer easier Contains the following scripts, dependencies/recommendations shown in brackets afterwards: . - annotate-output: run a command and prepend time and stream (O for stdout, E for stderr) for every line of output. - archpath: Prints arch (tla/Bazaar) package names. Also supports calculating the package names for other branches. [tla | bazaar] - bts: A command-line tool for accessing the Debian Bug Tracking System, both to send mails to control@bts.debian.org and to access the web pages and SOAP interface of the BTS. [www-browser, libauthen-sasl-perl, libnet-smtps-perl, libsoap-lite-perl, liburi-perl, libwww-perl, bsd-mailx | mailx] - build-rdeps: Searches for all packages that build-depend on a given package. [dctrl-tools, dose-extra, libdpkg-perl] - chdist: tool to easily play with several distributions. [dctrl-tools] - checkbashisms: check whether a /bin/sh script contains any common bash-specific constructs. - cowpoke: upload a Debian source package to a cowbuilder host and build it, optionally also signing and uploading the result to an incoming queue. [ssh-client] - cvs-debi, cvs-debc: wrappers around debi and debc respectively (see below) which allow them to be called from the CVS working directory. [cvs-buildpackage] - cvs-debrelease: wrapper around debrelease which allows it to be called from the CVS working directory. [cvs-buildpackage, dupload | dput, ssh-client] - cvs-debuild: A wrapper for cvs-buildpackage to use debuild as its package building program. [cvs-buildpackage, fakeroot, lintian, gnupg |gnupg2] - dcmd: run a given command replacing the name of a .changes or .dsc file with each of the files referenced therein. * - dd-list: given a list of packages, pretty-print it ordered by maintainer. * - debbisect: bisect snapshot.debian.org to find which change in the archive introduced a certain problem. [mmdebstrap, python3-debian] - debc: List contents of current package. Do this after a successful "debuild" to see if the package looks all right. - debchange (abbreviation dch): Modifies debian/changelog and manages version numbers for you. It will either increment the version number or add an entry for the current version, depending upon the options given to it. [libdistro-info-perl, libsoap-lite-perl]* - debcheckout: checkout the development repository of a Debian package. * - debclean: Clean a Debian source tree. Debclean will clean all Debian source trees below the current directory, and if requested, also remove all files that were generated from these source trees (that is .deb, .dsc and .changes files). It will keep the .diffs and original files, though, so that the binaries and other files can be rebuilt if necessary. [fakeroot]* - debcommit: Commits changes to cvs, darcs, svn, svk, tla, bzr, git, or hg, using new entries in debian/changelog as the commit message. Also supports tagging Debian package releases. [cvs | darcs | subversion | svk | tla | bzr | git-core | mercurial, libtimedate-perl] - debdiff: A program which examines two .deb files or two .changes files and reports on any difference found in their file lists. Useful for ensuring that no files were inadvertently lost between versions. Can also examine two .dsc files and report on the changes between source versions. For a deeper comparison one can use the diffoscope package. [wdiff, patchutils]* - debdiff-apply: Apply unified diffs of two Debian source packages, such as those generated by debdiff, to a target Debian source package. Any changes to debian/changelog are dealt with specially, to avoid the conflicts that changelog diffs typically produce when applied naively. May be used to check that old patches still apply to newer versions of those packages. [python3-debian, python3-unidiff, quilt] - debi: Installs the current package by using the setuid root debpkg script described below. It assumes that the current package has just been built (for example by debuild), and the .deb lives in the parent directory, and will effectively run dpkg -i on the .deb. The ability to install the package with a very short command is very useful when troubleshooting packages. - debootsnap: Combines debootstrap and snapshot.debian.org to create a chroot containing exactly the requested selection of packages. This can be used to re-create a chroot from the past, for example to reproduce a bug. The tool is also used by debrebuild to build a package in a chroot with build dependencies in the same version as recorded in the buildinfo file. [python3-pycurl, mmdebstrap] - debpkg: A wrapper for dpkg used by debi to allow convenient testing of packages. For debpkg to work, it needs to be made setuid root, and this needs to be performed by the sysadmin -- it is not installed as setuid root by default. (Note that being able to run a setuid root debpkg is effectively the same as having root access to the system, so this should be done with caution.) Having debpkg as a wrapper for dpkg can be a Good Thing (TM), as it decreases the potential for damage by accidental wrong use of commands in superuser mode (e.g., an inadvertent rm -rf * in the wrong directory is disastrous as many can attest to). - debrelease: A wrapper around dupload or dput which figures out which version to upload, and then calls dupload or dput to actually perform the upload. [dupload | dput, ssh-client] - debrebuild: A script that provided a .buildinfo file reports the instructions on how to try to reproduce the reported build. [sbuild | mmdebstrap, python3-pycurl] - debrepro: A script that tests reproducibility of Debian packages. It will build a given source directory twice, with a set of variation between the first and second build, and compare the binary packages produced. If diffoscope is installed, it is used to compare non-matching binaries. If disorderfs is installed, it is used during the build to inject non-determinism in filesystem listing operations. [faketime, diffoscope, disorderfs] - debrsign: This transfers a .changes/.dsc pair to a remote machine for signing, and runs debsign on the remote machine over an SSH connection. [gnupg | gnupg2, debian-keyring, ssh-client] - debsign: Use GNU Privacy Guard to sign the changes (and possibly dsc) files created by running dpkg-buildpackage with no-sign options. Useful if you are building a package on a remote machine and wish to sign it on a local one. This script is capable of automatically downloading the .changes and .dsc files from a remote machine. [gnupg |gnupg2, debian-keyring, ssh-client]* - debsnap: grab packages from https://snapshot.debian.org [libwww-perl, libjson-perl] - debuild: A wrapper for building a package (i.e., dpkg-buildpackage) to avoid problems with insufficient permissions and wrong paths etc. Debuild will set up the proper environment for building a package. Debuild will use the fakeroot program to build the package by default, but can be instructed to use any other gain-root command, or can even be installed setuid root. Debuild can also be used to run various of the debian/rules operations with the same root-gaining procedure. Debuild will also run lintian to check that the package does not have any major policy violations. [fakeroot, lintian, gnupg | gnupg2]* - deb-janitor: command-line client for interacting with the Debian Janitor. - deb-reversion: increases a binary package version number and repacks the package, useful for porters and the like. - deb-why-removed: shows the reason a package was removed from the archive. [libdpkg-perl] - dep3changelog: generate a changelog entry from a DEP3-style patch header. - desktop2menu: given a freedesktop.org desktop file, generate a skeleton for a menu file. [libfile-desktopentry-perl] - dget: Downloads Debian source and binary packages. Point at a .changes or .dsc to download all references files. Specify a package name to download it from the configured apt repository. [wget | curl] - diff2patches: extracts patches from a .diff.gz file placing them under debian/ or, if present, debian/patches. [patchutils] - dpkg-depcheck, dpkg-genbuilddeps: Runs a specified command (such as debian/rules build) or dpkg-buildpackage, respectively, to determine the packages used during the build process. This information can be helpful when trying to determine the packages needed in the Build-Depends etc. lines in the debian/control file. [build-essential, strace] - dscextract: extract a single file from a Debian source package. [patchutils] - dscverify: check the signature and MD5 sums of a dsc file against the most current Debian keyring on your system. [gnupg | gnupg2, debian-keyring] - edit-patch: add/edit a patch for a source package and commit the changes. [quilt | dpatch | cdbs] - getbuildlog: download package build logs from Debian auto-builders. [wget] - git-deborig: try to produce Debian orig.tar using git-archive(1). [libdpkg-perl, libgit-wrapper-perl, liblist-compare-perl, libstring-shellquote-perl, libtry-tiny-perl] - grep-excuses: grep britney's excuses to find out what is happening to your packages. [libdbd-pg-perl, libterm-size-perl, libyaml-syck-perl, wget, w3m] - hardening-check: report the hardening characteristics of a set of binaries. - list-unreleased: searches for packages marked UNRELEASED in their changelog. - ltnu (Long Time No Upload): List all uploads of packages by the given uploader or maintainer and display them ordered by the last upload of that package, oldest uploads first. - manpage-alert: locate binaries without corresponding manpages. [man-db] - mass-bug: mass-file bug reports. [bsd-mailx | mailx] - mergechanges: merge .changes files from the same release but built on different architectures. - mk-build-deps: Given a package name and/or control file, generate a binary package which may be installed to satisfy the build-dependencies of the given package. [equivs] - mk-origtargz: Rename upstream tarball, optionally changing the compression and removing unwanted files. [libfile-which-perl, unzip, xz-utils, file] - namecheck: Check project names are not already taken. - nmudiff: prepare a diff of this version (presumably an NMU against the previously released version (as per the changelog) and submit the diff to the BTS. [patchutils, mutt] - origtargz: fetch the orig tarball of a Debian package from various sources, and unpack it. [pristine-tar, pristine-lfs] - plotchangelog: display information from a changelog graphically using gnuplot. [libtimedate-perl, gnuplot] - pts-subscribe: subscribe to the PTS (Package Tracking System) for a limited period of time. [bsd-mailx | mailx, at] - rc-alert: list installed packages which have release-critical bugs. [wget | curl] - reproducible-check: reports on the reproducible status of installed packages. For more details please see <https://reproducible-builds.org>. - rmadison: remotely query the Debian archive database about packages. [liburi-perl, wget | curl] - sadt: run DEP-8 tests. [python3-debian] - salsa: manipulates salsa.debian.org repositories and users [libgitlab-api-v4-perl] - suspicious-source: output a list of files which are not common source files. [python3-magic] - svnpath: Prints the path to the Subversion repository of a Subversion checkout. Also supports calculating the paths for branches and tags in a repository independent fashion. Used by debcommit to generate svn tags. [subversion] - tagpending: runs from a Debian source tree and tags bugs that are to be closed in the latest changelog as pending. [libsoap-lite-perl] - transition-check: Check a list of source packages for involvement in transitions for which uploads to unstable are currently blocked. [libwww-perl, libyaml-syck-perl] - uscan: Automatically scan for and download upstream updates. Uscan can also call a program such as uupdate to attempt to update the Debianised version based on the new update. Whilst uscan could be used to release the updated version automatically, it is probably better not to without testing it first. Uscan can also verify detached OpenPGP signatures if upstream's signing key is known. [file, gpgv | gpgv2, gnupg | gnupg2, libfile-dirlist-perl, libfile-touch-perl, libfile-which-perl, liblwp-protocol-https-perl, libmoo-perl, libwww-perl, unzip, xz-utils]* - uupdate: Update the package with an archive or patches from an upstream author. This will be of help if you have to update your package. It will try to apply the latest diffs to your package and tell you how successful it was. [patch] - what-patch: determine what patch system, if any, a source package is using. [patchutils] - whodepends: check which maintainers' packages depend on a package. - who-permits-upload: Retrieve information about Debian Maintainer access control lists. [gnupg | gnupg2, libencode-locale-perl, libwww-perl, debian-keyring] - who-uploads: determine the most recent uploaders of a package to the Debian archive. [gnupg | gnupg2, debian-keyring, debian-maintainers, wget] - wnpp-alert: list installed packages which are orphaned or up for adoption. [wget | curl] - wnpp-check: check whether there is an open request for packaging or intention to package bug for a package. [wget | curl] - wrap-and-sort: wrap long lines and sort items in packaging files. [python3-debian] - /usr/share/doc/devscripts/examples: This directory contains examples of procmail and exim scripts for sorting mail arriving to Debian mailing lists.
PackageMaintainer	Devscripts Maintainers <devscripts@packages.debian.org>
PackageName	devscripts
PackageSection	devel
PackageVersion	2.21.7~bpo11+1
SHA-1	10156EFCA3BAC4DB7C35E75ECFCD8E12AB56D859
SHA-256	32E2DF963AB7E4E183D516C5FD6E10FBE8CDDE8066321F7FBBC2C22E5E446D95

Key	Value
FileSize	973856
MD5	8550D2657613D624990EF21090B3EB0F
PackageDescription	scripts to make the life of a Debian Package maintainer easier Contains the following scripts, dependencies/recommendations shown in brackets afterwards: . - annotate-output: run a command and prepend time and stream (O for stdout, E for stderr) for every line of output. - archpath: Prints arch (tla/Bazaar) package names. Also supports calculating the package names for other branches. [tla | bazaar] - bts: A command-line tool for accessing the Debian Bug Tracking System, both to send mails to control@bts.debian.org and to access the web pages and SOAP interface of the BTS. [www-browser, libauthen-sasl-perl, libnet-smtps-perl, libsoap-lite-perl, liburi-perl, libwww-perl, bsd-mailx | mailx] - build-rdeps: Searches for all packages that build-depend on a given package. [dctrl-tools, dose-extra, libdpkg-perl] - chdist: tool to easily play with several distributions. [dctrl-tools] - checkbashisms: check whether a /bin/sh script contains any common bash-specific constructs. - cowpoke: upload a Debian source package to a cowbuilder host and build it, optionally also signing and uploading the result to an incoming queue. [ssh-client] - cvs-debi, cvs-debc: wrappers around debi and debc respectively (see below) which allow them to be called from the CVS working directory. [cvs-buildpackage] - cvs-debrelease: wrapper around debrelease which allows it to be called from the CVS working directory. [cvs-buildpackage, dupload | dput, ssh-client] - cvs-debuild: A wrapper for cvs-buildpackage to use debuild as its package building program. [cvs-buildpackage, fakeroot, lintian, gnupg |gnupg2] - dcmd: run a given command replacing the name of a .changes or .dsc file with each of the files referenced therein. * - dd-list: given a list of packages, pretty-print it ordered by maintainer. * - debbisect: bisect snapshot.debian.org to find which change in the archive introduced a certain problem. [mmdebstrap, python3-debian] - debc: List contents of current package. Do this after a successful "debuild" to see if the package looks all right. - debchange (abbreviation dch): Modifies debian/changelog and manages version numbers for you. It will either increment the version number or add an entry for the current version, depending upon the options given to it. [libdistro-info-perl, libsoap-lite-perl]* - debcheckout: checkout the development repository of a Debian package. * - debclean: Clean a Debian source tree. Debclean will clean all Debian source trees below the current directory, and if requested, also remove all files that were generated from these source trees (that is .deb, .dsc and .changes files). It will keep the .diffs and original files, though, so that the binaries and other files can be rebuilt if necessary. [fakeroot]* - debcommit: Commits changes to cvs, darcs, svn, svk, tla, bzr, git, or hg, using new entries in debian/changelog as the commit message. Also supports tagging Debian package releases. [cvs | darcs | subversion | svk | tla | bzr | git-core | mercurial, libtimedate-perl] - debdiff: A program which examines two .deb files or two .changes files and reports on any difference found in their file lists. Useful for ensuring that no files were inadvertently lost between versions. Can also examine two .dsc files and report on the changes between source versions. For a deeper comparison one can use the diffoscope package. [wdiff, patchutils]* - debdiff-apply: Apply unified diffs of two Debian source packages, such as those generated by debdiff, to a target Debian source package. Any changes to debian/changelog are dealt with specially, to avoid the conflicts that changelog diffs typically produce when applied naively. May be used to check that old patches still apply to newer versions of those packages. [python3-debian, python3-unidiff, quilt] - debi: Installs the current package by using the setuid root debpkg script described below. It assumes that the current package has just been built (for example by debuild), and the .deb lives in the parent directory, and will effectively run dpkg -i on the .deb. The ability to install the package with a very short command is very useful when troubleshooting packages. - debpkg: A wrapper for dpkg used by debi to allow convenient testing of packages. For debpkg to work, it needs to be made setuid root, and this needs to be performed by the sysadmin -- it is not installed as setuid root by default. (Note that being able to run a setuid root debpkg is effectively the same as having root access to the system, so this should be done with caution.) Having debpkg as a wrapper for dpkg can be a Good Thing (TM), as it decreases the potential for damage by accidental wrong use of commands in superuser mode (e.g., an inadvertent rm -rf * in the wrong directory is disastrous as many can attest to). - debrelease: A wrapper around dupload or dput which figures out which version to upload, and then calls dupload or dput to actually perform the upload. [dupload | dput, ssh-client] - debrebuild: A script that provided a .buildinfo file reports the instructions on how to try to reproduce the reported build. [sbuild | mmdebstrap, libdistro-info-perl] - debrepro: A script that tests reproducibility of Debian packages. It will build a given source directory twice, with a set of variation between the first and second build, and compare the binary packages produced. If diffoscope is installed, it is used to compare non-matching binaries. If disorderfs is installed, it is used during the build to inject non-determinism in filesystem listing operations. [faketime, diffoscope, disorderfs] - debrsign: This transfers a .changes/.dsc pair to a remote machine for signing, and runs debsign on the remote machine over an SSH connection. [gnupg | gnupg2, debian-keyring, ssh-client] - debsign: Use GNU Privacy Guard to sign the changes (and possibly dsc) files created by running dpkg-buildpackage with no-sign options. Useful if you are building a package on a remote machine and wish to sign it on a local one. This script is capable of automatically downloading the .changes and .dsc files from a remote machine. [gnupg |gnupg2, debian-keyring, ssh-client]* - debsnap: grab packages from https://snapshot.debian.org [libwww-perl, libjson-perl] - debuild: A wrapper for building a package (i.e., dpkg-buildpackage) to avoid problems with insufficient permissions and wrong paths etc. Debuild will set up the proper environment for building a package. Debuild will use the fakeroot program to build the package by default, but can be instructed to use any other gain-root command, or can even be installed setuid root. Debuild can also be used to run various of the debian/rules operations with the same root-gaining procedure. Debuild will also run lintian to check that the package does not have any major policy violations. [fakeroot, lintian, gnupg | gnupg2]* - deb-reversion: increases a binary package version number and repacks the package, useful for porters and the like. - deb-why-removed: shows the reason a package was removed from the archive. [libdpkg-perl] - dep3changelog: generate a changelog entry from a DEP3-style patch header. - desktop2menu: given a freedesktop.org desktop file, generate a skeleton for a menu file. [libfile-desktopentry-perl] - dget: Downloads Debian source and binary packages. Point at a .changes or .dsc to download all references files. Specify a package name to download it from the configured apt repository. [wget | curl] - diff2patches: extracts patches from a .diff.gz file placing them under debian/ or, if present, debian/patches. [patchutils] - dpkg-depcheck, dpkg-genbuilddeps: Runs a specified command (such as debian/rules build) or dpkg-buildpackage, respectively, to determine the packages used during the build process. This information can be helpful when trying to determine the packages needed in the Build-Depends etc. lines in the debian/control file. [build-essential, strace] - dscextract: extract a single file from a Debian source package. [patchutils] - dscverify: check the signature and MD5 sums of a dsc file against the most current Debian keyring on your system. [gnupg | gnupg2, debian-keyring] - edit-patch: add/edit a patch for a source package and commit the changes. [quilt | dpatch | cdbs] - getbuildlog: download package build logs from Debian auto-builders. [wget] - git-deborig: try to produce Debian orig.tar using git-archive(1). [libdpkg-perl, libgit-wrapper-perl, liblist-compare-perl, libstring-shellquote-perl, libtry-tiny-perl] - grep-excuses: grep britney's excuses to find out what is happening to your packages. [libdbd-pg-perl, libterm-size-perl, libyaml-syck-perl, wget, w3m] - hardening-check: report the hardening characteristics of a set of binaries. - list-unreleased: searches for packages marked UNRELEASED in their changelog. - ltnu (Long Time No Upload): List all uploads of packages by the given uploader or maintainer and display them ordered by the last upload of that package, oldest uploads first. - manpage-alert: locate binaries without corresponding manpages. [man-db] - mass-bug: mass-file bug reports. [bsd-mailx | mailx] - mergechanges: merge .changes files from the same release but built on different architectures. - mk-build-deps: Given a package name and/or control file, generate a binary package which may be installed to satisfy the build-dependencies of the given package. [equivs] - mk-origtargz: Rename upstream tarball, optionally changing the compression and removing unwanted files. [libfile-which-perl, unzip, xz-utils, file] - namecheck: Check project names are not already taken. - nmudiff: prepare a diff of this version (presumably an NMU against the previously released version (as per the changelog) and submit the diff to the BTS. [patchutils, mutt] - origtargz: fetch the orig tarball of a Debian package from various sources, and unpack it. [pristine-tar] - plotchangelog: display information from a changelog graphically using gnuplot. [libtimedate-perl, gnuplot] - pts-subscribe: subscribe to the PTS (Package Tracking System) for a limited period of time. [bsd-mailx | mailx, at] - rc-alert: list installed packages which have release-critical bugs. [wget | curl] - reproducible-check: reports on the reproducible status of installed packages. For more details please see <https://reproducible-builds.org>. - rmadison: remotely query the Debian archive database about packages. [liburi-perl, wget | curl] - sadt: run DEP-8 tests. [python3-debian] - salsa: manipulates salsa.debian.org repositories and users [libgitlab-api-v4-perl] - suspicious-source: output a list of files which are not common source files. [python3-magic] - svnpath: Prints the path to the Subversion repository of a Subversion checkout. Also supports calculating the paths for branches and tags in a repository independent fashion. Used by debcommit to generate svn tags. [subversion] - tagpending: runs from a Debian source tree and tags bugs that are to be closed in the latest changelog as pending. [libsoap-lite-perl] - transition-check: Check a list of source packages for involvement in transitions for which uploads to unstable are currently blocked. [libwww-perl, libyaml-syck-perl] - uscan: Automatically scan for and download upstream updates. Uscan can also call a program such as uupdate to attempt to update the Debianised version based on the new update. Whilst uscan could be used to release the updated version automatically, it is probably better not to without testing it first. Uscan can also verify detached OpenPGP signatures if upstream's signing key is known. [file, gpgv | gpgv2, gnupg | gnupg2, libfile-dirlist-perl, libfile-touch-perl, libfile-which-perl, liblwp-protocol-https-perl, libmoo-perl, libwww-perl, unzip, xz-utils]* - uupdate: Update the package with an archive or patches from an upstream author. This will be of help if you have to update your package. It will try to apply the latest diffs to your package and tell you how successful it was. [patch] - what-patch: determine what patch system, if any, a source package is using. [patchutils] - whodepends: check which maintainers' packages depend on a package. - who-permits-upload: Retrieve information about Debian Maintainer access control lists. [gnupg | gnupg2, libencode-locale-perl, libwww-perl, debian-keyring] - who-uploads: determine the most recent uploaders of a package to the Debian archive. [gnupg | gnupg2, debian-keyring, debian-maintainers, wget] - wnpp-alert: list installed packages which are orphaned or up for adoption. [wget | curl] - wnpp-check: check whether there is an open request for packaging or intention to package bug for a package. [wget | curl] - wrap-and-sort: wrap long lines and sort items in packaging files. [python3-debian] - /usr/share/doc/devscripts/examples: This directory contains examples of procmail and exim scripts for sorting mail arriving to Debian mailing lists.
PackageMaintainer	Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
PackageName	devscripts
PackageSection	devel
PackageVersion	2.21.1ubuntu1
SHA-1	1147B1C4FF0B162D5EF13B7F34A79C6F3C36A821
SHA-256	43DB39BA0B8AB1C7B99A0795BB38BD796EDDBFCB352DBCAFB6C918800DB3E7D6

Key	Value
FileSize	1092632
MD5	380DE6468B6D21D987466246F2E14A6E
PackageDescription	scripts to make the life of a Debian Package maintainer easier Contains the following scripts, dependencies/recommendations shown in brackets afterwards: . - annotate-output: run a command and prepend time and stream (O for stdout, E for stderr) for every line of output. - archpath: Prints arch (tla/Bazaar) package names. Also supports calculating the package names for other branches. [tla | bazaar] - bts: A command-line tool for accessing the Debian Bug Tracking System, both to send mails to control@bts.debian.org and to access the web pages and SOAP interface of the BTS. [www-browser, libauthen-sasl-perl, libnet-smtps-perl, libsoap-lite-perl, liburi-perl, libwww-perl, bsd-mailx | mailx] - build-rdeps: Searches for all packages that build-depend on a given package. [dctrl-tools, dose-extra, libdpkg-perl] - chdist: tool to easily play with several distributions. [dctrl-tools] - checkbashisms: check whether a /bin/sh script contains any common bash-specific constructs. - cowpoke: upload a Debian source package to a cowbuilder host and build it, optionally also signing and uploading the result to an incoming queue. [ssh-client] - cvs-debi, cvs-debc: wrappers around debi and debc respectively (see below) which allow them to be called from the CVS working directory. [cvs-buildpackage] - cvs-debrelease: wrapper around debrelease which allows it to be called from the CVS working directory. [cvs-buildpackage, dupload | dput, ssh-client] - cvs-debuild: A wrapper for cvs-buildpackage to use debuild as its package building program. [cvs-buildpackage, fakeroot, lintian, gnupg |gnupg2] - dcmd: run a given command replacing the name of a .changes or .dsc file with each of the files referenced therein. * - dd-list: given a list of packages, pretty-print it ordered by maintainer. * - debbisect: bisect snapshot.debian.org to find which change in the archive introduced a certain problem. [mmdebstrap, python3-debian] - debc: List contents of current package. Do this after a successful "debuild" to see if the package looks all right. - debchange (abbreviation dch): Modifies debian/changelog and manages version numbers for you. It will either increment the version number or add an entry for the current version, depending upon the options given to it. [libdistro-info-perl, libsoap-lite-perl]* - debcheckout: checkout the development repository of a Debian package. * - debclean: Clean a Debian source tree. Debclean will clean all Debian source trees below the current directory, and if requested, also remove all files that were generated from these source trees (that is .deb, .dsc and .changes files). It will keep the .diffs and original files, though, so that the binaries and other files can be rebuilt if necessary. [fakeroot]* - debcommit: Commits changes to cvs, darcs, svn, svk, tla, bzr, git, or hg, using new entries in debian/changelog as the commit message. Also supports tagging Debian package releases. [cvs | darcs | subversion | svk | tla | bzr | git-core | mercurial, libtimedate-perl] - debdiff: A program which examines two .deb files or two .changes files and reports on any difference found in their file lists. Useful for ensuring that no files were inadvertently lost between versions. Can also examine two .dsc files and report on the changes between source versions. For a deeper comparison one can use the diffoscope package. [wdiff, patchutils]* - debdiff-apply: Apply unified diffs of two Debian source packages, such as those generated by debdiff, to a target Debian source package. Any changes to debian/changelog are dealt with specially, to avoid the conflicts that changelog diffs typically produce when applied naively. May be used to check that old patches still apply to newer versions of those packages. [python3-debian, python3-unidiff, quilt] - debi: Installs the current package by using the setuid root debpkg script described below. It assumes that the current package has just been built (for example by debuild), and the .deb lives in the parent directory, and will effectively run dpkg -i on the .deb. The ability to install the package with a very short command is very useful when troubleshooting packages. - debpkg: A wrapper for dpkg used by debi to allow convenient testing of packages. For debpkg to work, it needs to be made setuid root, and this needs to be performed by the sysadmin -- it is not installed as setuid root by default. (Note that being able to run a setuid root debpkg is effectively the same as having root access to the system, so this should be done with caution.) Having debpkg as a wrapper for dpkg can be a Good Thing (TM), as it decreases the potential for damage by accidental wrong use of commands in superuser mode (e.g., an inadvertent rm -rf * in the wrong directory is disastrous as many can attest to). - debrelease: A wrapper around dupload or dput which figures out which version to upload, and then calls dupload or dput to actually perform the upload. [dupload | dput, ssh-client] - debrebuild: A script that provided a .buildinfo file reports the instructions on how to try to reproduce the reported build. [sbuild | mmdebstrap, libdistro-info-perl] - debrepro: A script that tests reproducibility of Debian packages. It will build a given source directory twice, with a set of variation between the first and second build, and compare the binary packages produced. If diffoscope is installed, it is used to compare non-matching binaries. If disorderfs is installed, it is used during the build to inject non-determinism in filesystem listing operations. [faketime, diffoscope, disorderfs] - debrsign: This transfers a .changes/.dsc pair to a remote machine for signing, and runs debsign on the remote machine over an SSH connection. [gnupg | gnupg2, debian-keyring, ssh-client] - debsign: Use GNU Privacy Guard to sign the changes (and possibly dsc) files created by running dpkg-buildpackage with no-sign options. Useful if you are building a package on a remote machine and wish to sign it on a local one. This script is capable of automatically downloading the .changes and .dsc files from a remote machine. [gnupg |gnupg2, debian-keyring, ssh-client]* - debsnap: grab packages from https://snapshot.debian.org [libwww-perl, libjson-perl] - debuild: A wrapper for building a package (i.e., dpkg-buildpackage) to avoid problems with insufficient permissions and wrong paths etc. Debuild will set up the proper environment for building a package. Debuild will use the fakeroot program to build the package by default, but can be instructed to use any other gain-root command, or can even be installed setuid root. Debuild can also be used to run various of the debian/rules operations with the same root-gaining procedure. Debuild will also run lintian to check that the package does not have any major policy violations. [fakeroot, lintian, gnupg | gnupg2]* - deb-reversion: increases a binary package version number and repacks the package, useful for porters and the like. - deb-why-removed: shows the reason a package was removed from the archive. [libdpkg-perl] - dep3changelog: generate a changelog entry from a DEP3-style patch header. - desktop2menu: given a freedesktop.org desktop file, generate a skeleton for a menu file. [libfile-desktopentry-perl] - dget: Downloads Debian source and binary packages. Point at a .changes or .dsc to download all references files. Specify a package name to download it from the configured apt repository. [wget | curl] - diff2patches: extracts patches from a .diff.gz file placing them under debian/ or, if present, debian/patches. [patchutils] - dpkg-depcheck, dpkg-genbuilddeps: Runs a specified command (such as debian/rules build) or dpkg-buildpackage, respectively, to determine the packages used during the build process. This information can be helpful when trying to determine the packages needed in the Build-Depends etc. lines in the debian/control file. [build-essential, strace] - dscextract: extract a single file from a Debian source package. [patchutils] - dscverify: check the signature and MD5 sums of a dsc file against the most current Debian keyring on your system. [gnupg | gnupg2, debian-keyring] - edit-patch: add/edit a patch for a source package and commit the changes. [quilt | dpatch | cdbs] - getbuildlog: download package build logs from Debian auto-builders. [wget] - git-deborig: try to produce Debian orig.tar using git-archive(1). [libdpkg-perl, libgit-wrapper-perl, liblist-compare-perl, libstring-shellquote-perl, libtry-tiny-perl] - grep-excuses: grep britney's excuses to find out what is happening to your packages. [libdbd-pg-perl, libterm-size-perl, libyaml-syck-perl, wget, w3m] - hardening-check: report the hardening characteristics of a set of binaries. - list-unreleased: searches for packages marked UNRELEASED in their changelog. - ltnu (Long Time No Upload): List all uploads of packages by the given uploader or maintainer and display them ordered by the last upload of that package, oldest uploads first. - manpage-alert: locate binaries without corresponding manpages. [man-db] - mass-bug: mass-file bug reports. [bsd-mailx | mailx] - mergechanges: merge .changes files from the same release but built on different architectures. - mk-build-deps: Given a package name and/or control file, generate a binary package which may be installed to satisfy the build-dependencies of the given package. [equivs] - mk-origtargz: Rename upstream tarball, optionally changing the compression and removing unwanted files. [libfile-which-perl, unzip, xz-utils, file] - namecheck: Check project names are not already taken. - nmudiff: prepare a diff of this version (presumably an NMU against the previously released version (as per the changelog) and submit the diff to the BTS. [patchutils, mutt] - origtargz: fetch the orig tarball of a Debian package from various sources, and unpack it. [pristine-tar] - plotchangelog: display information from a changelog graphically using gnuplot. [libtimedate-perl, gnuplot] - pts-subscribe: subscribe to the PTS (Package Tracking System) for a limited period of time. [bsd-mailx | mailx, at] - rc-alert: list installed packages which have release-critical bugs. [wget | curl] - reproducible-check: reports on the reproducible status of installed packages. For more details please see <https://reproducible-builds.org>. - rmadison: remotely query the Debian archive database about packages. [liburi-perl, wget | curl] - sadt: run DEP-8 tests. [python3-debian] - salsa: manipulates salsa.debian.org repositories and users [libgitlab-api-v4-perl] - suspicious-source: output a list of files which are not common source files. [python3-magic] - svnpath: Prints the path to the Subversion repository of a Subversion checkout. Also supports calculating the paths for branches and tags in a repository independent fashion. Used by debcommit to generate svn tags. [subversion] - tagpending: runs from a Debian source tree and tags bugs that are to be closed in the latest changelog as pending. [libsoap-lite-perl] - transition-check: Check a list of source packages for involvement in transitions for which uploads to unstable are currently blocked. [libwww-perl, libyaml-syck-perl] - uscan: Automatically scan for and download upstream updates. Uscan can also call a program such as uupdate to attempt to update the Debianised version based on the new update. Whilst uscan could be used to release the updated version automatically, it is probably better not to without testing it first. Uscan can also verify detached OpenPGP signatures if upstream's signing key is known. [file, gpgv | gpgv2, gnupg | gnupg2, libfile-dirlist-perl, libfile-touch-perl, libfile-which-perl, liblwp-protocol-https-perl, libmoo-perl, libwww-perl, unzip, xz-utils]* - uupdate: Update the package with an archive or patches from an upstream author. This will be of help if you have to update your package. It will try to apply the latest diffs to your package and tell you how successful it was. [patch] - what-patch: determine what patch system, if any, a source package is using. [patchutils] - whodepends: check which maintainers' packages depend on a package. - who-permits-upload: Retrieve information about Debian Maintainer access control lists. [gnupg | gnupg2, libencode-locale-perl, libwww-perl, debian-keyring] - who-uploads: determine the most recent uploaders of a package to the Debian archive. [gnupg | gnupg2, debian-keyring, debian-maintainers, wget] - wnpp-alert: list installed packages which are orphaned or up for adoption. [wget | curl] - wnpp-check: check whether there is an open request for packaging or intention to package bug for a package. [wget | curl] - wrap-and-sort: wrap long lines and sort items in packaging files. [python3-debian] - /usr/share/doc/devscripts/examples: This directory contains examples of procmail and exim scripts for sorting mail arriving to Debian mailing lists.
PackageMaintainer	Devscripts Maintainers <devscripts@packages.debian.org>
PackageName	devscripts
PackageSection	devel
PackageVersion	2.21.3+deb11u1~bpo10+1
SHA-1	1236C981B1C171FB1C322D778063882D2AC41165
SHA-256	2DBE101B69750A6782D1DE2D3EF9159C6F91ED1E06DBF03653536ACB82D044CE

Key	Value
FileSize	1093676
MD5	9A68B0BD51F8AB67C01F71F4F77EB02D
PackageDescription	scripts to make the life of a Debian Package maintainer easier Contains the following scripts, dependencies/recommendations shown in brackets afterwards: . - annotate-output: run a command and prepend time and stream (O for stdout, E for stderr) for every line of output. - archpath: Prints arch (tla/Bazaar) package names. Also supports calculating the package names for other branches. [tla | bazaar] - bts: A command-line tool for accessing the Debian Bug Tracking System, both to send mails to control@bts.debian.org and to access the web pages and SOAP interface of the BTS. [www-browser, libauthen-sasl-perl, libnet-smtps-perl, libsoap-lite-perl, liburi-perl, libwww-perl, bsd-mailx | mailx] - build-rdeps: Searches for all packages that build-depend on a given package. [dctrl-tools, dose-extra, libdpkg-perl] - chdist: tool to easily play with several distributions. [dctrl-tools] - checkbashisms: check whether a /bin/sh script contains any common bash-specific constructs. - cowpoke: upload a Debian source package to a cowbuilder host and build it, optionally also signing and uploading the result to an incoming queue. [ssh-client] - cvs-debi, cvs-debc: wrappers around debi and debc respectively (see below) which allow them to be called from the CVS working directory. [cvs-buildpackage] - cvs-debrelease: wrapper around debrelease which allows it to be called from the CVS working directory. [cvs-buildpackage, dupload | dput, ssh-client] - cvs-debuild: A wrapper for cvs-buildpackage to use debuild as its package building program. [cvs-buildpackage, fakeroot, lintian, gnupg |gnupg2] - dcmd: run a given command replacing the name of a .changes or .dsc file with each of the files referenced therein. * - dd-list: given a list of packages, pretty-print it ordered by maintainer. * - debbisect: bisect snapshot.debian.org to find which change in the archive introduced a certain problem. [mmdebstrap, python3-debian] - debc: List contents of current package. Do this after a successful "debuild" to see if the package looks all right. - debchange (abbreviation dch): Modifies debian/changelog and manages version numbers for you. It will either increment the version number or add an entry for the current version, depending upon the options given to it. [libdistro-info-perl, libsoap-lite-perl]* - debcheckout: checkout the development repository of a Debian package. * - debclean: Clean a Debian source tree. Debclean will clean all Debian source trees below the current directory, and if requested, also remove all files that were generated from these source trees (that is .deb, .dsc and .changes files). It will keep the .diffs and original files, though, so that the binaries and other files can be rebuilt if necessary. [fakeroot]* - debcommit: Commits changes to cvs, darcs, svn, svk, tla, bzr, git, or hg, using new entries in debian/changelog as the commit message. Also supports tagging Debian package releases. [cvs | darcs | subversion | svk | tla | bzr | git-core | mercurial, libtimedate-perl] - debdiff: A program which examines two .deb files or two .changes files and reports on any difference found in their file lists. Useful for ensuring that no files were inadvertently lost between versions. Can also examine two .dsc files and report on the changes between source versions. For a deeper comparison one can use the diffoscope package. [wdiff, patchutils]* - debdiff-apply: Apply unified diffs of two Debian source packages, such as those generated by debdiff, to a target Debian source package. Any changes to debian/changelog are dealt with specially, to avoid the conflicts that changelog diffs typically produce when applied naively. May be used to check that old patches still apply to newer versions of those packages. [python3-debian, python3-unidiff, quilt] - debi: Installs the current package by using the setuid root debpkg script described below. It assumes that the current package has just been built (for example by debuild), and the .deb lives in the parent directory, and will effectively run dpkg -i on the .deb. The ability to install the package with a very short command is very useful when troubleshooting packages. - debpkg: A wrapper for dpkg used by debi to allow convenient testing of packages. For debpkg to work, it needs to be made setuid root, and this needs to be performed by the sysadmin -- it is not installed as setuid root by default. (Note that being able to run a setuid root debpkg is effectively the same as having root access to the system, so this should be done with caution.) Having debpkg as a wrapper for dpkg can be a Good Thing (TM), as it decreases the potential for damage by accidental wrong use of commands in superuser mode (e.g., an inadvertent rm -rf * in the wrong directory is disastrous as many can attest to). - debrelease: A wrapper around dupload or dput which figures out which version to upload, and then calls dupload or dput to actually perform the upload. [dupload | dput, ssh-client] - debrebuild: A script that provided a .buildinfo file reports the instructions on how to try to reproduce the reported build. [sbuild | mmdebstrap, libdistro-info-perl] - debrepro: A script that tests reproducibility of Debian packages. It will build a given source directory twice, with a set of variation between the first and second build, and compare the binary packages produced. If diffoscope is installed, it is used to compare non-matching binaries. If disorderfs is installed, it is used during the build to inject non-determinism in filesystem listing operations. [faketime, diffoscope, disorderfs] - debrsign: This transfers a .changes/.dsc pair to a remote machine for signing, and runs debsign on the remote machine over an SSH connection. [gnupg | gnupg2, debian-keyring, ssh-client] - debsign: Use GNU Privacy Guard to sign the changes (and possibly dsc) files created by running dpkg-buildpackage with no-sign options. Useful if you are building a package on a remote machine and wish to sign it on a local one. This script is capable of automatically downloading the .changes and .dsc files from a remote machine. [gnupg |gnupg2, debian-keyring, ssh-client]* - debsnap: grab packages from https://snapshot.debian.org [libwww-perl, libjson-perl] - debuild: A wrapper for building a package (i.e., dpkg-buildpackage) to avoid problems with insufficient permissions and wrong paths etc. Debuild will set up the proper environment for building a package. Debuild will use the fakeroot program to build the package by default, but can be instructed to use any other gain-root command, or can even be installed setuid root. Debuild can also be used to run various of the debian/rules operations with the same root-gaining procedure. Debuild will also run lintian to check that the package does not have any major policy violations. [fakeroot, lintian, gnupg | gnupg2]* - deb-reversion: increases a binary package version number and repacks the package, useful for porters and the like. - deb-why-removed: shows the reason a package was removed from the archive. [libdpkg-perl] - dep3changelog: generate a changelog entry from a DEP3-style patch header. - desktop2menu: given a freedesktop.org desktop file, generate a skeleton for a menu file. [libfile-desktopentry-perl] - dget: Downloads Debian source and binary packages. Point at a .changes or .dsc to download all references files. Specify a package name to download it from the configured apt repository. [wget | curl] - diff2patches: extracts patches from a .diff.gz file placing them under debian/ or, if present, debian/patches. [patchutils] - dpkg-depcheck, dpkg-genbuilddeps: Runs a specified command (such as debian/rules build) or dpkg-buildpackage, respectively, to determine the packages used during the build process. This information can be helpful when trying to determine the packages needed in the Build-Depends etc. lines in the debian/control file. [build-essential, strace] - dscextract: extract a single file from a Debian source package. [patchutils] - dscverify: check the signature and MD5 sums of a dsc file against the most current Debian keyring on your system. [gnupg | gnupg2, debian-keyring] - edit-patch: add/edit a patch for a source package and commit the changes. [quilt | dpatch | cdbs] - getbuildlog: download package build logs from Debian auto-builders. [wget] - git-deborig: try to produce Debian orig.tar using git-archive(1). [libdpkg-perl, libgit-wrapper-perl, liblist-compare-perl, libstring-shellquote-perl, libtry-tiny-perl] - grep-excuses: grep britney's excuses to find out what is happening to your packages. [libdbd-pg-perl, libterm-size-perl, libyaml-syck-perl, wget, w3m] - hardening-check: report the hardening characteristics of a set of binaries. - list-unreleased: searches for packages marked UNRELEASED in their changelog. - ltnu (Long Time No Upload): List all uploads of packages by the given uploader or maintainer and display them ordered by the last upload of that package, oldest uploads first. - manpage-alert: locate binaries without corresponding manpages. [man-db] - mass-bug: mass-file bug reports. [bsd-mailx | mailx] - mergechanges: merge .changes files from the same release but built on different architectures. - mk-build-deps: Given a package name and/or control file, generate a binary package which may be installed to satisfy the build-dependencies of the given package. [equivs] - mk-origtargz: Rename upstream tarball, optionally changing the compression and removing unwanted files. [libfile-which-perl, unzip, xz-utils, file] - namecheck: Check project names are not already taken. - nmudiff: prepare a diff of this version (presumably an NMU against the previously released version (as per the changelog) and submit the diff to the BTS. [patchutils, mutt] - origtargz: fetch the orig tarball of a Debian package from various sources, and unpack it. [pristine-tar] - plotchangelog: display information from a changelog graphically using gnuplot. [libtimedate-perl, gnuplot] - pts-subscribe: subscribe to the PTS (Package Tracking System) for a limited period of time. [bsd-mailx | mailx, at] - rc-alert: list installed packages which have release-critical bugs. [wget | curl] - reproducible-check: reports on the reproducible status of installed packages. For more details please see <https://reproducible-builds.org>. - rmadison: remotely query the Debian archive database about packages. [liburi-perl, wget | curl] - sadt: run DEP-8 tests. [python3-debian] - salsa: manipulates salsa.debian.org repositories and users [libgitlab-api-v4-perl] - suspicious-source: output a list of files which are not common source files. [python3-magic] - svnpath: Prints the path to the Subversion repository of a Subversion checkout. Also supports calculating the paths for branches and tags in a repository independent fashion. Used by debcommit to generate svn tags. [subversion] - tagpending: runs from a Debian source tree and tags bugs that are to be closed in the latest changelog as pending. [libsoap-lite-perl] - transition-check: Check a list of source packages for involvement in transitions for which uploads to unstable are currently blocked. [libwww-perl, libyaml-syck-perl] - uscan: Automatically scan for and download upstream updates. Uscan can also call a program such as uupdate to attempt to update the Debianised version based on the new update. Whilst uscan could be used to release the updated version automatically, it is probably better not to without testing it first. Uscan can also verify detached OpenPGP signatures if upstream's signing key is known. [file, gpgv | gpgv2, gnupg | gnupg2, libfile-dirlist-perl, libfile-touch-perl, libfile-which-perl, liblwp-protocol-https-perl, libmoo-perl, libwww-perl, unzip, xz-utils]* - uupdate: Update the package with an archive or patches from an upstream author. This will be of help if you have to update your package. It will try to apply the latest diffs to your package and tell you how successful it was. [patch] - what-patch: determine what patch system, if any, a source package is using. [patchutils] - whodepends: check which maintainers' packages depend on a package. - who-permits-upload: Retrieve information about Debian Maintainer access control lists. [gnupg | gnupg2, libencode-locale-perl, libwww-perl, debian-keyring] - who-uploads: determine the most recent uploaders of a package to the Debian archive. [gnupg | gnupg2, debian-keyring, debian-maintainers, wget] - wnpp-alert: list installed packages which are orphaned or up for adoption. [wget | curl] - wnpp-check: check whether there is an open request for packaging or intention to package bug for a package. [wget | curl] - wrap-and-sort: wrap long lines and sort items in packaging files. [python3-debian] - /usr/share/doc/devscripts/examples: This directory contains examples of procmail and exim scripts for sorting mail arriving to Debian mailing lists.
PackageMaintainer	Devscripts Maintainers <devscripts@packages.debian.org>
PackageName	devscripts
PackageSection	devel
PackageVersion	2.21.4~bpo11+1
SHA-1	19033F6044C53AED907656954EDAFBF27CEE3869
SHA-256	AE6BCA10258FA416EC8259B345FE567B852F1224B3C0902691BAE879CD9F6C33

Key	Value
FileSize	1102296
MD5	796BFA9FEF4033751D626B81F2C725B1
PackageDescription	scripts to make the life of a Debian Package maintainer easier Contains the following scripts, dependencies/recommendations shown in brackets afterwards: . - annotate-output: run a command and prepend time and stream (O for stdout, E for stderr) for every line of output. - archpath: Prints arch (tla/Bazaar) package names. Also supports calculating the package names for other branches. [tla | bazaar] - bts: A command-line tool for accessing the Debian Bug Tracking System, both to send mails to control@bts.debian.org and to access the web pages and SOAP interface of the BTS. [www-browser, libauthen-sasl-perl, libnet-smtps-perl, libsoap-lite-perl, liburi-perl, libwww-perl, bsd-mailx | mailx] - build-rdeps: Searches for all packages that build-depend on a given package. [dctrl-tools, dose-extra, libdpkg-perl] - chdist: tool to easily play with several distributions. [dctrl-tools] - checkbashisms: check whether a /bin/sh script contains any common bash-specific constructs. - cowpoke: upload a Debian source package to a cowbuilder host and build it, optionally also signing and uploading the result to an incoming queue. [ssh-client] - cvs-debi, cvs-debc: wrappers around debi and debc respectively (see below) which allow them to be called from the CVS working directory. [cvs-buildpackage] - cvs-debrelease: wrapper around debrelease which allows it to be called from the CVS working directory. [cvs-buildpackage, dupload | dput, ssh-client] - cvs-debuild: A wrapper for cvs-buildpackage to use debuild as its package building program. [cvs-buildpackage, fakeroot, lintian, gnupg |gnupg2] - dcmd: run a given command replacing the name of a .changes or .dsc file with each of the files referenced therein. * - dd-list: given a list of packages, pretty-print it ordered by maintainer. * - debbisect: bisect snapshot.debian.org to find which change in the archive introduced a certain problem. [mmdebstrap, python3-debian] - debc: List contents of current package. Do this after a successful "debuild" to see if the package looks all right. - debchange (abbreviation dch): Modifies debian/changelog and manages version numbers for you. It will either increment the version number or add an entry for the current version, depending upon the options given to it. [libdistro-info-perl, libsoap-lite-perl]* - debcheckout: checkout the development repository of a Debian package. * - debclean: Clean a Debian source tree. Debclean will clean all Debian source trees below the current directory, and if requested, also remove all files that were generated from these source trees (that is .deb, .dsc and .changes files). It will keep the .diffs and original files, though, so that the binaries and other files can be rebuilt if necessary. [fakeroot]* - debcommit: Commits changes to cvs, darcs, svn, svk, tla, bzr, git, or hg, using new entries in debian/changelog as the commit message. Also supports tagging Debian package releases. [cvs | darcs | subversion | svk | tla | bzr | git-core | mercurial, libtimedate-perl] - debdiff: A program which examines two .deb files or two .changes files and reports on any difference found in their file lists. Useful for ensuring that no files were inadvertently lost between versions. Can also examine two .dsc files and report on the changes between source versions. For a deeper comparison one can use the diffoscope package. [wdiff, patchutils]* - debdiff-apply: Apply unified diffs of two Debian source packages, such as those generated by debdiff, to a target Debian source package. Any changes to debian/changelog are dealt with specially, to avoid the conflicts that changelog diffs typically produce when applied naively. May be used to check that old patches still apply to newer versions of those packages. [python3-debian, python3-unidiff, quilt] - debi: Installs the current package by using the setuid root debpkg script described below. It assumes that the current package has just been built (for example by debuild), and the .deb lives in the parent directory, and will effectively run dpkg -i on the .deb. The ability to install the package with a very short command is very useful when troubleshooting packages. - debootsnap: Combines debootstrap and snapshot.debian.org to create a chroot containing exactly the requested selection of packages. This can be used to re-create a chroot from the past, for example to reproduce a bug. The tool is also used by debrebuild to build a package in a chroot with build dependencies in the same version as recorded in the buildinfo file. [python3-pycurl, mmdebstrap] - debpkg: A wrapper for dpkg used by debi to allow convenient testing of packages. For debpkg to work, it needs to be made setuid root, and this needs to be performed by the sysadmin -- it is not installed as setuid root by default. (Note that being able to run a setuid root debpkg is effectively the same as having root access to the system, so this should be done with caution.) Having debpkg as a wrapper for dpkg can be a Good Thing (TM), as it decreases the potential for damage by accidental wrong use of commands in superuser mode (e.g., an inadvertent rm -rf * in the wrong directory is disastrous as many can attest to). - debrelease: A wrapper around dupload or dput which figures out which version to upload, and then calls dupload or dput to actually perform the upload. [dupload | dput, ssh-client] - debrebuild: A script that provided a .buildinfo file reports the instructions on how to try to reproduce the reported build. [sbuild | mmdebstrap, python3-pycurl] - debrepro: A script that tests reproducibility of Debian packages. It will build a given source directory twice, with a set of variation between the first and second build, and compare the binary packages produced. If diffoscope is installed, it is used to compare non-matching binaries. If disorderfs is installed, it is used during the build to inject non-determinism in filesystem listing operations. [faketime, diffoscope, disorderfs] - debrsign: This transfers a .changes/.dsc pair to a remote machine for signing, and runs debsign on the remote machine over an SSH connection. [gnupg | gnupg2, debian-keyring, ssh-client] - debsign: Use GNU Privacy Guard to sign the changes (and possibly dsc) files created by running dpkg-buildpackage with no-sign options. Useful if you are building a package on a remote machine and wish to sign it on a local one. This script is capable of automatically downloading the .changes and .dsc files from a remote machine. [gnupg |gnupg2, debian-keyring, ssh-client]* - debsnap: grab packages from https://snapshot.debian.org [libwww-perl, libjson-perl] - debuild: A wrapper for building a package (i.e., dpkg-buildpackage) to avoid problems with insufficient permissions and wrong paths etc. Debuild will set up the proper environment for building a package. Debuild will use the fakeroot program to build the package by default, but can be instructed to use any other gain-root command, or can even be installed setuid root. Debuild can also be used to run various of the debian/rules operations with the same root-gaining procedure. Debuild will also run lintian to check that the package does not have any major policy violations. [fakeroot, lintian, gnupg | gnupg2]* - deb-janitor: command-line client for interacting with the Debian Janitor. - deb-reversion: increases a binary package version number and repacks the package, useful for porters and the like. - deb-why-removed: shows the reason a package was removed from the archive. [libdpkg-perl] - dep3changelog: generate a changelog entry from a DEP3-style patch header. - desktop2menu: given a freedesktop.org desktop file, generate a skeleton for a menu file. [libfile-desktopentry-perl] - dget: Downloads Debian source and binary packages. Point at a .changes or .dsc to download all references files. Specify a package name to download it from the configured apt repository. [wget | curl] - diff2patches: extracts patches from a .diff.gz file placing them under debian/ or, if present, debian/patches. [patchutils] - dpkg-depcheck, dpkg-genbuilddeps: Runs a specified command (such as debian/rules build) or dpkg-buildpackage, respectively, to determine the packages used during the build process. This information can be helpful when trying to determine the packages needed in the Build-Depends etc. lines in the debian/control file. [build-essential, strace] - dscextract: extract a single file from a Debian source package. [patchutils] - dscverify: check the signature and MD5 sums of a dsc file against the most current Debian keyring on your system. [gnupg | gnupg2, debian-keyring] - edit-patch: add/edit a patch for a source package and commit the changes. [quilt | dpatch | cdbs] - getbuildlog: download package build logs from Debian auto-builders. [wget] - git-deborig: try to produce Debian orig.tar using git-archive(1). [libdpkg-perl, libgit-wrapper-perl, liblist-compare-perl, libstring-shellquote-perl, libtry-tiny-perl] - grep-excuses: grep britney's excuses to find out what is happening to your packages. [libdbd-pg-perl, libterm-size-perl, libyaml-syck-perl, wget, w3m] - hardening-check: report the hardening characteristics of a set of binaries. - list-unreleased: searches for packages marked UNRELEASED in their changelog. - ltnu (Long Time No Upload): List all uploads of packages by the given uploader or maintainer and display them ordered by the last upload of that package, oldest uploads first. - manpage-alert: locate binaries without corresponding manpages. [man-db] - mass-bug: mass-file bug reports. [bsd-mailx | mailx] - mergechanges: merge .changes files from the same release but built on different architectures. - mk-build-deps: Given a package name and/or control file, generate a binary package which may be installed to satisfy the build-dependencies of the given package. [equivs] - mk-origtargz: Rename upstream tarball, optionally changing the compression and removing unwanted files. [libfile-which-perl, unzip, xz-utils, file] - namecheck: Check project names are not already taken. - nmudiff: prepare a diff of this version (presumably an NMU against the previously released version (as per the changelog) and submit the diff to the BTS. [patchutils, mutt] - origtargz: fetch the orig tarball of a Debian package from various sources, and unpack it. [pristine-tar, pristine-lfs] - plotchangelog: display information from a changelog graphically using gnuplot. [libtimedate-perl, gnuplot] - pts-subscribe: subscribe to the PTS (Package Tracking System) for a limited period of time. [bsd-mailx | mailx, at] - rc-alert: list installed packages which have release-critical bugs. [wget | curl] - reproducible-check: reports on the reproducible status of installed packages. For more details please see <https://reproducible-builds.org>. - rmadison: remotely query the Debian archive database about packages. [liburi-perl, wget | curl] - sadt: run DEP-8 tests. [python3-debian] - salsa: manipulates salsa.debian.org repositories and users [libgitlab-api-v4-perl] - suspicious-source: output a list of files which are not common source files. [python3-magic] - svnpath: Prints the path to the Subversion repository of a Subversion checkout. Also supports calculating the paths for branches and tags in a repository independent fashion. Used by debcommit to generate svn tags. [subversion] - tagpending: runs from a Debian source tree and tags bugs that are to be closed in the latest changelog as pending. [libsoap-lite-perl] - transition-check: Check a list of source packages for involvement in transitions for which uploads to unstable are currently blocked. [libwww-perl, libyaml-syck-perl] - uscan: Automatically scan for and download upstream updates. Uscan can also call a program such as uupdate to attempt to update the Debianised version based on the new update. Whilst uscan could be used to release the updated version automatically, it is probably better not to without testing it first. Uscan can also verify detached OpenPGP signatures if upstream's signing key is known. [file, gpgv | gpgv2, gnupg | gnupg2, libfile-dirlist-perl, libfile-touch-perl, libfile-which-perl, liblwp-protocol-https-perl, libmoo-perl, libwww-perl, unzip, xz-utils]* - uupdate: Update the package with an archive or patches from an upstream author. This will be of help if you have to update your package. It will try to apply the latest diffs to your package and tell you how successful it was. [patch] - what-patch: determine what patch system, if any, a source package is using. [patchutils] - whodepends: check which maintainers' packages depend on a package. - who-permits-upload: Retrieve information about Debian Maintainer access control lists. [gnupg | gnupg2, libencode-locale-perl, libwww-perl, debian-keyring] - who-uploads: determine the most recent uploaders of a package to the Debian archive. [gnupg | gnupg2, debian-keyring, debian-maintainers, wget] - wnpp-alert: list installed packages which are orphaned or up for adoption. [wget | curl] - wnpp-check: check whether there is an open request for packaging or intention to package bug for a package. [wget | curl] - wrap-and-sort: wrap long lines and sort items in packaging files. [python3-debian] - /usr/share/doc/devscripts/examples: This directory contains examples of procmail and exim scripts for sorting mail arriving to Debian mailing lists.
PackageMaintainer	Devscripts Maintainers <devscripts@packages.debian.org>
PackageName	devscripts
PackageSection	devel
PackageVersion	2.21.7~bpo11+1
SHA-1	1C112F872A8C177A67E02521243632F158596992
SHA-256	04B4FD23FA22B30E3004F7295435734A0D180FCA70C90F02720628AF720AD98C