Parents (Total: 9)

The searched file hash is included in 9 parent files which include package known and seen by metalookup. A sample is included below:

Key	Value
FileSize	1093408
MD5	0FF6AB76A4CF8D954E2F2B3720AC35F3
PackageDescription	scripts to make the life of a Debian Package maintainer easier Contains the following scripts, dependencies/recommendations shown in brackets afterwards: . - annotate-output: run a command and prepend time and stream (O for stdout, E for stderr) for every line of output. - archpath: Prints arch (tla/Bazaar) package names. Also supports calculating the package names for other branches. [tla | bazaar] - bts: A command-line tool for accessing the Debian Bug Tracking System, both to send mails to control@bts.debian.org and to access the web pages and SOAP interface of the BTS. [www-browser, libauthen-sasl-perl, libnet-smtps-perl, libsoap-lite-perl, liburi-perl, libwww-perl, bsd-mailx | mailx] - build-rdeps: Searches for all packages that build-depend on a given package. [dctrl-tools, dose-extra, libdpkg-perl] - chdist: tool to easily play with several distributions. [dctrl-tools] - checkbashisms: check whether a /bin/sh script contains any common bash-specific constructs. - cowpoke: upload a Debian source package to a cowbuilder host and build it, optionally also signing and uploading the result to an incoming queue. [ssh-client] - cvs-debi, cvs-debc: wrappers around debi and debc respectively (see below) which allow them to be called from the CVS working directory. [cvs-buildpackage] - cvs-debrelease: wrapper around debrelease which allows it to be called from the CVS working directory. [cvs-buildpackage, dupload | dput, ssh-client] - cvs-debuild: A wrapper for cvs-buildpackage to use debuild as its package building program. [cvs-buildpackage, fakeroot, lintian, gnupg |gnupg2] - dcmd: run a given command replacing the name of a .changes or .dsc file with each of the files referenced therein. * - dd-list: given a list of packages, pretty-print it ordered by maintainer. * - debbisect: bisect snapshot.debian.org to find which change in the archive introduced a certain problem. [mmdebstrap, python3-debian] - debc: List contents of current package. Do this after a successful "debuild" to see if the package looks all right. - debchange (abbreviation dch): Modifies debian/changelog and manages version numbers for you. It will either increment the version number or add an entry for the current version, depending upon the options given to it. [libdistro-info-perl, libsoap-lite-perl]* - debcheckout: checkout the development repository of a Debian package. * - debclean: Clean a Debian source tree. Debclean will clean all Debian source trees below the current directory, and if requested, also remove all files that were generated from these source trees (that is .deb, .dsc and .changes files). It will keep the .diffs and original files, though, so that the binaries and other files can be rebuilt if necessary. [fakeroot]* - debcommit: Commits changes to cvs, darcs, svn, svk, tla, bzr, git, or hg, using new entries in debian/changelog as the commit message. Also supports tagging Debian package releases. [cvs | darcs | subversion | svk | tla | bzr | git-core | mercurial, libtimedate-perl] - debdiff: A program which examines two .deb files or two .changes files and reports on any difference found in their file lists. Useful for ensuring that no files were inadvertently lost between versions. Can also examine two .dsc files and report on the changes between source versions. For a deeper comparison one can use the diffoscope package. [wdiff, patchutils]* - debdiff-apply: Apply unified diffs of two Debian source packages, such as those generated by debdiff, to a target Debian source package. Any changes to debian/changelog are dealt with specially, to avoid the conflicts that changelog diffs typically produce when applied naively. May be used to check that old patches still apply to newer versions of those packages. [python3-debian, python3-unidiff, quilt] - debi: Installs the current package by using the setuid root debpkg script described below. It assumes that the current package has just been built (for example by debuild), and the .deb lives in the parent directory, and will effectively run dpkg -i on the .deb. The ability to install the package with a very short command is very useful when troubleshooting packages. - debpkg: A wrapper for dpkg used by debi to allow convenient testing of packages. For debpkg to work, it needs to be made setuid root, and this needs to be performed by the sysadmin -- it is not installed as setuid root by default. (Note that being able to run a setuid root debpkg is effectively the same as having root access to the system, so this should be done with caution.) Having debpkg as a wrapper for dpkg can be a Good Thing (TM), as it decreases the potential for damage by accidental wrong use of commands in superuser mode (e.g., an inadvertent rm -rf * in the wrong directory is disastrous as many can attest to). - debrelease: A wrapper around dupload or dput which figures out which version to upload, and then calls dupload or dput to actually perform the upload. [dupload | dput, ssh-client] - debrebuild: A script that provided a .buildinfo file reports the instructions on how to try to reproduce the reported build. [sbuild | mmdebstrap, libdistro-info-perl] - debrepro: A script that tests reproducibility of Debian packages. It will build a given source directory twice, with a set of variation between the first and second build, and compare the binary packages produced. If diffoscope is installed, it is used to compare non-matching binaries. If disorderfs is installed, it is used during the build to inject non-determinism in filesystem listing operations. [faketime, diffoscope, disorderfs] - debrsign: This transfers a .changes/.dsc pair to a remote machine for signing, and runs debsign on the remote machine over an SSH connection. [gnupg | gnupg2, debian-keyring, ssh-client] - debsign: Use GNU Privacy Guard to sign the changes (and possibly dsc) files created by running dpkg-buildpackage with no-sign options. Useful if you are building a package on a remote machine and wish to sign it on a local one. This script is capable of automatically downloading the .changes and .dsc files from a remote machine. [gnupg |gnupg2, debian-keyring, ssh-client]* - debsnap: grab packages from https://snapshot.debian.org [libwww-perl, libjson-perl] - debuild: A wrapper for building a package (i.e., dpkg-buildpackage) to avoid problems with insufficient permissions and wrong paths etc. Debuild will set up the proper environment for building a package. Debuild will use the fakeroot program to build the package by default, but can be instructed to use any other gain-root command, or can even be installed setuid root. Debuild can also be used to run various of the debian/rules operations with the same root-gaining procedure. Debuild will also run lintian to check that the package does not have any major policy violations. [fakeroot, lintian, gnupg | gnupg2]* - deb-reversion: increases a binary package version number and repacks the package, useful for porters and the like. - deb-why-removed: shows the reason a package was removed from the archive. [libdpkg-perl] - dep3changelog: generate a changelog entry from a DEP3-style patch header. - desktop2menu: given a freedesktop.org desktop file, generate a skeleton for a menu file. [libfile-desktopentry-perl] - dget: Downloads Debian source and binary packages. Point at a .changes or .dsc to download all references files. Specify a package name to download it from the configured apt repository. [wget | curl] - diff2patches: extracts patches from a .diff.gz file placing them under debian/ or, if present, debian/patches. [patchutils] - dpkg-depcheck, dpkg-genbuilddeps: Runs a specified command (such as debian/rules build) or dpkg-buildpackage, respectively, to determine the packages used during the build process. This information can be helpful when trying to determine the packages needed in the Build-Depends etc. lines in the debian/control file. [build-essential, strace] - dscextract: extract a single file from a Debian source package. [patchutils] - dscverify: check the signature and MD5 sums of a dsc file against the most current Debian keyring on your system. [gnupg | gnupg2, debian-keyring] - edit-patch: add/edit a patch for a source package and commit the changes. [quilt | dpatch | cdbs] - getbuildlog: download package build logs from Debian auto-builders. [wget] - git-deborig: try to produce Debian orig.tar using git-archive(1). [libdpkg-perl, libgit-wrapper-perl, liblist-compare-perl, libstring-shellquote-perl, libtry-tiny-perl] - grep-excuses: grep britney's excuses to find out what is happening to your packages. [libdbd-pg-perl, libterm-size-perl, libyaml-syck-perl, wget, w3m] - hardening-check: report the hardening characteristics of a set of binaries. - list-unreleased: searches for packages marked UNRELEASED in their changelog. - ltnu (Long Time No Upload): List all uploads of packages by the given uploader or maintainer and display them ordered by the last upload of that package, oldest uploads first. - manpage-alert: locate binaries without corresponding manpages. [man-db] - mass-bug: mass-file bug reports. [bsd-mailx | mailx] - mergechanges: merge .changes files from the same release but built on different architectures. - mk-build-deps: Given a package name and/or control file, generate a binary package which may be installed to satisfy the build-dependencies of the given package. [equivs] - mk-origtargz: Rename upstream tarball, optionally changing the compression and removing unwanted files. [libfile-which-perl, unzip, xz-utils, file] - namecheck: Check project names are not already taken. - nmudiff: prepare a diff of this version (presumably an NMU against the previously released version (as per the changelog) and submit the diff to the BTS. [patchutils, mutt] - origtargz: fetch the orig tarball of a Debian package from various sources, and unpack it. [pristine-tar] - plotchangelog: display information from a changelog graphically using gnuplot. [libtimedate-perl, gnuplot] - pts-subscribe: subscribe to the PTS (Package Tracking System) for a limited period of time. [bsd-mailx | mailx, at] - rc-alert: list installed packages which have release-critical bugs. [wget | curl] - reproducible-check: reports on the reproducible status of installed packages. For more details please see <https://reproducible-builds.org>. - rmadison: remotely query the Debian archive database about packages. [liburi-perl, wget | curl] - sadt: run DEP-8 tests. [python3-debian] - salsa: manipulates salsa.debian.org repositories and users [libgitlab-api-v4-perl] - suspicious-source: output a list of files which are not common source files. [python3-magic] - svnpath: Prints the path to the Subversion repository of a Subversion checkout. Also supports calculating the paths for branches and tags in a repository independent fashion. Used by debcommit to generate svn tags. [subversion] - tagpending: runs from a Debian source tree and tags bugs that are to be closed in the latest changelog as pending. [libsoap-lite-perl] - transition-check: Check a list of source packages for involvement in transitions for which uploads to unstable are currently blocked. [libwww-perl, libyaml-syck-perl] - uscan: Automatically scan for and download upstream updates. Uscan can also call a program such as uupdate to attempt to update the Debianised version based on the new update. Whilst uscan could be used to release the updated version automatically, it is probably better not to without testing it first. Uscan can also verify detached OpenPGP signatures if upstream's signing key is known. [file, gpgv | gpgv2, gnupg | gnupg2, libfile-dirlist-perl, libfile-touch-perl, libfile-which-perl, liblwp-protocol-https-perl, libmoo-perl, libwww-perl, unzip, xz-utils]* - uupdate: Update the package with an archive or patches from an upstream author. This will be of help if you have to update your package. It will try to apply the latest diffs to your package and tell you how successful it was. [patch] - what-patch: determine what patch system, if any, a source package is using. [patchutils] - whodepends: check which maintainers' packages depend on a package. - who-permits-upload: Retrieve information about Debian Maintainer access control lists. [gnupg | gnupg2, libencode-locale-perl, libwww-perl, debian-keyring] - who-uploads: determine the most recent uploaders of a package to the Debian archive. [gnupg | gnupg2, debian-keyring, debian-maintainers, wget] - wnpp-alert: list installed packages which are orphaned or up for adoption. [wget | curl] - wnpp-check: check whether there is an open request for packaging or intention to package bug for a package. [wget | curl] - wrap-and-sort: wrap long lines and sort items in packaging files. [python3-debian] - /usr/share/doc/devscripts/examples: This directory contains examples of procmail and exim scripts for sorting mail arriving to Debian mailing lists.
PackageMaintainer	Devscripts Maintainers <devscripts@packages.debian.org>
PackageName	devscripts
PackageSection	devel
PackageVersion	2.21.4
SHA-1	5F2F8C1EFEC66365C53C07F337FB35CF2922CC35
SHA-256	39C2FAE82B30FD911F404F6ED278AFCCA5D6E4A874E15523D7B4BE5DD693CD38

Key	Value
FileSize	1093804
MD5	1CC73BB31D327C7FDFE460D7BC5FE8ED
PackageDescription	scripts to make the life of a Debian Package maintainer easier Contains the following scripts, dependencies/recommendations shown in brackets afterwards: . - annotate-output: run a command and prepend time and stream (O for stdout, E for stderr) for every line of output. - archpath: Prints arch (tla/Bazaar) package names. Also supports calculating the package names for other branches. [tla | bazaar] - bts: A command-line tool for accessing the Debian Bug Tracking System, both to send mails to control@bts.debian.org and to access the web pages and SOAP interface of the BTS. [www-browser, libauthen-sasl-perl, libnet-smtps-perl, libsoap-lite-perl, liburi-perl, libwww-perl, bsd-mailx | mailx] - build-rdeps: Searches for all packages that build-depend on a given package. [dctrl-tools, dose-extra, libdpkg-perl] - chdist: tool to easily play with several distributions. [dctrl-tools] - checkbashisms: check whether a /bin/sh script contains any common bash-specific constructs. - cowpoke: upload a Debian source package to a cowbuilder host and build it, optionally also signing and uploading the result to an incoming queue. [ssh-client] - cvs-debi, cvs-debc: wrappers around debi and debc respectively (see below) which allow them to be called from the CVS working directory. [cvs-buildpackage] - cvs-debrelease: wrapper around debrelease which allows it to be called from the CVS working directory. [cvs-buildpackage, dupload | dput, ssh-client] - cvs-debuild: A wrapper for cvs-buildpackage to use debuild as its package building program. [cvs-buildpackage, fakeroot, lintian, gnupg |gnupg2] - dcmd: run a given command replacing the name of a .changes or .dsc file with each of the files referenced therein. * - dd-list: given a list of packages, pretty-print it ordered by maintainer. * - debbisect: bisect snapshot.debian.org to find which change in the archive introduced a certain problem. [mmdebstrap, python3-debian] - debc: List contents of current package. Do this after a successful "debuild" to see if the package looks all right. - debchange (abbreviation dch): Modifies debian/changelog and manages version numbers for you. It will either increment the version number or add an entry for the current version, depending upon the options given to it. [libdistro-info-perl, libsoap-lite-perl]* - debcheckout: checkout the development repository of a Debian package. * - debclean: Clean a Debian source tree. Debclean will clean all Debian source trees below the current directory, and if requested, also remove all files that were generated from these source trees (that is .deb, .dsc and .changes files). It will keep the .diffs and original files, though, so that the binaries and other files can be rebuilt if necessary. [fakeroot]* - debcommit: Commits changes to cvs, darcs, svn, svk, tla, bzr, git, or hg, using new entries in debian/changelog as the commit message. Also supports tagging Debian package releases. [cvs | darcs | subversion | svk | tla | bzr | git-core | mercurial, libtimedate-perl] - debdiff: A program which examines two .deb files or two .changes files and reports on any difference found in their file lists. Useful for ensuring that no files were inadvertently lost between versions. Can also examine two .dsc files and report on the changes between source versions. For a deeper comparison one can use the diffoscope package. [wdiff, patchutils]* - debdiff-apply: Apply unified diffs of two Debian source packages, such as those generated by debdiff, to a target Debian source package. Any changes to debian/changelog are dealt with specially, to avoid the conflicts that changelog diffs typically produce when applied naively. May be used to check that old patches still apply to newer versions of those packages. [python3-debian, python3-unidiff, quilt] - debi: Installs the current package by using the setuid root debpkg script described below. It assumes that the current package has just been built (for example by debuild), and the .deb lives in the parent directory, and will effectively run dpkg -i on the .deb. The ability to install the package with a very short command is very useful when troubleshooting packages. - debpkg: A wrapper for dpkg used by debi to allow convenient testing of packages. For debpkg to work, it needs to be made setuid root, and this needs to be performed by the sysadmin -- it is not installed as setuid root by default. (Note that being able to run a setuid root debpkg is effectively the same as having root access to the system, so this should be done with caution.) Having debpkg as a wrapper for dpkg can be a Good Thing (TM), as it decreases the potential for damage by accidental wrong use of commands in superuser mode (e.g., an inadvertent rm -rf * in the wrong directory is disastrous as many can attest to). - debrelease: A wrapper around dupload or dput which figures out which version to upload, and then calls dupload or dput to actually perform the upload. [dupload | dput, ssh-client] - debrebuild: A script that provided a .buildinfo file reports the instructions on how to try to reproduce the reported build. [sbuild | mmdebstrap, libdistro-info-perl] - debrepro: A script that tests reproducibility of Debian packages. It will build a given source directory twice, with a set of variation between the first and second build, and compare the binary packages produced. If diffoscope is installed, it is used to compare non-matching binaries. If disorderfs is installed, it is used during the build to inject non-determinism in filesystem listing operations. [faketime, diffoscope, disorderfs] - debrsign: This transfers a .changes/.dsc pair to a remote machine for signing, and runs debsign on the remote machine over an SSH connection. [gnupg | gnupg2, debian-keyring, ssh-client] - debsign: Use GNU Privacy Guard to sign the changes (and possibly dsc) files created by running dpkg-buildpackage with no-sign options. Useful if you are building a package on a remote machine and wish to sign it on a local one. This script is capable of automatically downloading the .changes and .dsc files from a remote machine. [gnupg |gnupg2, debian-keyring, ssh-client]* - debsnap: grab packages from https://snapshot.debian.org [libwww-perl, libjson-perl] - debuild: A wrapper for building a package (i.e., dpkg-buildpackage) to avoid problems with insufficient permissions and wrong paths etc. Debuild will set up the proper environment for building a package. Debuild will use the fakeroot program to build the package by default, but can be instructed to use any other gain-root command, or can even be installed setuid root. Debuild can also be used to run various of the debian/rules operations with the same root-gaining procedure. Debuild will also run lintian to check that the package does not have any major policy violations. [fakeroot, lintian, gnupg | gnupg2]* - deb-reversion: increases a binary package version number and repacks the package, useful for porters and the like. - deb-why-removed: shows the reason a package was removed from the archive. [libdpkg-perl] - dep3changelog: generate a changelog entry from a DEP3-style patch header. - desktop2menu: given a freedesktop.org desktop file, generate a skeleton for a menu file. [libfile-desktopentry-perl] - dget: Downloads Debian source and binary packages. Point at a .changes or .dsc to download all references files. Specify a package name to download it from the configured apt repository. [wget | curl] - diff2patches: extracts patches from a .diff.gz file placing them under debian/ or, if present, debian/patches. [patchutils] - dpkg-depcheck, dpkg-genbuilddeps: Runs a specified command (such as debian/rules build) or dpkg-buildpackage, respectively, to determine the packages used during the build process. This information can be helpful when trying to determine the packages needed in the Build-Depends etc. lines in the debian/control file. [build-essential, strace] - dscextract: extract a single file from a Debian source package. [patchutils] - dscverify: check the signature and MD5 sums of a dsc file against the most current Debian keyring on your system. [gnupg | gnupg2, debian-keyring] - edit-patch: add/edit a patch for a source package and commit the changes. [quilt | dpatch | cdbs] - getbuildlog: download package build logs from Debian auto-builders. [wget] - git-deborig: try to produce Debian orig.tar using git-archive(1). [libdpkg-perl, libgit-wrapper-perl, liblist-compare-perl, libstring-shellquote-perl, libtry-tiny-perl] - grep-excuses: grep britney's excuses to find out what is happening to your packages. [libdbd-pg-perl, libterm-size-perl, libyaml-syck-perl, wget, w3m] - hardening-check: report the hardening characteristics of a set of binaries. - list-unreleased: searches for packages marked UNRELEASED in their changelog. - ltnu (Long Time No Upload): List all uploads of packages by the given uploader or maintainer and display them ordered by the last upload of that package, oldest uploads first. - manpage-alert: locate binaries without corresponding manpages. [man-db] - mass-bug: mass-file bug reports. [bsd-mailx | mailx] - mergechanges: merge .changes files from the same release but built on different architectures. - mk-build-deps: Given a package name and/or control file, generate a binary package which may be installed to satisfy the build-dependencies of the given package. [equivs] - mk-origtargz: Rename upstream tarball, optionally changing the compression and removing unwanted files. [libfile-which-perl, unzip, xz-utils, file] - namecheck: Check project names are not already taken. - nmudiff: prepare a diff of this version (presumably an NMU against the previously released version (as per the changelog) and submit the diff to the BTS. [patchutils, mutt] - origtargz: fetch the orig tarball of a Debian package from various sources, and unpack it. [pristine-tar] - plotchangelog: display information from a changelog graphically using gnuplot. [libtimedate-perl, gnuplot] - pts-subscribe: subscribe to the PTS (Package Tracking System) for a limited period of time. [bsd-mailx | mailx, at] - rc-alert: list installed packages which have release-critical bugs. [wget | curl] - reproducible-check: reports on the reproducible status of installed packages. For more details please see <https://reproducible-builds.org>. - rmadison: remotely query the Debian archive database about packages. [liburi-perl, wget | curl] - sadt: run DEP-8 tests. [python3-debian] - salsa: manipulates salsa.debian.org repositories and users [libgitlab-api-v4-perl] - suspicious-source: output a list of files which are not common source files. [python3-magic] - svnpath: Prints the path to the Subversion repository of a Subversion checkout. Also supports calculating the paths for branches and tags in a repository independent fashion. Used by debcommit to generate svn tags. [subversion] - tagpending: runs from a Debian source tree and tags bugs that are to be closed in the latest changelog as pending. [libsoap-lite-perl] - transition-check: Check a list of source packages for involvement in transitions for which uploads to unstable are currently blocked. [libwww-perl, libyaml-syck-perl] - uscan: Automatically scan for and download upstream updates. Uscan can also call a program such as uupdate to attempt to update the Debianised version based on the new update. Whilst uscan could be used to release the updated version automatically, it is probably better not to without testing it first. Uscan can also verify detached OpenPGP signatures if upstream's signing key is known. [file, gpgv | gpgv2, gnupg | gnupg2, libfile-dirlist-perl, libfile-touch-perl, libfile-which-perl, liblwp-protocol-https-perl, libmoo-perl, libwww-perl, unzip, xz-utils]* - uupdate: Update the package with an archive or patches from an upstream author. This will be of help if you have to update your package. It will try to apply the latest diffs to your package and tell you how successful it was. [patch] - what-patch: determine what patch system, if any, a source package is using. [patchutils] - whodepends: check which maintainers' packages depend on a package. - who-permits-upload: Retrieve information about Debian Maintainer access control lists. [gnupg | gnupg2, libencode-locale-perl, libwww-perl, debian-keyring] - who-uploads: determine the most recent uploaders of a package to the Debian archive. [gnupg | gnupg2, debian-keyring, debian-maintainers, wget] - wnpp-alert: list installed packages which are orphaned or up for adoption. [wget | curl] - wnpp-check: check whether there is an open request for packaging or intention to package bug for a package. [wget | curl] - wrap-and-sort: wrap long lines and sort items in packaging files. [python3-debian] - /usr/share/doc/devscripts/examples: This directory contains examples of procmail and exim scripts for sorting mail arriving to Debian mailing lists.
PackageMaintainer	Devscripts Maintainers <devscripts@packages.debian.org>
PackageName	devscripts
PackageSection	devel
PackageVersion	2.21.4
SHA-1	4BC698502E6D518A60CCF27C453D85870C5D2386
SHA-256	02F3526E44387B8D0734453501969AAF5A46382CB50FB78415621291BB846E0A

Key	Value
FileSize	1093492
MD5	BD67768427044B9672479E7195D04D2D
PackageDescription	scripts to make the life of a Debian Package maintainer easier Contains the following scripts, dependencies/recommendations shown in brackets afterwards: . - annotate-output: run a command and prepend time and stream (O for stdout, E for stderr) for every line of output. - archpath: Prints arch (tla/Bazaar) package names. Also supports calculating the package names for other branches. [tla | bazaar] - bts: A command-line tool for accessing the Debian Bug Tracking System, both to send mails to control@bts.debian.org and to access the web pages and SOAP interface of the BTS. [www-browser, libauthen-sasl-perl, libnet-smtps-perl, libsoap-lite-perl, liburi-perl, libwww-perl, bsd-mailx | mailx] - build-rdeps: Searches for all packages that build-depend on a given package. [dctrl-tools, dose-extra, libdpkg-perl] - chdist: tool to easily play with several distributions. [dctrl-tools] - checkbashisms: check whether a /bin/sh script contains any common bash-specific constructs. - cowpoke: upload a Debian source package to a cowbuilder host and build it, optionally also signing and uploading the result to an incoming queue. [ssh-client] - cvs-debi, cvs-debc: wrappers around debi and debc respectively (see below) which allow them to be called from the CVS working directory. [cvs-buildpackage] - cvs-debrelease: wrapper around debrelease which allows it to be called from the CVS working directory. [cvs-buildpackage, dupload | dput, ssh-client] - cvs-debuild: A wrapper for cvs-buildpackage to use debuild as its package building program. [cvs-buildpackage, fakeroot, lintian, gnupg |gnupg2] - dcmd: run a given command replacing the name of a .changes or .dsc file with each of the files referenced therein. * - dd-list: given a list of packages, pretty-print it ordered by maintainer. * - debbisect: bisect snapshot.debian.org to find which change in the archive introduced a certain problem. [mmdebstrap, python3-debian] - debc: List contents of current package. Do this after a successful "debuild" to see if the package looks all right. - debchange (abbreviation dch): Modifies debian/changelog and manages version numbers for you. It will either increment the version number or add an entry for the current version, depending upon the options given to it. [libdistro-info-perl, libsoap-lite-perl]* - debcheckout: checkout the development repository of a Debian package. * - debclean: Clean a Debian source tree. Debclean will clean all Debian source trees below the current directory, and if requested, also remove all files that were generated from these source trees (that is .deb, .dsc and .changes files). It will keep the .diffs and original files, though, so that the binaries and other files can be rebuilt if necessary. [fakeroot]* - debcommit: Commits changes to cvs, darcs, svn, svk, tla, bzr, git, or hg, using new entries in debian/changelog as the commit message. Also supports tagging Debian package releases. [cvs | darcs | subversion | svk | tla | bzr | git-core | mercurial, libtimedate-perl] - debdiff: A program which examines two .deb files or two .changes files and reports on any difference found in their file lists. Useful for ensuring that no files were inadvertently lost between versions. Can also examine two .dsc files and report on the changes between source versions. For a deeper comparison one can use the diffoscope package. [wdiff, patchutils]* - debdiff-apply: Apply unified diffs of two Debian source packages, such as those generated by debdiff, to a target Debian source package. Any changes to debian/changelog are dealt with specially, to avoid the conflicts that changelog diffs typically produce when applied naively. May be used to check that old patches still apply to newer versions of those packages. [python3-debian, python3-unidiff, quilt] - debi: Installs the current package by using the setuid root debpkg script described below. It assumes that the current package has just been built (for example by debuild), and the .deb lives in the parent directory, and will effectively run dpkg -i on the .deb. The ability to install the package with a very short command is very useful when troubleshooting packages. - debpkg: A wrapper for dpkg used by debi to allow convenient testing of packages. For debpkg to work, it needs to be made setuid root, and this needs to be performed by the sysadmin -- it is not installed as setuid root by default. (Note that being able to run a setuid root debpkg is effectively the same as having root access to the system, so this should be done with caution.) Having debpkg as a wrapper for dpkg can be a Good Thing (TM), as it decreases the potential for damage by accidental wrong use of commands in superuser mode (e.g., an inadvertent rm -rf * in the wrong directory is disastrous as many can attest to). - debrelease: A wrapper around dupload or dput which figures out which version to upload, and then calls dupload or dput to actually perform the upload. [dupload | dput, ssh-client] - debrebuild: A script that provided a .buildinfo file reports the instructions on how to try to reproduce the reported build. [sbuild | mmdebstrap, libdistro-info-perl] - debrepro: A script that tests reproducibility of Debian packages. It will build a given source directory twice, with a set of variation between the first and second build, and compare the binary packages produced. If diffoscope is installed, it is used to compare non-matching binaries. If disorderfs is installed, it is used during the build to inject non-determinism in filesystem listing operations. [faketime, diffoscope, disorderfs] - debrsign: This transfers a .changes/.dsc pair to a remote machine for signing, and runs debsign on the remote machine over an SSH connection. [gnupg | gnupg2, debian-keyring, ssh-client] - debsign: Use GNU Privacy Guard to sign the changes (and possibly dsc) files created by running dpkg-buildpackage with no-sign options. Useful if you are building a package on a remote machine and wish to sign it on a local one. This script is capable of automatically downloading the .changes and .dsc files from a remote machine. [gnupg |gnupg2, debian-keyring, ssh-client]* - debsnap: grab packages from https://snapshot.debian.org [libwww-perl, libjson-perl] - debuild: A wrapper for building a package (i.e., dpkg-buildpackage) to avoid problems with insufficient permissions and wrong paths etc. Debuild will set up the proper environment for building a package. Debuild will use the fakeroot program to build the package by default, but can be instructed to use any other gain-root command, or can even be installed setuid root. Debuild can also be used to run various of the debian/rules operations with the same root-gaining procedure. Debuild will also run lintian to check that the package does not have any major policy violations. [fakeroot, lintian, gnupg | gnupg2]* - deb-reversion: increases a binary package version number and repacks the package, useful for porters and the like. - deb-why-removed: shows the reason a package was removed from the archive. [libdpkg-perl] - dep3changelog: generate a changelog entry from a DEP3-style patch header. - desktop2menu: given a freedesktop.org desktop file, generate a skeleton for a menu file. [libfile-desktopentry-perl] - dget: Downloads Debian source and binary packages. Point at a .changes or .dsc to download all references files. Specify a package name to download it from the configured apt repository. [wget | curl] - diff2patches: extracts patches from a .diff.gz file placing them under debian/ or, if present, debian/patches. [patchutils] - dpkg-depcheck, dpkg-genbuilddeps: Runs a specified command (such as debian/rules build) or dpkg-buildpackage, respectively, to determine the packages used during the build process. This information can be helpful when trying to determine the packages needed in the Build-Depends etc. lines in the debian/control file. [build-essential, strace] - dscextract: extract a single file from a Debian source package. [patchutils] - dscverify: check the signature and MD5 sums of a dsc file against the most current Debian keyring on your system. [gnupg | gnupg2, debian-keyring] - edit-patch: add/edit a patch for a source package and commit the changes. [quilt | dpatch | cdbs] - getbuildlog: download package build logs from Debian auto-builders. [wget] - git-deborig: try to produce Debian orig.tar using git-archive(1). [libdpkg-perl, libgit-wrapper-perl, liblist-compare-perl, libstring-shellquote-perl, libtry-tiny-perl] - grep-excuses: grep britney's excuses to find out what is happening to your packages. [libdbd-pg-perl, libterm-size-perl, libyaml-syck-perl, wget, w3m] - hardening-check: report the hardening characteristics of a set of binaries. - list-unreleased: searches for packages marked UNRELEASED in their changelog. - ltnu (Long Time No Upload): List all uploads of packages by the given uploader or maintainer and display them ordered by the last upload of that package, oldest uploads first. - manpage-alert: locate binaries without corresponding manpages. [man-db] - mass-bug: mass-file bug reports. [bsd-mailx | mailx] - mergechanges: merge .changes files from the same release but built on different architectures. - mk-build-deps: Given a package name and/or control file, generate a binary package which may be installed to satisfy the build-dependencies of the given package. [equivs] - mk-origtargz: Rename upstream tarball, optionally changing the compression and removing unwanted files. [libfile-which-perl, unzip, xz-utils, file] - namecheck: Check project names are not already taken. - nmudiff: prepare a diff of this version (presumably an NMU against the previously released version (as per the changelog) and submit the diff to the BTS. [patchutils, mutt] - origtargz: fetch the orig tarball of a Debian package from various sources, and unpack it. [pristine-tar] - plotchangelog: display information from a changelog graphically using gnuplot. [libtimedate-perl, gnuplot] - pts-subscribe: subscribe to the PTS (Package Tracking System) for a limited period of time. [bsd-mailx | mailx, at] - rc-alert: list installed packages which have release-critical bugs. [wget | curl] - reproducible-check: reports on the reproducible status of installed packages. For more details please see <https://reproducible-builds.org>. - rmadison: remotely query the Debian archive database about packages. [liburi-perl, wget | curl] - sadt: run DEP-8 tests. [python3-debian] - salsa: manipulates salsa.debian.org repositories and users [libgitlab-api-v4-perl] - suspicious-source: output a list of files which are not common source files. [python3-magic] - svnpath: Prints the path to the Subversion repository of a Subversion checkout. Also supports calculating the paths for branches and tags in a repository independent fashion. Used by debcommit to generate svn tags. [subversion] - tagpending: runs from a Debian source tree and tags bugs that are to be closed in the latest changelog as pending. [libsoap-lite-perl] - transition-check: Check a list of source packages for involvement in transitions for which uploads to unstable are currently blocked. [libwww-perl, libyaml-syck-perl] - uscan: Automatically scan for and download upstream updates. Uscan can also call a program such as uupdate to attempt to update the Debianised version based on the new update. Whilst uscan could be used to release the updated version automatically, it is probably better not to without testing it first. Uscan can also verify detached OpenPGP signatures if upstream's signing key is known. [file, gpgv | gpgv2, gnupg | gnupg2, libfile-dirlist-perl, libfile-touch-perl, libfile-which-perl, liblwp-protocol-https-perl, libmoo-perl, libwww-perl, unzip, xz-utils]* - uupdate: Update the package with an archive or patches from an upstream author. This will be of help if you have to update your package. It will try to apply the latest diffs to your package and tell you how successful it was. [patch] - what-patch: determine what patch system, if any, a source package is using. [patchutils] - whodepends: check which maintainers' packages depend on a package. - who-permits-upload: Retrieve information about Debian Maintainer access control lists. [gnupg | gnupg2, libencode-locale-perl, libwww-perl, debian-keyring] - who-uploads: determine the most recent uploaders of a package to the Debian archive. [gnupg | gnupg2, debian-keyring, debian-maintainers, wget] - wnpp-alert: list installed packages which are orphaned or up for adoption. [wget | curl] - wnpp-check: check whether there is an open request for packaging or intention to package bug for a package. [wget | curl] - wrap-and-sort: wrap long lines and sort items in packaging files. [python3-debian] - /usr/share/doc/devscripts/examples: This directory contains examples of procmail and exim scripts for sorting mail arriving to Debian mailing lists.
PackageMaintainer	Devscripts Maintainers <devscripts@packages.debian.org>
PackageName	devscripts
PackageSection	devel
PackageVersion	2.21.4
SHA-1	4A4B3AB08F237ECE64C511A2475F14980547517A
SHA-256	29C9E15DB26623E223E5A9496061FF8875E050B83DC6C1A849C1FF7937F0C83F

Key	Value
FileSize	1093224
MD5	2669AE60A859DD0D55F99E300992CD10
PackageDescription	scripts to make the life of a Debian Package maintainer easier Contains the following scripts, dependencies/recommendations shown in brackets afterwards: . - annotate-output: run a command and prepend time and stream (O for stdout, E for stderr) for every line of output. - archpath: Prints arch (tla/Bazaar) package names. Also supports calculating the package names for other branches. [tla | bazaar] - bts: A command-line tool for accessing the Debian Bug Tracking System, both to send mails to control@bts.debian.org and to access the web pages and SOAP interface of the BTS. [www-browser, libauthen-sasl-perl, libnet-smtps-perl, libsoap-lite-perl, liburi-perl, libwww-perl, bsd-mailx | mailx] - build-rdeps: Searches for all packages that build-depend on a given package. [dctrl-tools, dose-extra, libdpkg-perl] - chdist: tool to easily play with several distributions. [dctrl-tools] - checkbashisms: check whether a /bin/sh script contains any common bash-specific constructs. - cowpoke: upload a Debian source package to a cowbuilder host and build it, optionally also signing and uploading the result to an incoming queue. [ssh-client] - cvs-debi, cvs-debc: wrappers around debi and debc respectively (see below) which allow them to be called from the CVS working directory. [cvs-buildpackage] - cvs-debrelease: wrapper around debrelease which allows it to be called from the CVS working directory. [cvs-buildpackage, dupload | dput, ssh-client] - cvs-debuild: A wrapper for cvs-buildpackage to use debuild as its package building program. [cvs-buildpackage, fakeroot, lintian, gnupg |gnupg2] - dcmd: run a given command replacing the name of a .changes or .dsc file with each of the files referenced therein. * - dd-list: given a list of packages, pretty-print it ordered by maintainer. * - debbisect: bisect snapshot.debian.org to find which change in the archive introduced a certain problem. [mmdebstrap, python3-debian] - debc: List contents of current package. Do this after a successful "debuild" to see if the package looks all right. - debchange (abbreviation dch): Modifies debian/changelog and manages version numbers for you. It will either increment the version number or add an entry for the current version, depending upon the options given to it. [libdistro-info-perl, libsoap-lite-perl]* - debcheckout: checkout the development repository of a Debian package. * - debclean: Clean a Debian source tree. Debclean will clean all Debian source trees below the current directory, and if requested, also remove all files that were generated from these source trees (that is .deb, .dsc and .changes files). It will keep the .diffs and original files, though, so that the binaries and other files can be rebuilt if necessary. [fakeroot]* - debcommit: Commits changes to cvs, darcs, svn, svk, tla, bzr, git, or hg, using new entries in debian/changelog as the commit message. Also supports tagging Debian package releases. [cvs | darcs | subversion | svk | tla | bzr | git-core | mercurial, libtimedate-perl] - debdiff: A program which examines two .deb files or two .changes files and reports on any difference found in their file lists. Useful for ensuring that no files were inadvertently lost between versions. Can also examine two .dsc files and report on the changes between source versions. For a deeper comparison one can use the diffoscope package. [wdiff, patchutils]* - debdiff-apply: Apply unified diffs of two Debian source packages, such as those generated by debdiff, to a target Debian source package. Any changes to debian/changelog are dealt with specially, to avoid the conflicts that changelog diffs typically produce when applied naively. May be used to check that old patches still apply to newer versions of those packages. [python3-debian, python3-unidiff, quilt] - debi: Installs the current package by using the setuid root debpkg script described below. It assumes that the current package has just been built (for example by debuild), and the .deb lives in the parent directory, and will effectively run dpkg -i on the .deb. The ability to install the package with a very short command is very useful when troubleshooting packages. - debpkg: A wrapper for dpkg used by debi to allow convenient testing of packages. For debpkg to work, it needs to be made setuid root, and this needs to be performed by the sysadmin -- it is not installed as setuid root by default. (Note that being able to run a setuid root debpkg is effectively the same as having root access to the system, so this should be done with caution.) Having debpkg as a wrapper for dpkg can be a Good Thing (TM), as it decreases the potential for damage by accidental wrong use of commands in superuser mode (e.g., an inadvertent rm -rf * in the wrong directory is disastrous as many can attest to). - debrelease: A wrapper around dupload or dput which figures out which version to upload, and then calls dupload or dput to actually perform the upload. [dupload | dput, ssh-client] - debrebuild: A script that provided a .buildinfo file reports the instructions on how to try to reproduce the reported build. [sbuild | mmdebstrap, libdistro-info-perl] - debrepro: A script that tests reproducibility of Debian packages. It will build a given source directory twice, with a set of variation between the first and second build, and compare the binary packages produced. If diffoscope is installed, it is used to compare non-matching binaries. If disorderfs is installed, it is used during the build to inject non-determinism in filesystem listing operations. [faketime, diffoscope, disorderfs] - debrsign: This transfers a .changes/.dsc pair to a remote machine for signing, and runs debsign on the remote machine over an SSH connection. [gnupg | gnupg2, debian-keyring, ssh-client] - debsign: Use GNU Privacy Guard to sign the changes (and possibly dsc) files created by running dpkg-buildpackage with no-sign options. Useful if you are building a package on a remote machine and wish to sign it on a local one. This script is capable of automatically downloading the .changes and .dsc files from a remote machine. [gnupg |gnupg2, debian-keyring, ssh-client]* - debsnap: grab packages from https://snapshot.debian.org [libwww-perl, libjson-perl] - debuild: A wrapper for building a package (i.e., dpkg-buildpackage) to avoid problems with insufficient permissions and wrong paths etc. Debuild will set up the proper environment for building a package. Debuild will use the fakeroot program to build the package by default, but can be instructed to use any other gain-root command, or can even be installed setuid root. Debuild can also be used to run various of the debian/rules operations with the same root-gaining procedure. Debuild will also run lintian to check that the package does not have any major policy violations. [fakeroot, lintian, gnupg | gnupg2]* - deb-reversion: increases a binary package version number and repacks the package, useful for porters and the like. - deb-why-removed: shows the reason a package was removed from the archive. [libdpkg-perl] - dep3changelog: generate a changelog entry from a DEP3-style patch header. - desktop2menu: given a freedesktop.org desktop file, generate a skeleton for a menu file. [libfile-desktopentry-perl] - dget: Downloads Debian source and binary packages. Point at a .changes or .dsc to download all references files. Specify a package name to download it from the configured apt repository. [wget | curl] - diff2patches: extracts patches from a .diff.gz file placing them under debian/ or, if present, debian/patches. [patchutils] - dpkg-depcheck, dpkg-genbuilddeps: Runs a specified command (such as debian/rules build) or dpkg-buildpackage, respectively, to determine the packages used during the build process. This information can be helpful when trying to determine the packages needed in the Build-Depends etc. lines in the debian/control file. [build-essential, strace] - dscextract: extract a single file from a Debian source package. [patchutils] - dscverify: check the signature and MD5 sums of a dsc file against the most current Debian keyring on your system. [gnupg | gnupg2, debian-keyring] - edit-patch: add/edit a patch for a source package and commit the changes. [quilt | dpatch | cdbs] - getbuildlog: download package build logs from Debian auto-builders. [wget] - git-deborig: try to produce Debian orig.tar using git-archive(1). [libdpkg-perl, libgit-wrapper-perl, liblist-compare-perl, libstring-shellquote-perl, libtry-tiny-perl] - grep-excuses: grep britney's excuses to find out what is happening to your packages. [libdbd-pg-perl, libterm-size-perl, libyaml-syck-perl, wget, w3m] - hardening-check: report the hardening characteristics of a set of binaries. - list-unreleased: searches for packages marked UNRELEASED in their changelog. - ltnu (Long Time No Upload): List all uploads of packages by the given uploader or maintainer and display them ordered by the last upload of that package, oldest uploads first. - manpage-alert: locate binaries without corresponding manpages. [man-db] - mass-bug: mass-file bug reports. [bsd-mailx | mailx] - mergechanges: merge .changes files from the same release but built on different architectures. - mk-build-deps: Given a package name and/or control file, generate a binary package which may be installed to satisfy the build-dependencies of the given package. [equivs] - mk-origtargz: Rename upstream tarball, optionally changing the compression and removing unwanted files. [libfile-which-perl, unzip, xz-utils, file] - namecheck: Check project names are not already taken. - nmudiff: prepare a diff of this version (presumably an NMU against the previously released version (as per the changelog) and submit the diff to the BTS. [patchutils, mutt] - origtargz: fetch the orig tarball of a Debian package from various sources, and unpack it. [pristine-tar] - plotchangelog: display information from a changelog graphically using gnuplot. [libtimedate-perl, gnuplot] - pts-subscribe: subscribe to the PTS (Package Tracking System) for a limited period of time. [bsd-mailx | mailx, at] - rc-alert: list installed packages which have release-critical bugs. [wget | curl] - reproducible-check: reports on the reproducible status of installed packages. For more details please see <https://reproducible-builds.org>. - rmadison: remotely query the Debian archive database about packages. [liburi-perl, wget | curl] - sadt: run DEP-8 tests. [python3-debian] - salsa: manipulates salsa.debian.org repositories and users [libgitlab-api-v4-perl] - suspicious-source: output a list of files which are not common source files. [python3-magic] - svnpath: Prints the path to the Subversion repository of a Subversion checkout. Also supports calculating the paths for branches and tags in a repository independent fashion. Used by debcommit to generate svn tags. [subversion] - tagpending: runs from a Debian source tree and tags bugs that are to be closed in the latest changelog as pending. [libsoap-lite-perl] - transition-check: Check a list of source packages for involvement in transitions for which uploads to unstable are currently blocked. [libwww-perl, libyaml-syck-perl] - uscan: Automatically scan for and download upstream updates. Uscan can also call a program such as uupdate to attempt to update the Debianised version based on the new update. Whilst uscan could be used to release the updated version automatically, it is probably better not to without testing it first. Uscan can also verify detached OpenPGP signatures if upstream's signing key is known. [file, gpgv | gpgv2, gnupg | gnupg2, libfile-dirlist-perl, libfile-touch-perl, libfile-which-perl, liblwp-protocol-https-perl, libmoo-perl, libwww-perl, unzip, xz-utils]* - uupdate: Update the package with an archive or patches from an upstream author. This will be of help if you have to update your package. It will try to apply the latest diffs to your package and tell you how successful it was. [patch] - what-patch: determine what patch system, if any, a source package is using. [patchutils] - whodepends: check which maintainers' packages depend on a package. - who-permits-upload: Retrieve information about Debian Maintainer access control lists. [gnupg | gnupg2, libencode-locale-perl, libwww-perl, debian-keyring] - who-uploads: determine the most recent uploaders of a package to the Debian archive. [gnupg | gnupg2, debian-keyring, debian-maintainers, wget] - wnpp-alert: list installed packages which are orphaned or up for adoption. [wget | curl] - wnpp-check: check whether there is an open request for packaging or intention to package bug for a package. [wget | curl] - wrap-and-sort: wrap long lines and sort items in packaging files. [python3-debian] - /usr/share/doc/devscripts/examples: This directory contains examples of procmail and exim scripts for sorting mail arriving to Debian mailing lists.
PackageMaintainer	Devscripts Maintainers <devscripts@packages.debian.org>
PackageName	devscripts
PackageSection	devel
PackageVersion	2.21.4
SHA-1	D155A08354684DCAC9A204AE5A7C45E5A44E4E89
SHA-256	EE64AA09FCD5EA4E9531BCCC8D529711902E55761EA966C7775A5EF1C723A4D9

Key	Value
FileSize	1093232
MD5	E9CA0D34104C755B63E731CE57E9BB8F
PackageDescription	scripts to make the life of a Debian Package maintainer easier Contains the following scripts, dependencies/recommendations shown in brackets afterwards: . - annotate-output: run a command and prepend time and stream (O for stdout, E for stderr) for every line of output. - archpath: Prints arch (tla/Bazaar) package names. Also supports calculating the package names for other branches. [tla | bazaar] - bts: A command-line tool for accessing the Debian Bug Tracking System, both to send mails to control@bts.debian.org and to access the web pages and SOAP interface of the BTS. [www-browser, libauthen-sasl-perl, libnet-smtps-perl, libsoap-lite-perl, liburi-perl, libwww-perl, bsd-mailx | mailx] - build-rdeps: Searches for all packages that build-depend on a given package. [dctrl-tools, dose-extra, libdpkg-perl] - chdist: tool to easily play with several distributions. [dctrl-tools] - checkbashisms: check whether a /bin/sh script contains any common bash-specific constructs. - cowpoke: upload a Debian source package to a cowbuilder host and build it, optionally also signing and uploading the result to an incoming queue. [ssh-client] - cvs-debi, cvs-debc: wrappers around debi and debc respectively (see below) which allow them to be called from the CVS working directory. [cvs-buildpackage] - cvs-debrelease: wrapper around debrelease which allows it to be called from the CVS working directory. [cvs-buildpackage, dupload | dput, ssh-client] - cvs-debuild: A wrapper for cvs-buildpackage to use debuild as its package building program. [cvs-buildpackage, fakeroot, lintian, gnupg |gnupg2] - dcmd: run a given command replacing the name of a .changes or .dsc file with each of the files referenced therein. * - dd-list: given a list of packages, pretty-print it ordered by maintainer. * - debbisect: bisect snapshot.debian.org to find which change in the archive introduced a certain problem. [mmdebstrap, python3-debian] - debc: List contents of current package. Do this after a successful "debuild" to see if the package looks all right. - debchange (abbreviation dch): Modifies debian/changelog and manages version numbers for you. It will either increment the version number or add an entry for the current version, depending upon the options given to it. [libdistro-info-perl, libsoap-lite-perl]* - debcheckout: checkout the development repository of a Debian package. * - debclean: Clean a Debian source tree. Debclean will clean all Debian source trees below the current directory, and if requested, also remove all files that were generated from these source trees (that is .deb, .dsc and .changes files). It will keep the .diffs and original files, though, so that the binaries and other files can be rebuilt if necessary. [fakeroot]* - debcommit: Commits changes to cvs, darcs, svn, svk, tla, bzr, git, or hg, using new entries in debian/changelog as the commit message. Also supports tagging Debian package releases. [cvs | darcs | subversion | svk | tla | bzr | git-core | mercurial, libtimedate-perl] - debdiff: A program which examines two .deb files or two .changes files and reports on any difference found in their file lists. Useful for ensuring that no files were inadvertently lost between versions. Can also examine two .dsc files and report on the changes between source versions. For a deeper comparison one can use the diffoscope package. [wdiff, patchutils]* - debdiff-apply: Apply unified diffs of two Debian source packages, such as those generated by debdiff, to a target Debian source package. Any changes to debian/changelog are dealt with specially, to avoid the conflicts that changelog diffs typically produce when applied naively. May be used to check that old patches still apply to newer versions of those packages. [python3-debian, python3-unidiff, quilt] - debi: Installs the current package by using the setuid root debpkg script described below. It assumes that the current package has just been built (for example by debuild), and the .deb lives in the parent directory, and will effectively run dpkg -i on the .deb. The ability to install the package with a very short command is very useful when troubleshooting packages. - debpkg: A wrapper for dpkg used by debi to allow convenient testing of packages. For debpkg to work, it needs to be made setuid root, and this needs to be performed by the sysadmin -- it is not installed as setuid root by default. (Note that being able to run a setuid root debpkg is effectively the same as having root access to the system, so this should be done with caution.) Having debpkg as a wrapper for dpkg can be a Good Thing (TM), as it decreases the potential for damage by accidental wrong use of commands in superuser mode (e.g., an inadvertent rm -rf * in the wrong directory is disastrous as many can attest to). - debrelease: A wrapper around dupload or dput which figures out which version to upload, and then calls dupload or dput to actually perform the upload. [dupload | dput, ssh-client] - debrebuild: A script that provided a .buildinfo file reports the instructions on how to try to reproduce the reported build. [sbuild | mmdebstrap, libdistro-info-perl] - debrepro: A script that tests reproducibility of Debian packages. It will build a given source directory twice, with a set of variation between the first and second build, and compare the binary packages produced. If diffoscope is installed, it is used to compare non-matching binaries. If disorderfs is installed, it is used during the build to inject non-determinism in filesystem listing operations. [faketime, diffoscope, disorderfs] - debrsign: This transfers a .changes/.dsc pair to a remote machine for signing, and runs debsign on the remote machine over an SSH connection. [gnupg | gnupg2, debian-keyring, ssh-client] - debsign: Use GNU Privacy Guard to sign the changes (and possibly dsc) files created by running dpkg-buildpackage with no-sign options. Useful if you are building a package on a remote machine and wish to sign it on a local one. This script is capable of automatically downloading the .changes and .dsc files from a remote machine. [gnupg |gnupg2, debian-keyring, ssh-client]* - debsnap: grab packages from https://snapshot.debian.org [libwww-perl, libjson-perl] - debuild: A wrapper for building a package (i.e., dpkg-buildpackage) to avoid problems with insufficient permissions and wrong paths etc. Debuild will set up the proper environment for building a package. Debuild will use the fakeroot program to build the package by default, but can be instructed to use any other gain-root command, or can even be installed setuid root. Debuild can also be used to run various of the debian/rules operations with the same root-gaining procedure. Debuild will also run lintian to check that the package does not have any major policy violations. [fakeroot, lintian, gnupg | gnupg2]* - deb-reversion: increases a binary package version number and repacks the package, useful for porters and the like. - deb-why-removed: shows the reason a package was removed from the archive. [libdpkg-perl] - dep3changelog: generate a changelog entry from a DEP3-style patch header. - desktop2menu: given a freedesktop.org desktop file, generate a skeleton for a menu file. [libfile-desktopentry-perl] - dget: Downloads Debian source and binary packages. Point at a .changes or .dsc to download all references files. Specify a package name to download it from the configured apt repository. [wget | curl] - diff2patches: extracts patches from a .diff.gz file placing them under debian/ or, if present, debian/patches. [patchutils] - dpkg-depcheck, dpkg-genbuilddeps: Runs a specified command (such as debian/rules build) or dpkg-buildpackage, respectively, to determine the packages used during the build process. This information can be helpful when trying to determine the packages needed in the Build-Depends etc. lines in the debian/control file. [build-essential, strace] - dscextract: extract a single file from a Debian source package. [patchutils] - dscverify: check the signature and MD5 sums of a dsc file against the most current Debian keyring on your system. [gnupg | gnupg2, debian-keyring] - edit-patch: add/edit a patch for a source package and commit the changes. [quilt | dpatch | cdbs] - getbuildlog: download package build logs from Debian auto-builders. [wget] - git-deborig: try to produce Debian orig.tar using git-archive(1). [libdpkg-perl, libgit-wrapper-perl, liblist-compare-perl, libstring-shellquote-perl, libtry-tiny-perl] - grep-excuses: grep britney's excuses to find out what is happening to your packages. [libdbd-pg-perl, libterm-size-perl, libyaml-syck-perl, wget, w3m] - hardening-check: report the hardening characteristics of a set of binaries. - list-unreleased: searches for packages marked UNRELEASED in their changelog. - ltnu (Long Time No Upload): List all uploads of packages by the given uploader or maintainer and display them ordered by the last upload of that package, oldest uploads first. - manpage-alert: locate binaries without corresponding manpages. [man-db] - mass-bug: mass-file bug reports. [bsd-mailx | mailx] - mergechanges: merge .changes files from the same release but built on different architectures. - mk-build-deps: Given a package name and/or control file, generate a binary package which may be installed to satisfy the build-dependencies of the given package. [equivs] - mk-origtargz: Rename upstream tarball, optionally changing the compression and removing unwanted files. [libfile-which-perl, unzip, xz-utils, file] - namecheck: Check project names are not already taken. - nmudiff: prepare a diff of this version (presumably an NMU against the previously released version (as per the changelog) and submit the diff to the BTS. [patchutils, mutt] - origtargz: fetch the orig tarball of a Debian package from various sources, and unpack it. [pristine-tar] - plotchangelog: display information from a changelog graphically using gnuplot. [libtimedate-perl, gnuplot] - pts-subscribe: subscribe to the PTS (Package Tracking System) for a limited period of time. [bsd-mailx | mailx, at] - rc-alert: list installed packages which have release-critical bugs. [wget | curl] - reproducible-check: reports on the reproducible status of installed packages. For more details please see <https://reproducible-builds.org>. - rmadison: remotely query the Debian archive database about packages. [liburi-perl, wget | curl] - sadt: run DEP-8 tests. [python3-debian] - salsa: manipulates salsa.debian.org repositories and users [libgitlab-api-v4-perl] - suspicious-source: output a list of files which are not common source files. [python3-magic] - svnpath: Prints the path to the Subversion repository of a Subversion checkout. Also supports calculating the paths for branches and tags in a repository independent fashion. Used by debcommit to generate svn tags. [subversion] - tagpending: runs from a Debian source tree and tags bugs that are to be closed in the latest changelog as pending. [libsoap-lite-perl] - transition-check: Check a list of source packages for involvement in transitions for which uploads to unstable are currently blocked. [libwww-perl, libyaml-syck-perl] - uscan: Automatically scan for and download upstream updates. Uscan can also call a program such as uupdate to attempt to update the Debianised version based on the new update. Whilst uscan could be used to release the updated version automatically, it is probably better not to without testing it first. Uscan can also verify detached OpenPGP signatures if upstream's signing key is known. [file, gpgv | gpgv2, gnupg | gnupg2, libfile-dirlist-perl, libfile-touch-perl, libfile-which-perl, liblwp-protocol-https-perl, libmoo-perl, libwww-perl, unzip, xz-utils]* - uupdate: Update the package with an archive or patches from an upstream author. This will be of help if you have to update your package. It will try to apply the latest diffs to your package and tell you how successful it was. [patch] - what-patch: determine what patch system, if any, a source package is using. [patchutils] - whodepends: check which maintainers' packages depend on a package. - who-permits-upload: Retrieve information about Debian Maintainer access control lists. [gnupg | gnupg2, libencode-locale-perl, libwww-perl, debian-keyring] - who-uploads: determine the most recent uploaders of a package to the Debian archive. [gnupg | gnupg2, debian-keyring, debian-maintainers, wget] - wnpp-alert: list installed packages which are orphaned or up for adoption. [wget | curl] - wnpp-check: check whether there is an open request for packaging or intention to package bug for a package. [wget | curl] - wrap-and-sort: wrap long lines and sort items in packaging files. [python3-debian] - /usr/share/doc/devscripts/examples: This directory contains examples of procmail and exim scripts for sorting mail arriving to Debian mailing lists.
PackageMaintainer	Devscripts Maintainers <devscripts@packages.debian.org>
PackageName	devscripts
PackageSection	devel
PackageVersion	2.21.4
SHA-1	40D0C75BFBB6242A25AB97FA9C1A453837E89346
SHA-256	2E15FEF841822A06811E84C660484307432027DF38DC53EF980D2EF0ECB12A8A

Key	Value
FileSize	1093316
MD5	7DB65353559F986CFEC5F97AB8A2852C
PackageDescription	scripts to make the life of a Debian Package maintainer easier Contains the following scripts, dependencies/recommendations shown in brackets afterwards: . - annotate-output: run a command and prepend time and stream (O for stdout, E for stderr) for every line of output. - archpath: Prints arch (tla/Bazaar) package names. Also supports calculating the package names for other branches. [tla | bazaar] - bts: A command-line tool for accessing the Debian Bug Tracking System, both to send mails to control@bts.debian.org and to access the web pages and SOAP interface of the BTS. [www-browser, libauthen-sasl-perl, libnet-smtps-perl, libsoap-lite-perl, liburi-perl, libwww-perl, bsd-mailx | mailx] - build-rdeps: Searches for all packages that build-depend on a given package. [dctrl-tools, dose-extra, libdpkg-perl] - chdist: tool to easily play with several distributions. [dctrl-tools] - checkbashisms: check whether a /bin/sh script contains any common bash-specific constructs. - cowpoke: upload a Debian source package to a cowbuilder host and build it, optionally also signing and uploading the result to an incoming queue. [ssh-client] - cvs-debi, cvs-debc: wrappers around debi and debc respectively (see below) which allow them to be called from the CVS working directory. [cvs-buildpackage] - cvs-debrelease: wrapper around debrelease which allows it to be called from the CVS working directory. [cvs-buildpackage, dupload | dput, ssh-client] - cvs-debuild: A wrapper for cvs-buildpackage to use debuild as its package building program. [cvs-buildpackage, fakeroot, lintian, gnupg |gnupg2] - dcmd: run a given command replacing the name of a .changes or .dsc file with each of the files referenced therein. * - dd-list: given a list of packages, pretty-print it ordered by maintainer. * - debbisect: bisect snapshot.debian.org to find which change in the archive introduced a certain problem. [mmdebstrap, python3-debian] - debc: List contents of current package. Do this after a successful "debuild" to see if the package looks all right. - debchange (abbreviation dch): Modifies debian/changelog and manages version numbers for you. It will either increment the version number or add an entry for the current version, depending upon the options given to it. [libdistro-info-perl, libsoap-lite-perl]* - debcheckout: checkout the development repository of a Debian package. * - debclean: Clean a Debian source tree. Debclean will clean all Debian source trees below the current directory, and if requested, also remove all files that were generated from these source trees (that is .deb, .dsc and .changes files). It will keep the .diffs and original files, though, so that the binaries and other files can be rebuilt if necessary. [fakeroot]* - debcommit: Commits changes to cvs, darcs, svn, svk, tla, bzr, git, or hg, using new entries in debian/changelog as the commit message. Also supports tagging Debian package releases. [cvs | darcs | subversion | svk | tla | bzr | git-core | mercurial, libtimedate-perl] - debdiff: A program which examines two .deb files or two .changes files and reports on any difference found in their file lists. Useful for ensuring that no files were inadvertently lost between versions. Can also examine two .dsc files and report on the changes between source versions. For a deeper comparison one can use the diffoscope package. [wdiff, patchutils]* - debdiff-apply: Apply unified diffs of two Debian source packages, such as those generated by debdiff, to a target Debian source package. Any changes to debian/changelog are dealt with specially, to avoid the conflicts that changelog diffs typically produce when applied naively. May be used to check that old patches still apply to newer versions of those packages. [python3-debian, python3-unidiff, quilt] - debi: Installs the current package by using the setuid root debpkg script described below. It assumes that the current package has just been built (for example by debuild), and the .deb lives in the parent directory, and will effectively run dpkg -i on the .deb. The ability to install the package with a very short command is very useful when troubleshooting packages. - debpkg: A wrapper for dpkg used by debi to allow convenient testing of packages. For debpkg to work, it needs to be made setuid root, and this needs to be performed by the sysadmin -- it is not installed as setuid root by default. (Note that being able to run a setuid root debpkg is effectively the same as having root access to the system, so this should be done with caution.) Having debpkg as a wrapper for dpkg can be a Good Thing (TM), as it decreases the potential for damage by accidental wrong use of commands in superuser mode (e.g., an inadvertent rm -rf * in the wrong directory is disastrous as many can attest to). - debrelease: A wrapper around dupload or dput which figures out which version to upload, and then calls dupload or dput to actually perform the upload. [dupload | dput, ssh-client] - debrebuild: A script that provided a .buildinfo file reports the instructions on how to try to reproduce the reported build. [sbuild | mmdebstrap, libdistro-info-perl] - debrepro: A script that tests reproducibility of Debian packages. It will build a given source directory twice, with a set of variation between the first and second build, and compare the binary packages produced. If diffoscope is installed, it is used to compare non-matching binaries. If disorderfs is installed, it is used during the build to inject non-determinism in filesystem listing operations. [faketime, diffoscope, disorderfs] - debrsign: This transfers a .changes/.dsc pair to a remote machine for signing, and runs debsign on the remote machine over an SSH connection. [gnupg | gnupg2, debian-keyring, ssh-client] - debsign: Use GNU Privacy Guard to sign the changes (and possibly dsc) files created by running dpkg-buildpackage with no-sign options. Useful if you are building a package on a remote machine and wish to sign it on a local one. This script is capable of automatically downloading the .changes and .dsc files from a remote machine. [gnupg |gnupg2, debian-keyring, ssh-client]* - debsnap: grab packages from https://snapshot.debian.org [libwww-perl, libjson-perl] - debuild: A wrapper for building a package (i.e., dpkg-buildpackage) to avoid problems with insufficient permissions and wrong paths etc. Debuild will set up the proper environment for building a package. Debuild will use the fakeroot program to build the package by default, but can be instructed to use any other gain-root command, or can even be installed setuid root. Debuild can also be used to run various of the debian/rules operations with the same root-gaining procedure. Debuild will also run lintian to check that the package does not have any major policy violations. [fakeroot, lintian, gnupg | gnupg2]* - deb-reversion: increases a binary package version number and repacks the package, useful for porters and the like. - deb-why-removed: shows the reason a package was removed from the archive. [libdpkg-perl] - dep3changelog: generate a changelog entry from a DEP3-style patch header. - desktop2menu: given a freedesktop.org desktop file, generate a skeleton for a menu file. [libfile-desktopentry-perl] - dget: Downloads Debian source and binary packages. Point at a .changes or .dsc to download all references files. Specify a package name to download it from the configured apt repository. [wget | curl] - diff2patches: extracts patches from a .diff.gz file placing them under debian/ or, if present, debian/patches. [patchutils] - dpkg-depcheck, dpkg-genbuilddeps: Runs a specified command (such as debian/rules build) or dpkg-buildpackage, respectively, to determine the packages used during the build process. This information can be helpful when trying to determine the packages needed in the Build-Depends etc. lines in the debian/control file. [build-essential, strace] - dscextract: extract a single file from a Debian source package. [patchutils] - dscverify: check the signature and MD5 sums of a dsc file against the most current Debian keyring on your system. [gnupg | gnupg2, debian-keyring] - edit-patch: add/edit a patch for a source package and commit the changes. [quilt | dpatch | cdbs] - getbuildlog: download package build logs from Debian auto-builders. [wget] - git-deborig: try to produce Debian orig.tar using git-archive(1). [libdpkg-perl, libgit-wrapper-perl, liblist-compare-perl, libstring-shellquote-perl, libtry-tiny-perl] - grep-excuses: grep britney's excuses to find out what is happening to your packages. [libdbd-pg-perl, libterm-size-perl, libyaml-syck-perl, wget, w3m] - hardening-check: report the hardening characteristics of a set of binaries. - list-unreleased: searches for packages marked UNRELEASED in their changelog. - ltnu (Long Time No Upload): List all uploads of packages by the given uploader or maintainer and display them ordered by the last upload of that package, oldest uploads first. - manpage-alert: locate binaries without corresponding manpages. [man-db] - mass-bug: mass-file bug reports. [bsd-mailx | mailx] - mergechanges: merge .changes files from the same release but built on different architectures. - mk-build-deps: Given a package name and/or control file, generate a binary package which may be installed to satisfy the build-dependencies of the given package. [equivs] - mk-origtargz: Rename upstream tarball, optionally changing the compression and removing unwanted files. [libfile-which-perl, unzip, xz-utils, file] - namecheck: Check project names are not already taken. - nmudiff: prepare a diff of this version (presumably an NMU against the previously released version (as per the changelog) and submit the diff to the BTS. [patchutils, mutt] - origtargz: fetch the orig tarball of a Debian package from various sources, and unpack it. [pristine-tar] - plotchangelog: display information from a changelog graphically using gnuplot. [libtimedate-perl, gnuplot] - pts-subscribe: subscribe to the PTS (Package Tracking System) for a limited period of time. [bsd-mailx | mailx, at] - rc-alert: list installed packages which have release-critical bugs. [wget | curl] - reproducible-check: reports on the reproducible status of installed packages. For more details please see <https://reproducible-builds.org>. - rmadison: remotely query the Debian archive database about packages. [liburi-perl, wget | curl] - sadt: run DEP-8 tests. [python3-debian] - salsa: manipulates salsa.debian.org repositories and users [libgitlab-api-v4-perl] - suspicious-source: output a list of files which are not common source files. [python3-magic] - svnpath: Prints the path to the Subversion repository of a Subversion checkout. Also supports calculating the paths for branches and tags in a repository independent fashion. Used by debcommit to generate svn tags. [subversion] - tagpending: runs from a Debian source tree and tags bugs that are to be closed in the latest changelog as pending. [libsoap-lite-perl] - transition-check: Check a list of source packages for involvement in transitions for which uploads to unstable are currently blocked. [libwww-perl, libyaml-syck-perl] - uscan: Automatically scan for and download upstream updates. Uscan can also call a program such as uupdate to attempt to update the Debianised version based on the new update. Whilst uscan could be used to release the updated version automatically, it is probably better not to without testing it first. Uscan can also verify detached OpenPGP signatures if upstream's signing key is known. [file, gpgv | gpgv2, gnupg | gnupg2, libfile-dirlist-perl, libfile-touch-perl, libfile-which-perl, liblwp-protocol-https-perl, libmoo-perl, libwww-perl, unzip, xz-utils]* - uupdate: Update the package with an archive or patches from an upstream author. This will be of help if you have to update your package. It will try to apply the latest diffs to your package and tell you how successful it was. [patch] - what-patch: determine what patch system, if any, a source package is using. [patchutils] - whodepends: check which maintainers' packages depend on a package. - who-permits-upload: Retrieve information about Debian Maintainer access control lists. [gnupg | gnupg2, libencode-locale-perl, libwww-perl, debian-keyring] - who-uploads: determine the most recent uploaders of a package to the Debian archive. [gnupg | gnupg2, debian-keyring, debian-maintainers, wget] - wnpp-alert: list installed packages which are orphaned or up for adoption. [wget | curl] - wnpp-check: check whether there is an open request for packaging or intention to package bug for a package. [wget | curl] - wrap-and-sort: wrap long lines and sort items in packaging files. [python3-debian] - /usr/share/doc/devscripts/examples: This directory contains examples of procmail and exim scripts for sorting mail arriving to Debian mailing lists.
PackageMaintainer	Devscripts Maintainers <devscripts@packages.debian.org>
PackageName	devscripts
PackageSection	devel
PackageVersion	2.21.4
SHA-1	FA9B83106FBC8DF7302016077F4F1EBABC6C9C02
SHA-256	84D5D1834AF886DE9024AF1975E86F40C28E066996A67E920F212E92CAAF6535

Key	Value
FileSize	1093384
MD5	626596D43A201CA2206E3A642DABCE66
PackageDescription	scripts to make the life of a Debian Package maintainer easier Contains the following scripts, dependencies/recommendations shown in brackets afterwards: . - annotate-output: run a command and prepend time and stream (O for stdout, E for stderr) for every line of output. - archpath: Prints arch (tla/Bazaar) package names. Also supports calculating the package names for other branches. [tla | bazaar] - bts: A command-line tool for accessing the Debian Bug Tracking System, both to send mails to control@bts.debian.org and to access the web pages and SOAP interface of the BTS. [www-browser, libauthen-sasl-perl, libnet-smtps-perl, libsoap-lite-perl, liburi-perl, libwww-perl, bsd-mailx | mailx] - build-rdeps: Searches for all packages that build-depend on a given package. [dctrl-tools, dose-extra, libdpkg-perl] - chdist: tool to easily play with several distributions. [dctrl-tools] - checkbashisms: check whether a /bin/sh script contains any common bash-specific constructs. - cowpoke: upload a Debian source package to a cowbuilder host and build it, optionally also signing and uploading the result to an incoming queue. [ssh-client] - cvs-debi, cvs-debc: wrappers around debi and debc respectively (see below) which allow them to be called from the CVS working directory. [cvs-buildpackage] - cvs-debrelease: wrapper around debrelease which allows it to be called from the CVS working directory. [cvs-buildpackage, dupload | dput, ssh-client] - cvs-debuild: A wrapper for cvs-buildpackage to use debuild as its package building program. [cvs-buildpackage, fakeroot, lintian, gnupg |gnupg2] - dcmd: run a given command replacing the name of a .changes or .dsc file with each of the files referenced therein. * - dd-list: given a list of packages, pretty-print it ordered by maintainer. * - debbisect: bisect snapshot.debian.org to find which change in the archive introduced a certain problem. [mmdebstrap, python3-debian] - debc: List contents of current package. Do this after a successful "debuild" to see if the package looks all right. - debchange (abbreviation dch): Modifies debian/changelog and manages version numbers for you. It will either increment the version number or add an entry for the current version, depending upon the options given to it. [libdistro-info-perl, libsoap-lite-perl]* - debcheckout: checkout the development repository of a Debian package. * - debclean: Clean a Debian source tree. Debclean will clean all Debian source trees below the current directory, and if requested, also remove all files that were generated from these source trees (that is .deb, .dsc and .changes files). It will keep the .diffs and original files, though, so that the binaries and other files can be rebuilt if necessary. [fakeroot]* - debcommit: Commits changes to cvs, darcs, svn, svk, tla, bzr, git, or hg, using new entries in debian/changelog as the commit message. Also supports tagging Debian package releases. [cvs | darcs | subversion | svk | tla | bzr | git-core | mercurial, libtimedate-perl] - debdiff: A program which examines two .deb files or two .changes files and reports on any difference found in their file lists. Useful for ensuring that no files were inadvertently lost between versions. Can also examine two .dsc files and report on the changes between source versions. For a deeper comparison one can use the diffoscope package. [wdiff, patchutils]* - debdiff-apply: Apply unified diffs of two Debian source packages, such as those generated by debdiff, to a target Debian source package. Any changes to debian/changelog are dealt with specially, to avoid the conflicts that changelog diffs typically produce when applied naively. May be used to check that old patches still apply to newer versions of those packages. [python3-debian, python3-unidiff, quilt] - debi: Installs the current package by using the setuid root debpkg script described below. It assumes that the current package has just been built (for example by debuild), and the .deb lives in the parent directory, and will effectively run dpkg -i on the .deb. The ability to install the package with a very short command is very useful when troubleshooting packages. - debpkg: A wrapper for dpkg used by debi to allow convenient testing of packages. For debpkg to work, it needs to be made setuid root, and this needs to be performed by the sysadmin -- it is not installed as setuid root by default. (Note that being able to run a setuid root debpkg is effectively the same as having root access to the system, so this should be done with caution.) Having debpkg as a wrapper for dpkg can be a Good Thing (TM), as it decreases the potential for damage by accidental wrong use of commands in superuser mode (e.g., an inadvertent rm -rf * in the wrong directory is disastrous as many can attest to). - debrelease: A wrapper around dupload or dput which figures out which version to upload, and then calls dupload or dput to actually perform the upload. [dupload | dput, ssh-client] - debrebuild: A script that provided a .buildinfo file reports the instructions on how to try to reproduce the reported build. [sbuild | mmdebstrap, libdistro-info-perl] - debrepro: A script that tests reproducibility of Debian packages. It will build a given source directory twice, with a set of variation between the first and second build, and compare the binary packages produced. If diffoscope is installed, it is used to compare non-matching binaries. If disorderfs is installed, it is used during the build to inject non-determinism in filesystem listing operations. [faketime, diffoscope, disorderfs] - debrsign: This transfers a .changes/.dsc pair to a remote machine for signing, and runs debsign on the remote machine over an SSH connection. [gnupg | gnupg2, debian-keyring, ssh-client] - debsign: Use GNU Privacy Guard to sign the changes (and possibly dsc) files created by running dpkg-buildpackage with no-sign options. Useful if you are building a package on a remote machine and wish to sign it on a local one. This script is capable of automatically downloading the .changes and .dsc files from a remote machine. [gnupg |gnupg2, debian-keyring, ssh-client]* - debsnap: grab packages from https://snapshot.debian.org [libwww-perl, libjson-perl] - debuild: A wrapper for building a package (i.e., dpkg-buildpackage) to avoid problems with insufficient permissions and wrong paths etc. Debuild will set up the proper environment for building a package. Debuild will use the fakeroot program to build the package by default, but can be instructed to use any other gain-root command, or can even be installed setuid root. Debuild can also be used to run various of the debian/rules operations with the same root-gaining procedure. Debuild will also run lintian to check that the package does not have any major policy violations. [fakeroot, lintian, gnupg | gnupg2]* - deb-reversion: increases a binary package version number and repacks the package, useful for porters and the like. - deb-why-removed: shows the reason a package was removed from the archive. [libdpkg-perl] - dep3changelog: generate a changelog entry from a DEP3-style patch header. - desktop2menu: given a freedesktop.org desktop file, generate a skeleton for a menu file. [libfile-desktopentry-perl] - dget: Downloads Debian source and binary packages. Point at a .changes or .dsc to download all references files. Specify a package name to download it from the configured apt repository. [wget | curl] - diff2patches: extracts patches from a .diff.gz file placing them under debian/ or, if present, debian/patches. [patchutils] - dpkg-depcheck, dpkg-genbuilddeps: Runs a specified command (such as debian/rules build) or dpkg-buildpackage, respectively, to determine the packages used during the build process. This information can be helpful when trying to determine the packages needed in the Build-Depends etc. lines in the debian/control file. [build-essential, strace] - dscextract: extract a single file from a Debian source package. [patchutils] - dscverify: check the signature and MD5 sums of a dsc file against the most current Debian keyring on your system. [gnupg | gnupg2, debian-keyring] - edit-patch: add/edit a patch for a source package and commit the changes. [quilt | dpatch | cdbs] - getbuildlog: download package build logs from Debian auto-builders. [wget] - git-deborig: try to produce Debian orig.tar using git-archive(1). [libdpkg-perl, libgit-wrapper-perl, liblist-compare-perl, libstring-shellquote-perl, libtry-tiny-perl] - grep-excuses: grep britney's excuses to find out what is happening to your packages. [libdbd-pg-perl, libterm-size-perl, libyaml-syck-perl, wget, w3m] - hardening-check: report the hardening characteristics of a set of binaries. - list-unreleased: searches for packages marked UNRELEASED in their changelog. - ltnu (Long Time No Upload): List all uploads of packages by the given uploader or maintainer and display them ordered by the last upload of that package, oldest uploads first. - manpage-alert: locate binaries without corresponding manpages. [man-db] - mass-bug: mass-file bug reports. [bsd-mailx | mailx] - mergechanges: merge .changes files from the same release but built on different architectures. - mk-build-deps: Given a package name and/or control file, generate a binary package which may be installed to satisfy the build-dependencies of the given package. [equivs] - mk-origtargz: Rename upstream tarball, optionally changing the compression and removing unwanted files. [libfile-which-perl, unzip, xz-utils, file] - namecheck: Check project names are not already taken. - nmudiff: prepare a diff of this version (presumably an NMU against the previously released version (as per the changelog) and submit the diff to the BTS. [patchutils, mutt] - origtargz: fetch the orig tarball of a Debian package from various sources, and unpack it. [pristine-tar] - plotchangelog: display information from a changelog graphically using gnuplot. [libtimedate-perl, gnuplot] - pts-subscribe: subscribe to the PTS (Package Tracking System) for a limited period of time. [bsd-mailx | mailx, at] - rc-alert: list installed packages which have release-critical bugs. [wget | curl] - reproducible-check: reports on the reproducible status of installed packages. For more details please see <https://reproducible-builds.org>. - rmadison: remotely query the Debian archive database about packages. [liburi-perl, wget | curl] - sadt: run DEP-8 tests. [python3-debian] - salsa: manipulates salsa.debian.org repositories and users [libgitlab-api-v4-perl] - suspicious-source: output a list of files which are not common source files. [python3-magic] - svnpath: Prints the path to the Subversion repository of a Subversion checkout. Also supports calculating the paths for branches and tags in a repository independent fashion. Used by debcommit to generate svn tags. [subversion] - tagpending: runs from a Debian source tree and tags bugs that are to be closed in the latest changelog as pending. [libsoap-lite-perl] - transition-check: Check a list of source packages for involvement in transitions for which uploads to unstable are currently blocked. [libwww-perl, libyaml-syck-perl] - uscan: Automatically scan for and download upstream updates. Uscan can also call a program such as uupdate to attempt to update the Debianised version based on the new update. Whilst uscan could be used to release the updated version automatically, it is probably better not to without testing it first. Uscan can also verify detached OpenPGP signatures if upstream's signing key is known. [file, gpgv | gpgv2, gnupg | gnupg2, libfile-dirlist-perl, libfile-touch-perl, libfile-which-perl, liblwp-protocol-https-perl, libmoo-perl, libwww-perl, unzip, xz-utils]* - uupdate: Update the package with an archive or patches from an upstream author. This will be of help if you have to update your package. It will try to apply the latest diffs to your package and tell you how successful it was. [patch] - what-patch: determine what patch system, if any, a source package is using. [patchutils] - whodepends: check which maintainers' packages depend on a package. - who-permits-upload: Retrieve information about Debian Maintainer access control lists. [gnupg | gnupg2, libencode-locale-perl, libwww-perl, debian-keyring] - who-uploads: determine the most recent uploaders of a package to the Debian archive. [gnupg | gnupg2, debian-keyring, debian-maintainers, wget] - wnpp-alert: list installed packages which are orphaned or up for adoption. [wget | curl] - wnpp-check: check whether there is an open request for packaging or intention to package bug for a package. [wget | curl] - wrap-and-sort: wrap long lines and sort items in packaging files. [python3-debian] - /usr/share/doc/devscripts/examples: This directory contains examples of procmail and exim scripts for sorting mail arriving to Debian mailing lists.
PackageMaintainer	Devscripts Maintainers <devscripts@packages.debian.org>
PackageName	devscripts
PackageSection	devel
PackageVersion	2.21.4
SHA-1	28A3568BE3C9B1F68D3A43166769035C2B22606A
SHA-256	C2460744CF241D92EF6717EE1684B055693777F8E5A6598D0125A68F1390076E

Key	Value
FileSize	1093536
MD5	A3DB688E57DF3C6F5843449F63204227
PackageDescription	scripts to make the life of a Debian Package maintainer easier Contains the following scripts, dependencies/recommendations shown in brackets afterwards: . - annotate-output: run a command and prepend time and stream (O for stdout, E for stderr) for every line of output. - archpath: Prints arch (tla/Bazaar) package names. Also supports calculating the package names for other branches. [tla | bazaar] - bts: A command-line tool for accessing the Debian Bug Tracking System, both to send mails to control@bts.debian.org and to access the web pages and SOAP interface of the BTS. [www-browser, libauthen-sasl-perl, libnet-smtps-perl, libsoap-lite-perl, liburi-perl, libwww-perl, bsd-mailx | mailx] - build-rdeps: Searches for all packages that build-depend on a given package. [dctrl-tools, dose-extra, libdpkg-perl] - chdist: tool to easily play with several distributions. [dctrl-tools] - checkbashisms: check whether a /bin/sh script contains any common bash-specific constructs. - cowpoke: upload a Debian source package to a cowbuilder host and build it, optionally also signing and uploading the result to an incoming queue. [ssh-client] - cvs-debi, cvs-debc: wrappers around debi and debc respectively (see below) which allow them to be called from the CVS working directory. [cvs-buildpackage] - cvs-debrelease: wrapper around debrelease which allows it to be called from the CVS working directory. [cvs-buildpackage, dupload | dput, ssh-client] - cvs-debuild: A wrapper for cvs-buildpackage to use debuild as its package building program. [cvs-buildpackage, fakeroot, lintian, gnupg |gnupg2] - dcmd: run a given command replacing the name of a .changes or .dsc file with each of the files referenced therein. * - dd-list: given a list of packages, pretty-print it ordered by maintainer. * - debbisect: bisect snapshot.debian.org to find which change in the archive introduced a certain problem. [mmdebstrap, python3-debian] - debc: List contents of current package. Do this after a successful "debuild" to see if the package looks all right. - debchange (abbreviation dch): Modifies debian/changelog and manages version numbers for you. It will either increment the version number or add an entry for the current version, depending upon the options given to it. [libdistro-info-perl, libsoap-lite-perl]* - debcheckout: checkout the development repository of a Debian package. * - debclean: Clean a Debian source tree. Debclean will clean all Debian source trees below the current directory, and if requested, also remove all files that were generated from these source trees (that is .deb, .dsc and .changes files). It will keep the .diffs and original files, though, so that the binaries and other files can be rebuilt if necessary. [fakeroot]* - debcommit: Commits changes to cvs, darcs, svn, svk, tla, bzr, git, or hg, using new entries in debian/changelog as the commit message. Also supports tagging Debian package releases. [cvs | darcs | subversion | svk | tla | bzr | git-core | mercurial, libtimedate-perl] - debdiff: A program which examines two .deb files or two .changes files and reports on any difference found in their file lists. Useful for ensuring that no files were inadvertently lost between versions. Can also examine two .dsc files and report on the changes between source versions. For a deeper comparison one can use the diffoscope package. [wdiff, patchutils]* - debdiff-apply: Apply unified diffs of two Debian source packages, such as those generated by debdiff, to a target Debian source package. Any changes to debian/changelog are dealt with specially, to avoid the conflicts that changelog diffs typically produce when applied naively. May be used to check that old patches still apply to newer versions of those packages. [python3-debian, python3-unidiff, quilt] - debi: Installs the current package by using the setuid root debpkg script described below. It assumes that the current package has just been built (for example by debuild), and the .deb lives in the parent directory, and will effectively run dpkg -i on the .deb. The ability to install the package with a very short command is very useful when troubleshooting packages. - debpkg: A wrapper for dpkg used by debi to allow convenient testing of packages. For debpkg to work, it needs to be made setuid root, and this needs to be performed by the sysadmin -- it is not installed as setuid root by default. (Note that being able to run a setuid root debpkg is effectively the same as having root access to the system, so this should be done with caution.) Having debpkg as a wrapper for dpkg can be a Good Thing (TM), as it decreases the potential for damage by accidental wrong use of commands in superuser mode (e.g., an inadvertent rm -rf * in the wrong directory is disastrous as many can attest to). - debrelease: A wrapper around dupload or dput which figures out which version to upload, and then calls dupload or dput to actually perform the upload. [dupload | dput, ssh-client] - debrebuild: A script that provided a .buildinfo file reports the instructions on how to try to reproduce the reported build. [sbuild | mmdebstrap, libdistro-info-perl] - debrepro: A script that tests reproducibility of Debian packages. It will build a given source directory twice, with a set of variation between the first and second build, and compare the binary packages produced. If diffoscope is installed, it is used to compare non-matching binaries. If disorderfs is installed, it is used during the build to inject non-determinism in filesystem listing operations. [faketime, diffoscope, disorderfs] - debrsign: This transfers a .changes/.dsc pair to a remote machine for signing, and runs debsign on the remote machine over an SSH connection. [gnupg | gnupg2, debian-keyring, ssh-client] - debsign: Use GNU Privacy Guard to sign the changes (and possibly dsc) files created by running dpkg-buildpackage with no-sign options. Useful if you are building a package on a remote machine and wish to sign it on a local one. This script is capable of automatically downloading the .changes and .dsc files from a remote machine. [gnupg |gnupg2, debian-keyring, ssh-client]* - debsnap: grab packages from https://snapshot.debian.org [libwww-perl, libjson-perl] - debuild: A wrapper for building a package (i.e., dpkg-buildpackage) to avoid problems with insufficient permissions and wrong paths etc. Debuild will set up the proper environment for building a package. Debuild will use the fakeroot program to build the package by default, but can be instructed to use any other gain-root command, or can even be installed setuid root. Debuild can also be used to run various of the debian/rules operations with the same root-gaining procedure. Debuild will also run lintian to check that the package does not have any major policy violations. [fakeroot, lintian, gnupg | gnupg2]* - deb-reversion: increases a binary package version number and repacks the package, useful for porters and the like. - deb-why-removed: shows the reason a package was removed from the archive. [libdpkg-perl] - dep3changelog: generate a changelog entry from a DEP3-style patch header. - desktop2menu: given a freedesktop.org desktop file, generate a skeleton for a menu file. [libfile-desktopentry-perl] - dget: Downloads Debian source and binary packages. Point at a .changes or .dsc to download all references files. Specify a package name to download it from the configured apt repository. [wget | curl] - diff2patches: extracts patches from a .diff.gz file placing them under debian/ or, if present, debian/patches. [patchutils] - dpkg-depcheck, dpkg-genbuilddeps: Runs a specified command (such as debian/rules build) or dpkg-buildpackage, respectively, to determine the packages used during the build process. This information can be helpful when trying to determine the packages needed in the Build-Depends etc. lines in the debian/control file. [build-essential, strace] - dscextract: extract a single file from a Debian source package. [patchutils] - dscverify: check the signature and MD5 sums of a dsc file against the most current Debian keyring on your system. [gnupg | gnupg2, debian-keyring] - edit-patch: add/edit a patch for a source package and commit the changes. [quilt | dpatch | cdbs] - getbuildlog: download package build logs from Debian auto-builders. [wget] - git-deborig: try to produce Debian orig.tar using git-archive(1). [libdpkg-perl, libgit-wrapper-perl, liblist-compare-perl, libstring-shellquote-perl, libtry-tiny-perl] - grep-excuses: grep britney's excuses to find out what is happening to your packages. [libdbd-pg-perl, libterm-size-perl, libyaml-syck-perl, wget, w3m] - hardening-check: report the hardening characteristics of a set of binaries. - list-unreleased: searches for packages marked UNRELEASED in their changelog. - ltnu (Long Time No Upload): List all uploads of packages by the given uploader or maintainer and display them ordered by the last upload of that package, oldest uploads first. - manpage-alert: locate binaries without corresponding manpages. [man-db] - mass-bug: mass-file bug reports. [bsd-mailx | mailx] - mergechanges: merge .changes files from the same release but built on different architectures. - mk-build-deps: Given a package name and/or control file, generate a binary package which may be installed to satisfy the build-dependencies of the given package. [equivs] - mk-origtargz: Rename upstream tarball, optionally changing the compression and removing unwanted files. [libfile-which-perl, unzip, xz-utils, file] - namecheck: Check project names are not already taken. - nmudiff: prepare a diff of this version (presumably an NMU against the previously released version (as per the changelog) and submit the diff to the BTS. [patchutils, mutt] - origtargz: fetch the orig tarball of a Debian package from various sources, and unpack it. [pristine-tar] - plotchangelog: display information from a changelog graphically using gnuplot. [libtimedate-perl, gnuplot] - pts-subscribe: subscribe to the PTS (Package Tracking System) for a limited period of time. [bsd-mailx | mailx, at] - rc-alert: list installed packages which have release-critical bugs. [wget | curl] - reproducible-check: reports on the reproducible status of installed packages. For more details please see <https://reproducible-builds.org>. - rmadison: remotely query the Debian archive database about packages. [liburi-perl, wget | curl] - sadt: run DEP-8 tests. [python3-debian] - salsa: manipulates salsa.debian.org repositories and users [libgitlab-api-v4-perl] - suspicious-source: output a list of files which are not common source files. [python3-magic] - svnpath: Prints the path to the Subversion repository of a Subversion checkout. Also supports calculating the paths for branches and tags in a repository independent fashion. Used by debcommit to generate svn tags. [subversion] - tagpending: runs from a Debian source tree and tags bugs that are to be closed in the latest changelog as pending. [libsoap-lite-perl] - transition-check: Check a list of source packages for involvement in transitions for which uploads to unstable are currently blocked. [libwww-perl, libyaml-syck-perl] - uscan: Automatically scan for and download upstream updates. Uscan can also call a program such as uupdate to attempt to update the Debianised version based on the new update. Whilst uscan could be used to release the updated version automatically, it is probably better not to without testing it first. Uscan can also verify detached OpenPGP signatures if upstream's signing key is known. [file, gpgv | gpgv2, gnupg | gnupg2, libfile-dirlist-perl, libfile-touch-perl, libfile-which-perl, liblwp-protocol-https-perl, libmoo-perl, libwww-perl, unzip, xz-utils]* - uupdate: Update the package with an archive or patches from an upstream author. This will be of help if you have to update your package. It will try to apply the latest diffs to your package and tell you how successful it was. [patch] - what-patch: determine what patch system, if any, a source package is using. [patchutils] - whodepends: check which maintainers' packages depend on a package. - who-permits-upload: Retrieve information about Debian Maintainer access control lists. [gnupg | gnupg2, libencode-locale-perl, libwww-perl, debian-keyring] - who-uploads: determine the most recent uploaders of a package to the Debian archive. [gnupg | gnupg2, debian-keyring, debian-maintainers, wget] - wnpp-alert: list installed packages which are orphaned or up for adoption. [wget | curl] - wnpp-check: check whether there is an open request for packaging or intention to package bug for a package. [wget | curl] - wrap-and-sort: wrap long lines and sort items in packaging files. [python3-debian] - /usr/share/doc/devscripts/examples: This directory contains examples of procmail and exim scripts for sorting mail arriving to Debian mailing lists.
PackageMaintainer	Devscripts Maintainers <devscripts@packages.debian.org>
PackageName	devscripts
PackageSection	devel
PackageVersion	2.21.4
SHA-1	1F93996DA0EC576BA292D6E2D6BD2E19CED91C33
SHA-256	157E37A7C3A67A940CCFF5DC3776761E3B49CA0AD7B0F817C837533104E703EF

Key	Value
FileSize	1093520
MD5	0C3FAD6B2D13CA91FF7CB141EECAB55C
PackageDescription	scripts to make the life of a Debian Package maintainer easier Contains the following scripts, dependencies/recommendations shown in brackets afterwards: . - annotate-output: run a command and prepend time and stream (O for stdout, E for stderr) for every line of output. - archpath: Prints arch (tla/Bazaar) package names. Also supports calculating the package names for other branches. [tla | bazaar] - bts: A command-line tool for accessing the Debian Bug Tracking System, both to send mails to control@bts.debian.org and to access the web pages and SOAP interface of the BTS. [www-browser, libauthen-sasl-perl, libnet-smtps-perl, libsoap-lite-perl, liburi-perl, libwww-perl, bsd-mailx | mailx] - build-rdeps: Searches for all packages that build-depend on a given package. [dctrl-tools, dose-extra, libdpkg-perl] - chdist: tool to easily play with several distributions. [dctrl-tools] - checkbashisms: check whether a /bin/sh script contains any common bash-specific constructs. - cowpoke: upload a Debian source package to a cowbuilder host and build it, optionally also signing and uploading the result to an incoming queue. [ssh-client] - cvs-debi, cvs-debc: wrappers around debi and debc respectively (see below) which allow them to be called from the CVS working directory. [cvs-buildpackage] - cvs-debrelease: wrapper around debrelease which allows it to be called from the CVS working directory. [cvs-buildpackage, dupload | dput, ssh-client] - cvs-debuild: A wrapper for cvs-buildpackage to use debuild as its package building program. [cvs-buildpackage, fakeroot, lintian, gnupg |gnupg2] - dcmd: run a given command replacing the name of a .changes or .dsc file with each of the files referenced therein. * - dd-list: given a list of packages, pretty-print it ordered by maintainer. * - debbisect: bisect snapshot.debian.org to find which change in the archive introduced a certain problem. [mmdebstrap, python3-debian] - debc: List contents of current package. Do this after a successful "debuild" to see if the package looks all right. - debchange (abbreviation dch): Modifies debian/changelog and manages version numbers for you. It will either increment the version number or add an entry for the current version, depending upon the options given to it. [libdistro-info-perl, libsoap-lite-perl]* - debcheckout: checkout the development repository of a Debian package. * - debclean: Clean a Debian source tree. Debclean will clean all Debian source trees below the current directory, and if requested, also remove all files that were generated from these source trees (that is .deb, .dsc and .changes files). It will keep the .diffs and original files, though, so that the binaries and other files can be rebuilt if necessary. [fakeroot]* - debcommit: Commits changes to cvs, darcs, svn, svk, tla, bzr, git, or hg, using new entries in debian/changelog as the commit message. Also supports tagging Debian package releases. [cvs | darcs | subversion | svk | tla | bzr | git-core | mercurial, libtimedate-perl] - debdiff: A program which examines two .deb files or two .changes files and reports on any difference found in their file lists. Useful for ensuring that no files were inadvertently lost between versions. Can also examine two .dsc files and report on the changes between source versions. For a deeper comparison one can use the diffoscope package. [wdiff, patchutils]* - debdiff-apply: Apply unified diffs of two Debian source packages, such as those generated by debdiff, to a target Debian source package. Any changes to debian/changelog are dealt with specially, to avoid the conflicts that changelog diffs typically produce when applied naively. May be used to check that old patches still apply to newer versions of those packages. [python3-debian, python3-unidiff, quilt] - debi: Installs the current package by using the setuid root debpkg script described below. It assumes that the current package has just been built (for example by debuild), and the .deb lives in the parent directory, and will effectively run dpkg -i on the .deb. The ability to install the package with a very short command is very useful when troubleshooting packages. - debpkg: A wrapper for dpkg used by debi to allow convenient testing of packages. For debpkg to work, it needs to be made setuid root, and this needs to be performed by the sysadmin -- it is not installed as setuid root by default. (Note that being able to run a setuid root debpkg is effectively the same as having root access to the system, so this should be done with caution.) Having debpkg as a wrapper for dpkg can be a Good Thing (TM), as it decreases the potential for damage by accidental wrong use of commands in superuser mode (e.g., an inadvertent rm -rf * in the wrong directory is disastrous as many can attest to). - debrelease: A wrapper around dupload or dput which figures out which version to upload, and then calls dupload or dput to actually perform the upload. [dupload | dput, ssh-client] - debrebuild: A script that provided a .buildinfo file reports the instructions on how to try to reproduce the reported build. [sbuild | mmdebstrap, libdistro-info-perl] - debrepro: A script that tests reproducibility of Debian packages. It will build a given source directory twice, with a set of variation between the first and second build, and compare the binary packages produced. If diffoscope is installed, it is used to compare non-matching binaries. If disorderfs is installed, it is used during the build to inject non-determinism in filesystem listing operations. [faketime, diffoscope, disorderfs] - debrsign: This transfers a .changes/.dsc pair to a remote machine for signing, and runs debsign on the remote machine over an SSH connection. [gnupg | gnupg2, debian-keyring, ssh-client] - debsign: Use GNU Privacy Guard to sign the changes (and possibly dsc) files created by running dpkg-buildpackage with no-sign options. Useful if you are building a package on a remote machine and wish to sign it on a local one. This script is capable of automatically downloading the .changes and .dsc files from a remote machine. [gnupg |gnupg2, debian-keyring, ssh-client]* - debsnap: grab packages from https://snapshot.debian.org [libwww-perl, libjson-perl] - debuild: A wrapper for building a package (i.e., dpkg-buildpackage) to avoid problems with insufficient permissions and wrong paths etc. Debuild will set up the proper environment for building a package. Debuild will use the fakeroot program to build the package by default, but can be instructed to use any other gain-root command, or can even be installed setuid root. Debuild can also be used to run various of the debian/rules operations with the same root-gaining procedure. Debuild will also run lintian to check that the package does not have any major policy violations. [fakeroot, lintian, gnupg | gnupg2]* - deb-reversion: increases a binary package version number and repacks the package, useful for porters and the like. - deb-why-removed: shows the reason a package was removed from the archive. [libdpkg-perl] - dep3changelog: generate a changelog entry from a DEP3-style patch header. - desktop2menu: given a freedesktop.org desktop file, generate a skeleton for a menu file. [libfile-desktopentry-perl] - dget: Downloads Debian source and binary packages. Point at a .changes or .dsc to download all references files. Specify a package name to download it from the configured apt repository. [wget | curl] - diff2patches: extracts patches from a .diff.gz file placing them under debian/ or, if present, debian/patches. [patchutils] - dpkg-depcheck, dpkg-genbuilddeps: Runs a specified command (such as debian/rules build) or dpkg-buildpackage, respectively, to determine the packages used during the build process. This information can be helpful when trying to determine the packages needed in the Build-Depends etc. lines in the debian/control file. [build-essential, strace] - dscextract: extract a single file from a Debian source package. [patchutils] - dscverify: check the signature and MD5 sums of a dsc file against the most current Debian keyring on your system. [gnupg | gnupg2, debian-keyring] - edit-patch: add/edit a patch for a source package and commit the changes. [quilt | dpatch | cdbs] - getbuildlog: download package build logs from Debian auto-builders. [wget] - git-deborig: try to produce Debian orig.tar using git-archive(1). [libdpkg-perl, libgit-wrapper-perl, liblist-compare-perl, libstring-shellquote-perl, libtry-tiny-perl] - grep-excuses: grep britney's excuses to find out what is happening to your packages. [libdbd-pg-perl, libterm-size-perl, libyaml-syck-perl, wget, w3m] - hardening-check: report the hardening characteristics of a set of binaries. - list-unreleased: searches for packages marked UNRELEASED in their changelog. - ltnu (Long Time No Upload): List all uploads of packages by the given uploader or maintainer and display them ordered by the last upload of that package, oldest uploads first. - manpage-alert: locate binaries without corresponding manpages. [man-db] - mass-bug: mass-file bug reports. [bsd-mailx | mailx] - mergechanges: merge .changes files from the same release but built on different architectures. - mk-build-deps: Given a package name and/or control file, generate a binary package which may be installed to satisfy the build-dependencies of the given package. [equivs] - mk-origtargz: Rename upstream tarball, optionally changing the compression and removing unwanted files. [libfile-which-perl, unzip, xz-utils, file] - namecheck: Check project names are not already taken. - nmudiff: prepare a diff of this version (presumably an NMU against the previously released version (as per the changelog) and submit the diff to the BTS. [patchutils, mutt] - origtargz: fetch the orig tarball of a Debian package from various sources, and unpack it. [pristine-tar] - plotchangelog: display information from a changelog graphically using gnuplot. [libtimedate-perl, gnuplot] - pts-subscribe: subscribe to the PTS (Package Tracking System) for a limited period of time. [bsd-mailx | mailx, at] - rc-alert: list installed packages which have release-critical bugs. [wget | curl] - reproducible-check: reports on the reproducible status of installed packages. For more details please see <https://reproducible-builds.org>. - rmadison: remotely query the Debian archive database about packages. [liburi-perl, wget | curl] - sadt: run DEP-8 tests. [python3-debian] - salsa: manipulates salsa.debian.org repositories and users [libgitlab-api-v4-perl] - suspicious-source: output a list of files which are not common source files. [python3-magic] - svnpath: Prints the path to the Subversion repository of a Subversion checkout. Also supports calculating the paths for branches and tags in a repository independent fashion. Used by debcommit to generate svn tags. [subversion] - tagpending: runs from a Debian source tree and tags bugs that are to be closed in the latest changelog as pending. [libsoap-lite-perl] - transition-check: Check a list of source packages for involvement in transitions for which uploads to unstable are currently blocked. [libwww-perl, libyaml-syck-perl] - uscan: Automatically scan for and download upstream updates. Uscan can also call a program such as uupdate to attempt to update the Debianised version based on the new update. Whilst uscan could be used to release the updated version automatically, it is probably better not to without testing it first. Uscan can also verify detached OpenPGP signatures if upstream's signing key is known. [file, gpgv | gpgv2, gnupg | gnupg2, libfile-dirlist-perl, libfile-touch-perl, libfile-which-perl, liblwp-protocol-https-perl, libmoo-perl, libwww-perl, unzip, xz-utils]* - uupdate: Update the package with an archive or patches from an upstream author. This will be of help if you have to update your package. It will try to apply the latest diffs to your package and tell you how successful it was. [patch] - what-patch: determine what patch system, if any, a source package is using. [patchutils] - whodepends: check which maintainers' packages depend on a package. - who-permits-upload: Retrieve information about Debian Maintainer access control lists. [gnupg | gnupg2, libencode-locale-perl, libwww-perl, debian-keyring] - who-uploads: determine the most recent uploaders of a package to the Debian archive. [gnupg | gnupg2, debian-keyring, debian-maintainers, wget] - wnpp-alert: list installed packages which are orphaned or up for adoption. [wget | curl] - wnpp-check: check whether there is an open request for packaging or intention to package bug for a package. [wget | curl] - wrap-and-sort: wrap long lines and sort items in packaging files. [python3-debian] - /usr/share/doc/devscripts/examples: This directory contains examples of procmail and exim scripts for sorting mail arriving to Debian mailing lists.
PackageMaintainer	Devscripts Maintainers <devscripts@packages.debian.org>
PackageName	devscripts
PackageSection	devel
PackageVersion	2.21.4
SHA-1	C655CD46310A5E8E4F0B20335C2CC9871074B7FF
SHA-256	4C90538441E54BD9D0A37EA8ED1C3D3A6B06DFA196AAEAF04D797D343BB2635A