Parents (Total: 39)

The searched file hash is included in 39 parent files which include package known and seen by metalookup. A sample is included below:

Key	Value
MD5	06AC6B07D4FD43BA84259C757E2D8CD0
PackageArch	x86_64
PackageDescription	PrusaSlicer takes 3D models (STL, OBJ, AMF) and converts them into G-code instructions for FFF printers or PNG layers for mSLA 3D printers. It's compatible with any modern printer based on the RepRap toolchain, including all those based on the Marlin, Prusa, Sprinter and Repetier firmware. It also works with Mach3, LinuxCNC and Machinekit controllers. PrusaSlicer is based on Slic3r by Alessandro Ranelucci and the RepRap community.
PackageMaintainer	Fedora Project
PackageName	prusa-slicer
PackageRelease	1.fc32
PackageVersion	2.2.0
SHA-1	04ED9766966EFC93FCF3F978D7E1A56CCD470882
SHA-256	6B2114F77FBFF5CA2EED812D6BA7D6B0629EB8E1CDA475B7C5C617D228C5FBBC

Key	Value
FileSize	26990116
MD5	09E4BC646335E3CE1A92A764499728B7
PackageDescription	G-code generator for 3D printers PrusaSlicer converts digital 3D models into printing instructions (G-code) for your 3D printer. It cuts the model into horizontal slices (layers), generates toolpaths to fill them and calculates the amount of material to be extruded. . PrusaSlicer supports input in the STL, AMF and OBJ formats, and can output G-code for several series of 3D printers, including RepRap, Ultimaker, Makerbot, as well as SVG files for DLP printers. . It can be used with a graphical interface, or in batch mode via the command-line.
PackageMaintainer	Debian 3-D Printing Packages <3dprinter-general@lists.alioth.debian.org>
PackageName	prusa-slicer
PackageSection	misc
PackageVersion	2.3.1+dfsg-1+b2
SHA-1	06E94BDAED68674DE138E44181A707FD94F424D1
SHA-256	4B598B5C5DDEA7A36383BB3B9C79A6C478036177D89C121824D34E42A3AEE077

Key	Value
MD5	C8D5B7FD99803B90A845B69178DDB271
PackageArch	x86_64
PackageDescription	PrusaSlicer takes 3D models (STL, OBJ, AMF) and converts them into G-code instructions for FFF printers or PNG layers for mSLA 3D printers. It's compatible with any modern printer based on the RepRap toolchain, including all those based on the Marlin, Prusa, Sprinter and Repetier firmware. It also works with Mach3, LinuxCNC and Machinekit controllers. PrusaSlicer is based on Slic3r by Alessandro Ranelucci and the RepRap community.
PackageMaintainer	Fedora Project
PackageName	prusa-slicer
PackageRelease	11.fc34
PackageVersion	2.2.0
SHA-1	0AEA08BDACCBBADCE708E8FF57D40F71B1AFDC41
SHA-256	069956669F872B7E8339400BF9F68F794DFE3F0717501F8B7074A5AC51482A0C

Key	Value
SHA-1	0AFA2E2700F1056392E34253EBC69D1364716257
snap-authority	canonical
snap-filename	nMCkMCzUuBxyI7UtoiHdsJsapT8mUfbY_29.snap
snap-id	nMCkMCzUuBxyI7UtoiHdsJsapT8mUfbY_29
snap-name	prusa-slicer
snap-publisher-id	EdJm3h1azpdLixkMX9CgATpb6R8HOHkX
snap-signkey	BWDEoaqyr25nF5SNCvEv2v7QnM9QsfCc0PBMYD_i2NGSQ32EF2d4D0hqUel3m8ul
snap-timestamp	2020-06-19T04:53:52.150905Z
source-url	https://api.snapcraft.io/api/v1/snaps/download/nMCkMCzUuBxyI7UtoiHdsJsapT8mUfbY_29.snap

Key	Value
FileSize	22051552
MD5	FA7B5DA393F89135543A0B374792CE2E
PackageDescription	G-code generator for 3D printers PrusaSlicer converts digital 3D models into printing instructions (G-code) for your 3D printer. It cuts the model into horizontal slices (layers), generates toolpaths to fill them and calculates the amount of material to be extruded. . PrusaSlicer supports input in the STL, AMF and OBJ formats, and can output G-code for several series of 3D printers, including RepRap, Ultimaker, Makerbot, as well as SVG files for DLP printers. . It can be used with a graphical interface, or in batch mode via the command-line.
PackageMaintainer	Debian 3-D Printing Packages <3dprinter-general@lists.alioth.debian.org>
PackageName	prusa-slicer
PackageSection	misc
PackageVersion	2.3.0+dfsg-1
SHA-1	13F8C3A768E7CFE8C085A42D30DB792A38AD43D5
SHA-256	C45FE9D25046F49418D5C2A7FFBA1CDDE4866C325C0B2DA6DF351DA1A2BE834A

Key	Value
FileSize	21324488
MD5	6E35B9279BB4CB1C41864DBEB73369C4
PackageDescription	G-code generator for 3D printers PrusaSlicer converts digital 3D models into printing instructions (G-code) for your 3D printer. It cuts the model into horizontal slices (layers), generates toolpaths to fill them and calculates the amount of material to be extruded. . PrusaSlicer supports input in the STL, AMF and OBJ formats, and can output G-code for several series of 3D printers, including RepRap, Ultimaker, Makerbot, as well as SVG files for DLP printers. . It can be used with a graphical interface, or in batch mode via the command-line.
PackageMaintainer	Debian 3-D Printing Packages <3dprinter-general@lists.alioth.debian.org>
PackageName	prusa-slicer
PackageSection	misc
PackageVersion	2.3.0+dfsg-1
SHA-1	204F702889574EB6D930EC7F7D57BC9FF489DD81
SHA-256	296E9110B34C719B49B505E215302E5F02B105A5D26694DD3953649DF9A37033

Key	Value
MD5	5CAD1AAE53C679BE9C0FE0898BD50872
PackageArch	x86_64
PackageDescription	PrusaSlicer takes 3D models (STL, OBJ, AMF) and converts them into G-code instructions for FFF printers or PNG layers for mSLA 3D printers. It's compatible with any modern printer based on the RepRap toolchain, including all those based on the Marlin, Prusa, Sprinter and Repetier firmware. It also works with Mach3, LinuxCNC and Machinekit controllers. PrusaSlicer is based on Slic3r by Alessandro Ranelucci and the RepRap community.
PackageMaintainer	Fedora Project
PackageName	prusa-slicer
PackageRelease	4.fc33
PackageVersion	2.2.0
SHA-1	2B00D0168B9E79B8ADD6EE543B2A94A6159F97D2
SHA-256	660B999E54545BD01E5A00BE342879899EFCB8DF101391636548D4CDC5497B74

Key	Value
FileSize	26325704
MD5	D4632D1355ED7842E9359D7A93FFF9A4
PackageDescription	G-code generator for 3D printers PrusaSlicer converts digital 3D models into printing instructions (G-code) for your 3D printer. It cuts the model into horizontal slices (layers), generates toolpaths to fill them and calculates the amount of material to be extruded. . PrusaSlicer supports input in the STL, AMF and OBJ formats, and can output G-code for several series of 3D printers, including RepRap, Ultimaker, Makerbot, as well as SVG files for DLP printers. . It can be used with a graphical interface, or in batch mode via the command-line.
PackageMaintainer	Debian 3-D Printing Packages <3dprinter-general@lists.alioth.debian.org>
PackageName	prusa-slicer
PackageSection	misc
PackageVersion	2.3.1+dfsg-1+b2
SHA-1	4197347A81689712493B443050E3D449D8A43A3B
SHA-256	E584BFDC0DE93D8E1250FDD2DD0BBF568625FFA70DBC572F27752D33FF59A218

Key	Value
FileSize	27664192
MD5	BD15A8E23EDA8F99341AB3EC6BFA0DF9
PackageDescription	G-code generator for 3D printers PrusaSlicer converts digital 3D models into printing instructions (G-code) for your 3D printer. It cuts the model into horizontal slices (layers), generates toolpaths to fill them and calculates the amount of material to be extruded. . PrusaSlicer supports input in the STL, AMF and OBJ formats, and can output G-code for several series of 3D printers, including RepRap, Ultimaker, Makerbot, as well as SVG files for DLP printers. . It can be used with a graphical interface, or in batch mode via the command-line.
PackageMaintainer	Debian 3-D Printing Packages <3dprinter-general@lists.alioth.debian.org>
PackageName	prusa-slicer
PackageSection	misc
PackageVersion	2.3.1+dfsg-1+b2
SHA-1	4A0CAD3E9A4AD862EFB4B4F9FE0AED68AFF9BF6B
SHA-256	44BE617268426E4F21EB36FEB591E167FEA5B2951A689A6A4564D36682DD1DCE

Key	Value
FileSize	26170588
MD5	3FB72FE2F36130139C06B78AD8D3B4AC
PackageDescription	G-code generator for 3D printers PrusaSlicer converts digital 3D models into printing instructions (G-code) for your 3D printer. It cuts the model into horizontal slices (layers), generates toolpaths to fill them and calculates the amount of material to be extruded. . PrusaSlicer supports input in the STL, AMF and OBJ formats, and can output G-code for several series of 3D printers, including RepRap, Ultimaker, Makerbot, as well as SVG files for DLP printers. . It can be used with a graphical interface, or in batch mode via the command-line.
PackageMaintainer	Debian 3-D Printing Packages <3dprinter-general@lists.alioth.debian.org>
PackageName	prusa-slicer
PackageSection	misc
PackageVersion	2.3.1+dfsg-1+b2
SHA-1	5745E3D366C3CDC9F5D144BC17459F94427D9537
SHA-256	54BA9775ACE5C60967963D68DD1D057D29967B5E4463630E7689818BFDCDE933